Vent-Axia Sensors and Switches

Select a product

For ventilation systems to be truly efficient it is important for them to operate only when needed. Our range of Sentinel demand ventilation systems along with our controls and sensors help respond to the exact ventilation requirements of a room at any one time. Providing airflow only when it is required and at the level that it is required ensures that only the energy that is needed is used; no more no less. Approved Document L now recognises the value that controls can offer and you will find Vent-Axia offer a range of solutions to ensure that you can maximise the benefit of automation where ever you chose to use it.

Image of Ambient Response Humidity Sensor Lo-Carbon
Ambient Response Humidity Sensor Lo-Carbon

Designed specifically for the Lo-Carbon product range. This self programming electronic On/Off wall mounted humidity sensor reacts to any rapid increase in humidity and temperature by switching a VentAxia fan ‘On’ for rapid removal of moisture laden air in domestic bathrooms and kitchens. Night time relative humidity increment setback feature suppresses nuisance tripping when the humidity level gradually rises as the temperature falls.

  • Pullcord override and neon indicator.
  • Changeover relay switch.
  • Operating range: 30%-90%RH.
  • Ambient operating temperature +5°C to +40°C.
  • Dimensions: 87 x 87 x 33mm (H x W x D).
  • Will fit single gang box for surface mounting.
Stock Ref. No: 563552
Please contact your relevant International Distributor for pricing and availability details.
Image of Ecotronic Humidity Sensor (Sentinel)
Ecotronic Humidity Sensor (Sentinel)

Humidity Control is automatic and can be set to switch between 65 and 90%RH. An integral pullcord provides a manual override function if required. Can be wired for either ON/OFF or Trickle Boost operation. Set Point adjustable. Maximum switching load 1 amp inductive. Pullcord override indicator Ambient operating temperature 0°C to +40°C. Dimensions:87 x 87 x 33mm (H x W x D). Supply voltage 24V DC SELV. Humidity sensors should be sited approx. 100mm below ceiling level and not above cupboards, refer to siting details in fitting and wiring instructions supplied with product.

Stock Ref. No: 432949
Please contact your relevant International Distributor for pricing and availability details.
Image of Vent-Axia HumidiSwitch
Vent-Axia HumidiSwitch

Operates Vent-Axia ventilating units on either a rise or a fall in humidity to control the damaging effects of condensation.

  • Concealed adjustment.
  • Setting range 20% to 80% RH.
  • Ambient operating temperature 0°C to +50°C.
  • Dimensions: 82 x 132 x 40mm (H x W x D).
  • Rating 2A (1A inductive).
  • Switching range 120-240V.
  • Designed for use with controllers with ‘Auto’ mode facility.
  • Single pole changeover contacts.
Stock Ref. No: 563501
Please contact your relevant International Distributor for pricing and availability details.
(Please call 0344 856 0590 0344 856 0590 for further availability information)
Image of Vent-Axia ThermoSwitch
Vent-Axia ThermoSwitch

Automatically switches On fans on either a rise or fall in air temperature. The ThermoSwitch can be used with all Vent-Axia fans (via switch gear if appropriate) for the removal of warm air from buildings. It can also be used to switch On Hi-Line ceiling fans for summer cooling and to move high level warm air down to the working level during winter.

  • Setting range: +6°C to +30°C.
  • Two internal range limit/locking rings are included to allow setting within a limited temperature range or locking at a fixed t/o point.
  • IP20 rated.
  • Sealed sensing mechanism.
  • Snap-action, single pole, changeover contacts.
  • Mounting direct on surface only.
  • Electrical connection to screw type terminals with rear or side cable entry.
  • Dimensions: 80 x 104 x 36mm (H x W x D).
  • Contact rating: 1.5 amp (inductive).
  • 16 amps (resistive).
  • Maximum voltage 250V.
Stock Ref. No: 563502
Please contact your relevant International Distributor for pricing and availability details.
Image of TIM2 Overrun Timer
TIM2 Overrun Timer
The TIM2 is a remote mounting electronic overrun timer with a relay output. 2 Amp indication load maximum. Adjustable overrun 2-30 mins. Ideal where fans are to be controlled in conjunction with a lighting circuit or activated by remote sensors. 76 x 76 x 41mm (H x W x D)
Stock Ref. No: 370346
Please contact your relevant International Distributor for pricing and availability details.
Image of Air Quality Sensor (AQS)
Air Quality Sensor (AQS)

Automatically reacts to the deterioration of air quality, sensing tobacco smoke, smells and toilet odours to regulate mechanically ventilated areas, such as cinemas, pubs, clubs, restaurants, kitchens, toilets and conference rooms. The sensor switches when the air quality declines below an adjustable preset level. This is registered by a self-cleaning ceramic sensing head. The air quality sensor should not be used for the detection of combustible gases. Ambient operating temperature range 0°C to +50°C. MIN - MAX mode or direct Damper control. Dimensions:87 x 157 x 47mm (H xWxD) Surface mounted. 1 - 25 min O/R timer. Supply voltage 24V DC SELV.

Stock Ref. No: 432953
Please contact your relevant International Distributor for pricing and availability details.
Image of Vent-Axia Visionex PIR
Vent-Axia Visionex PIR

A wall or ceiling mounted movement detector for use with any domestic Vent-Axia mains voltage product. Also suitable for use with Vent-Axia T-Series controllers on ‘Auto’ setting and ITC controllers on sensor mode. Visionex PIR can be wired for either On/Off or Trickle/ Boost operation.

  • Fits any UK single gang mounting box.
  • Adjustable timer overrun (5-25 minutes).
  • Range of detection up to 10 metres.
  • Designed to meet IP43.
  • Ambient operating temperature range 0°C to +50°C.
  • Maximum load: 2.5 amps/600W inductive. Not suitable for use with lighting.
  • Internal use only.
  • No switched live required for internal rooms and WCs.
  • Double insulated.
  • Volt-free contacts.
  • Supply voltage 220-240V/1/50Hz.
Stock Ref. No: 459623A
(Please call 0344 856 0590 0344 856 0590 for further availability information)
Image of 7 Day TimeSwitch
7 Day TimeSwitch

For applications where regular switching is required at fixed periods or at different times on different days of the week, eg: offices, shops, pubs and restaurants.

The 7-day TimeSwitch gives twelve On or Off positions per day and can be set for 7 days. The cycle will repeat until changed.

  • Analogue clock display and integral time switches for ease of setting.
  • Manual override.
  • Removable clear plastic cover protects TimeSwitch face.
  • Volt free changeover contacts.
  • Time base: 7 days.
  • Shortest switching time: 2 hours.
  • Maximum load: 16amp resistive (8amp inductive).
  • Ambient operating temperature range -20°C to +85°C.
  • Dimensions: 104 x 74 x 52mm (H x W x D).
  • Supply voltage 220-240V/1/50Hz
Stock Ref. No: 563515
Please contact your relevant International Distributor for pricing and availability details.
(Please call 0344 856 0590 0344 856 0590 for further availability information)
Image of TimeSpan Controller
TimeSpan Controller
Adjustable timer with overrun facility for fans ventilating WCs and other small rooms. For use with any Vent-Axia fan within maximum rating shown.The fan is switched On with the light and keeps running for a pre-set period after the light is switched Off. Features & Benefits: Adjustable time delay 5-25 minutes from the back. Ambient operating temp range 0°C to +40°C. BEAB Approved. Dimensions: 87 x 87 x 33mm (H x W x D). Fits to any single gang box. Maximum load 250W inductive. Supply voltage 220-240V/1/50Hz Downloads Catalogue Pages
Stock Ref. No: 563519
Please contact your relevant International Distributor for pricing and availability details.
(Please call 0344 856 0590 0344 856 0590 for further availability information)
Image of Ambient Response SELV 12 Humidity Sensor
Ambient Response SELV 12 Humidity Sensor

12VAC 50Hz. 

Stock Ref. No: 563551
Please contact your relevant International Distributor for pricing and availability details.
Image of Ecotronic SELV 12 Humidity Sensor
Ecotronic SELV 12 Humidity Sensor

12V Safety Extra Low Voltage version for use with VA100 SELV, Solo SELV, and LuminAir SELV range. Incorporates changeover switch to select low/high speed.

Although suitable for siting within reach of a shower or bath we recommend this model is located out of the spray zone of a bath or shower.

  • Setting range 65% - 90%RH.
  • Maximum switching load 5.6A @ 12V AC.
  • Pullcord override indicated by lamp.
  • Ambient operating temperature 0°C to +40°C.
  • Dimensions: 87 x 87 x 33mm (H x W x D).
  • Supply voltage 12V AC.
Stock Ref. No: 563531
Please contact your relevant International Distributor for pricing and availability details.
Image of Guardian Personnel Detector (PIR Sensor)
Guardian Personnel Detector (PIR Sensor)

Suitable for controlling a range of Vent-Axia fans. Continuously monitors an area and activates when a moving body is detected.

  • Supplied complete with wall mounting bracket.
  • Adjustable timer overrun (5 seconds to 20 minutes).
  • Supplied with lens to provide 15m (max) range, 200° detection area.
  • Designed to meet IP55.
  • Ambient operating temperature range -20°C to +50°C.
  • Maximum load: 10 amp resistive (5 amp inductive).
  • Suitable for use with fluorescent lighting up to 500W.
  • Internal/External use.
  • Supply voltage 220-240V/1/50Hz.
Stock Ref. No: 563548
Please contact your relevant International Distributor for pricing and availability details.
Image of 1.5 Amp Electronic Controller
1.5 Amp Electronic Controller
Surface mounting. It will provide infinitely variable speed control and features an On/Off/sensor slider with neon indicator. There is an adjustable minimum speed setting. The controller is radio suppressed to BS EN 55014 and electrical connections for use with suitable external sensors are provided. 86 x 156 x 53mm (H x W x D). For flush fitting a metal wall box accessory is available. Hole for wall box:80x150x150mm (HxWxD)
Stock Ref. No: W300310
Please contact your relevant International Distributor for pricing and availability details.
Image of Vent-Axia Visionex SELV 12 PIR
Vent-Axia Visionex SELV 12 PIR

A wall or ceiling mounted movement detector for use with any domestic Vent-Axia SELV 12 product.

  • Fits any UK single gang mounting box.
  • Adjustable timer overrun (5-25 minutes).
  • Range of detection up to 10 metres.
  • Designed to meet IP43.
  • Ambient operating temperature range 0°C to +50°C.
  • Maximum load: 5.6 amps inductive @ 12V.
  • Internal use only.
  • No switched live required for internal rooms and WCs.
  • Class III product.
  • Volt-free contacts.
  • Supply voltage 12V/1/50Hz.
Stock Ref. No: 459624
(Please call 0344 856 0590 0344 856 0590 for further availability information)
Image of 3 Pole Isolator
3 Pole Isolator

Isolates Live, Neutral and Switched Live for integral timer fans. 6 amp, 3 pole isolator complying to the 3mm contact separation requirement for routine maintenance repair

Stock Ref. No: 563518
Please contact your relevant International Distributor for pricing and availability details.
Image of Remote Delay Timer
Remote Delay Timer

A remote delay timer for use with all domestic products gives the option of offering a 2 minute delay before the fan starts. Once the fan has started the overrun timer is adjustable between 5-25 minutes.

Stock Ref. No: 457986
Please contact your relevant International Distributor for pricing and availability details.
Image of Fan Speed Adjuster
Fan Speed Adjuster

5 step speed adjuster for domestic kitchen extract fans, that can reduce the speed to 40% of its maximum performance. 91mm x 176mm x 85mm (WxHxD).

Stock Ref. No: 458153
Please contact your relevant International Distributor for pricing and availability details.
Image of Electronic Timer for Heating & Ventilation Control
Electronic Timer for Heating & Ventilation Control
The New Vent-Axia Electronic Timer allows an appliance to be powered for a set time period, and shows the user how much time is left. The timing-out period is adjustable between 15 minutes and 2 hours in 15 minute increments. The LED easy read display shows how much time is left to run during operation. The unit has a powerful 20 Amp output rating for heating, which is ideal to control immersion heaters and panel heaters, and it can also be used for fans. The On/Off button allows the user to cancel the timing during operation. The timer has intelligent memory, remembering the last timing period set. Downloads Catalogue Pages
Stock Ref. No: 426415
(Please call 0344 856 0590 0344 856 0590 for further availability information)
Image of HR500 Controller
HR500 Controller

With knockouts for recessed wiring or surface wiring. An optional flush fitting box is available. Requires 5-core cable. One controller will operate a maximum of 2 HR500 or HR500X units. On/Off/Sensor mode. Choice of heat exchange or high/low speed extract fan mode. Infinitely variable speed control from low to high. Adjustable minimum speed. With integral thermal cut-out and circuit fuse protection.

Stock Ref. No: W14301010
Please contact your relevant International Distributor for pricing and availability details.
(Please call 0344 856 0590 0344 856 0590 for further availability information)
Image of Trickle Boost Switch
Trickle Boost Switch
A single gang switch to boost from high to low speeds on heat recovery systems. 85 x 85 x 10mm (H x W x D)
Stock Ref. No: 455213
Please contact your relevant International Distributor for pricing and availability details.
Image of 2-Way Switch and Neons
2-Way Switch and Neons

A double gang switch to boost from high to low speeds on heat recovery systems, incorporating neon lights to indicate speed settings. 85 x 145 x 10mm (H x W x D)

Stock Ref. No: 459746
Please contact your relevant International Distributor for pricing and availability details.
(Please call 0344 856 0590 0344 856 0590 for further availability information)
Image of VCON6
VCON6

A double gang switch to boost from high to low speeds.

85 x 145 x 10mm (H x W x D).

Stock Ref. No: 370356
Please contact your relevant International Distributor for pricing and availability details.
(Please call 0344 856 0590 0344 856 0590 for further availability information)
Image of 150VA Transformer
150VA Transformer
Surface Mounting Transformer with six voltage selections for trickle settings to match dwelling volume. Provides Boost/Trickle ventilation when used with humidity sensors or a manual switch. 95 x 225 x 75mm (H x W x D)
Stock Ref. No: 563538A
Please contact your relevant International Distributor for pricing and availability details.
Image of Normal Boost Purge Switch
Normal Boost Purge Switch

A single gang switch to operate between normal, boost and purge settings.

85 x 85 x 10mm (H x W x D)

Stock Ref. No: 5108454
Please contact your relevant International Distributor for pricing and availability details.
Ventwise Temperature Sensor 6m
Temperature sensor for use with Ventwise Controller. 6 metre lead length
Stock Ref. No: 435958
(Please call 0344 856 0590 0344 856 0590 for further availability information)
Image of Sentinel Kinetic Wired Remote Controller
Sentinel Kinetic Wired Remote Controller
The Kinetic Wired Remote Controller duplicates all the functions of the on-board controller allowing the unit to be commissioned, controlled and monitored remotely. The controller is supplied with 15 metres of four core cable fitted with an RJ11 plug for fitting to the Kinetic control pcb.
Stock Ref. No: 443283
Please contact your relevant International Distributor for pricing and availability details.
Kinetic Vent Wise Controller

The award wining Vent Wise controller has been designed to fully automate a ventilation system. The unit can be used to switch the unit between trickle and boost speed. The controller saves energy by only switching when cooking is taking place or condensation is being generated. The current sensor detects when the power supply to an oven or hob is switched on. The temperature sensor detects the rise in temperature in the hot feed to a bath or shower. A combination of up to three sensors may be used with one controller This controller consists of a small pcb which is plugged onto the control board alongside the terminal connectors. This converts switches 1 to 3 into sensor inputs. A combination of up to three current and/or temperature sensors can then be connected.

Stock Ref. No: 441780
Please contact your relevant International Distributor for pricing and availability details.
This Model no longer available
Ventwise Current Sensor 4m
Current sensor for use with Ventwise Controller. 4 metre lead length
Stock Ref. No: 435994
(Please call 0344 856 0590 0344 856 0590 for further availability information)
Ventwise Current Sensor 6m
Current sensor for use with Ventwise Controller. 6 metre lead length
Stock Ref. No: 435956
Please contact your relevant International Distributor for pricing and availability details.
Ventwise Current Sensor 12m
Current sensor for use with Ventwise Controller. 12 metre lead length
Stock Ref. No: 435957
Please contact your relevant International Distributor for pricing and availability details.
(Please call 0344 856 0590 0344 856 0590 for further availability information)
Ventwise Temperature Sensor 4m
Temperature sensor for use with Ventwise Controller. 4 metre lead length
Stock Ref. No: 435995
(Please call 0344 856 0590 0344 856 0590 for further availability information)
Image of Momentary Push Switch
Momentary Push Switch
Compatible with the Sentinel Kinetic range, the momentary switch boosts the unit for 30 minutes. 85 x 85 x 10mm (H x W x D)
Stock Ref. No: 448929
Please contact your relevant International Distributor for pricing and availability details.
Image of LED Indicator
LED Indicator
Compatible with the Sentinel Kinetic range, the LED Indicator illuminates when the MVHR unit requires a filter check or if the unit has a fault. Supplied with 15 metres of cable. 85 x 85 x 10mm (H x W x D)
Stock Ref. No: 448356
Please contact your relevant International Distributor for pricing and availability details.
Image of Normal Boost Switch - Stainless Steel
Normal Boost Switch - Stainless Steel
A single gang switch to operate normal/boost functions on MVHR systems. Brushed stainless steel finish. 90 x 90 x 18mm (H x W x D)
Stock Ref. No: 437320
Please contact your relevant International Distributor for pricing and availability details.
Image of 3 Speed Controller
3 Speed Controller

A three position rotary control which enables the unit to be manually switched from permanent trickle ventilation to either medium or boost speed.

85 x 85 x 25mm ( H x W x D ). 85 x 85 x 37mm ( H x W x D ): with rotary switch.

Stock Ref. No: 563533
Please contact your relevant International Distributor for pricing and availability details.
(Please call 0344 856 0590 0344 856 0590 for further availability information)
Image of Isolator Relay Controller
Isolator Relay Controller
Allows fan unit to be isolated from other mains circuit when used with TIM2, Trickle/Boost switch or light switch control.
Stock Ref. No: 442030
Please contact your relevant International Distributor for pricing and availability details.

 

Raadpleeg de tab Downloads voor technische informatie

 

 

ESTIMATED RUNNING COSTS

Calculate estimated running costs for this product using the tool below.
For average costs, leave the default values in place or enter your own figures in the boxes to recalculate.
Where a product has multi speeds, a typical installation has been used for the below calculations.


pence
(Your current electricity cost in pence per hour. This will be listed on your electric bill)
hours
(The average number of hours per day fan to run in Trickle mode)
hours
(The average number of hours per day fan to run in Boost mode)

Based on the inputted figures, estimated running costs would be:

Overview

For ventilation systems to be truly efficient it is important for them to operate only when needed. Our range of Sentinel demand ventilation systems along with our controls and sensors help respond to the exact ventilation requirements of a room at any one time. Providing airflow only when it is required and at the level that it is required ensures that only the energy that is needed is used; no more no less. Approved Document L now recognises the value that controls can offer and you will find Vent-Axia offer a range of solutions to ensure that you can maximise the benefit of automation where ever you chose to use it.

Technical

Models

Image of Ambient Response Humidity Sensor Lo-Carbon
Ambient Response Humidity Sensor Lo-Carbon

Designed specifically for the Lo-Carbon product range. This self programming electronic On/Off wall mounted humidity sensor reacts to any rapid increase in humidity and temperature by switching a VentAxia fan ‘On’ for rapid removal of moisture laden air in domestic bathrooms and kitchens. Night time relative humidity increment setback feature suppresses nuisance tripping when the humidity level gradually rises as the temperature falls.

  • Pullcord override and neon indicator.
  • Changeover relay switch.
  • Operating range: 30%-90%RH.
  • Ambient operating temperature +5°C to +40°C.
  • Dimensions: 87 x 87 x 33mm (H x W x D).
  • Will fit single gang box for surface mounting.
Stock Ref. No: 563552
Please contact your relevant International Distributor for pricing and availability details.
Image of Ecotronic Humidity Sensor (Sentinel)
Ecotronic Humidity Sensor (Sentinel)

Humidity Control is automatic and can be set to switch between 65 and 90%RH. An integral pullcord provides a manual override function if required. Can be wired for either ON/OFF or Trickle Boost operation. Set Point adjustable. Maximum switching load 1 amp inductive. Pullcord override indicator Ambient operating temperature 0°C to +40°C. Dimensions:87 x 87 x 33mm (H x W x D). Supply voltage 24V DC SELV. Humidity sensors should be sited approx. 100mm below ceiling level and not above cupboards, refer to siting details in fitting and wiring instructions supplied with product.

Stock Ref. No: 432949
Please contact your relevant International Distributor for pricing and availability details.
Image of Vent-Axia HumidiSwitch
Vent-Axia HumidiSwitch

Operates Vent-Axia ventilating units on either a rise or a fall in humidity to control the damaging effects of condensation.

  • Concealed adjustment.
  • Setting range 20% to 80% RH.
  • Ambient operating temperature 0°C to +50°C.
  • Dimensions: 82 x 132 x 40mm (H x W x D).
  • Rating 2A (1A inductive).
  • Switching range 120-240V.
  • Designed for use with controllers with ‘Auto’ mode facility.
  • Single pole changeover contacts.
Stock Ref. No: 563501
Please contact your relevant International Distributor for pricing and availability details.
(Please call 0344 856 0590 0344 856 0590 for further availability information)
Image of Vent-Axia ThermoSwitch
Vent-Axia ThermoSwitch

Automatically switches On fans on either a rise or fall in air temperature. The ThermoSwitch can be used with all Vent-Axia fans (via switch gear if appropriate) for the removal of warm air from buildings. It can also be used to switch On Hi-Line ceiling fans for summer cooling and to move high level warm air down to the working level during winter.

  • Setting range: +6°C to +30°C.
  • Two internal range limit/locking rings are included to allow setting within a limited temperature range or locking at a fixed t/o point.
  • IP20 rated.
  • Sealed sensing mechanism.
  • Snap-action, single pole, changeover contacts.
  • Mounting direct on surface only.
  • Electrical connection to screw type terminals with rear or side cable entry.
  • Dimensions: 80 x 104 x 36mm (H x W x D).
  • Contact rating: 1.5 amp (inductive).
  • 16 amps (resistive).
  • Maximum voltage 250V.
Stock Ref. No: 563502
Please contact your relevant International Distributor for pricing and availability details.
Image of TIM2 Overrun Timer
TIM2 Overrun Timer
The TIM2 is a remote mounting electronic overrun timer with a relay output. 2 Amp indication load maximum. Adjustable overrun 2-30 mins. Ideal where fans are to be controlled in conjunction with a lighting circuit or activated by remote sensors. 76 x 76 x 41mm (H x W x D)
Stock Ref. No: 370346
Please contact your relevant International Distributor for pricing and availability details.
Image of Air Quality Sensor (AQS)
Air Quality Sensor (AQS)

Automatically reacts to the deterioration of air quality, sensing tobacco smoke, smells and toilet odours to regulate mechanically ventilated areas, such as cinemas, pubs, clubs, restaurants, kitchens, toilets and conference rooms. The sensor switches when the air quality declines below an adjustable preset level. This is registered by a self-cleaning ceramic sensing head. The air quality sensor should not be used for the detection of combustible gases. Ambient operating temperature range 0°C to +50°C. MIN - MAX mode or direct Damper control. Dimensions:87 x 157 x 47mm (H xWxD) Surface mounted. 1 - 25 min O/R timer. Supply voltage 24V DC SELV.

Stock Ref. No: 432953
Please contact your relevant International Distributor for pricing and availability details.
Image of Vent-Axia Visionex PIR
Vent-Axia Visionex PIR

A wall or ceiling mounted movement detector for use with any domestic Vent-Axia mains voltage product. Also suitable for use with Vent-Axia T-Series controllers on ‘Auto’ setting and ITC controllers on sensor mode. Visionex PIR can be wired for either On/Off or Trickle/ Boost operation.

  • Fits any UK single gang mounting box.
  • Adjustable timer overrun (5-25 minutes).
  • Range of detection up to 10 metres.
  • Designed to meet IP43.
  • Ambient operating temperature range 0°C to +50°C.
  • Maximum load: 2.5 amps/600W inductive. Not suitable for use with lighting.
  • Internal use only.
  • No switched live required for internal rooms and WCs.
  • Double insulated.
  • Volt-free contacts.
  • Supply voltage 220-240V/1/50Hz.
Stock Ref. No: 459623A
(Please call 0344 856 0590 0344 856 0590 for further availability information)
Image of 7 Day TimeSwitch
7 Day TimeSwitch

For applications where regular switching is required at fixed periods or at different times on different days of the week, eg: offices, shops, pubs and restaurants.

The 7-day TimeSwitch gives twelve On or Off positions per day and can be set for 7 days. The cycle will repeat until changed.

  • Analogue clock display and integral time switches for ease of setting.
  • Manual override.
  • Removable clear plastic cover protects TimeSwitch face.
  • Volt free changeover contacts.
  • Time base: 7 days.
  • Shortest switching time: 2 hours.
  • Maximum load: 16amp resistive (8amp inductive).
  • Ambient operating temperature range -20°C to +85°C.
  • Dimensions: 104 x 74 x 52mm (H x W x D).
  • Supply voltage 220-240V/1/50Hz
Stock Ref. No: 563515
Please contact your relevant International Distributor for pricing and availability details.
(Please call 0344 856 0590 0344 856 0590 for further availability information)
Image of TimeSpan Controller
TimeSpan Controller
Adjustable timer with overrun facility for fans ventilating WCs and other small rooms. For use with any Vent-Axia fan within maximum rating shown.The fan is switched On with the light and keeps running for a pre-set period after the light is switched Off. Features & Benefits: Adjustable time delay 5-25 minutes from the back. Ambient operating temp range 0°C to +40°C. BEAB Approved. Dimensions: 87 x 87 x 33mm (H x W x D). Fits to any single gang box. Maximum load 250W inductive. Supply voltage 220-240V/1/50Hz Downloads Catalogue Pages
Stock Ref. No: 563519
Please contact your relevant International Distributor for pricing and availability details.
(Please call 0344 856 0590 0344 856 0590 for further availability information)
Image of Ambient Response SELV 12 Humidity Sensor
Ambient Response SELV 12 Humidity Sensor

12VAC 50Hz. 

Stock Ref. No: 563551
Please contact your relevant International Distributor for pricing and availability details.
Image of Ecotronic SELV 12 Humidity Sensor
Ecotronic SELV 12 Humidity Sensor

12V Safety Extra Low Voltage version for use with VA100 SELV, Solo SELV, and LuminAir SELV range. Incorporates changeover switch to select low/high speed.

Although suitable for siting within reach of a shower or bath we recommend this model is located out of the spray zone of a bath or shower.

  • Setting range 65% - 90%RH.
  • Maximum switching load 5.6A @ 12V AC.
  • Pullcord override indicated by lamp.
  • Ambient operating temperature 0°C to +40°C.
  • Dimensions: 87 x 87 x 33mm (H x W x D).
  • Supply voltage 12V AC.
Stock Ref. No: 563531
Please contact your relevant International Distributor for pricing and availability details.
Image of Guardian Personnel Detector (PIR Sensor)
Guardian Personnel Detector (PIR Sensor)

Suitable for controlling a range of Vent-Axia fans. Continuously monitors an area and activates when a moving body is detected.

  • Supplied complete with wall mounting bracket.
  • Adjustable timer overrun (5 seconds to 20 minutes).
  • Supplied with lens to provide 15m (max) range, 200° detection area.
  • Designed to meet IP55.
  • Ambient operating temperature range -20°C to +50°C.
  • Maximum load: 10 amp resistive (5 amp inductive).
  • Suitable for use with fluorescent lighting up to 500W.
  • Internal/External use.
  • Supply voltage 220-240V/1/50Hz.
Stock Ref. No: 563548
Please contact your relevant International Distributor for pricing and availability details.
Image of 1.5 Amp Electronic Controller
1.5 Amp Electronic Controller
Surface mounting. It will provide infinitely variable speed control and features an On/Off/sensor slider with neon indicator. There is an adjustable minimum speed setting. The controller is radio suppressed to BS EN 55014 and electrical connections for use with suitable external sensors are provided. 86 x 156 x 53mm (H x W x D). For flush fitting a metal wall box accessory is available. Hole for wall box:80x150x150mm (HxWxD)
Stock Ref. No: W300310
Please contact your relevant International Distributor for pricing and availability details.
Image of Vent-Axia Visionex SELV 12 PIR
Vent-Axia Visionex SELV 12 PIR

A wall or ceiling mounted movement detector for use with any domestic Vent-Axia SELV 12 product.

  • Fits any UK single gang mounting box.
  • Adjustable timer overrun (5-25 minutes).
  • Range of detection up to 10 metres.
  • Designed to meet IP43.
  • Ambient operating temperature range 0°C to +50°C.
  • Maximum load: 5.6 amps inductive @ 12V.
  • Internal use only.
  • No switched live required for internal rooms and WCs.
  • Class III product.
  • Volt-free contacts.
  • Supply voltage 12V/1/50Hz.
Stock Ref. No: 459624
(Please call 0344 856 0590 0344 856 0590 for further availability information)
Image of 3 Pole Isolator
3 Pole Isolator

Isolates Live, Neutral and Switched Live for integral timer fans. 6 amp, 3 pole isolator complying to the 3mm contact separation requirement for routine maintenance repair

Stock Ref. No: 563518
Please contact your relevant International Distributor for pricing and availability details.
Image of Remote Delay Timer
Remote Delay Timer

A remote delay timer for use with all domestic products gives the option of offering a 2 minute delay before the fan starts. Once the fan has started the overrun timer is adjustable between 5-25 minutes.

Stock Ref. No: 457986
Please contact your relevant International Distributor for pricing and availability details.
Image of Fan Speed Adjuster
Fan Speed Adjuster

5 step speed adjuster for domestic kitchen extract fans, that can reduce the speed to 40% of its maximum performance. 91mm x 176mm x 85mm (WxHxD).

Stock Ref. No: 458153
Please contact your relevant International Distributor for pricing and availability details.
Image of Electronic Timer for Heating & Ventilation Control
Electronic Timer for Heating & Ventilation Control
The New Vent-Axia Electronic Timer allows an appliance to be powered for a set time period, and shows the user how much time is left. The timing-out period is adjustable between 15 minutes and 2 hours in 15 minute increments. The LED easy read display shows how much time is left to run during operation. The unit has a powerful 20 Amp output rating for heating, which is ideal to control immersion heaters and panel heaters, and it can also be used for fans. The On/Off button allows the user to cancel the timing during operation. The timer has intelligent memory, remembering the last timing period set. Downloads Catalogue Pages
Stock Ref. No: 426415
(Please call 0344 856 0590 0344 856 0590 for further availability information)
Image of HR500 Controller
HR500 Controller

With knockouts for recessed wiring or surface wiring. An optional flush fitting box is available. Requires 5-core cable. One controller will operate a maximum of 2 HR500 or HR500X units. On/Off/Sensor mode. Choice of heat exchange or high/low speed extract fan mode. Infinitely variable speed control from low to high. Adjustable minimum speed. With integral thermal cut-out and circuit fuse protection.

Stock Ref. No: W14301010
Please contact your relevant International Distributor for pricing and availability details.
(Please call 0344 856 0590 0344 856 0590 for further availability information)
Image of Trickle Boost Switch
Trickle Boost Switch
A single gang switch to boost from high to low speeds on heat recovery systems. 85 x 85 x 10mm (H x W x D)
Stock Ref. No: 455213
Please contact your relevant International Distributor for pricing and availability details.
Image of 2-Way Switch and Neons
2-Way Switch and Neons

A double gang switch to boost from high to low speeds on heat recovery systems, incorporating neon lights to indicate speed settings. 85 x 145 x 10mm (H x W x D)

Stock Ref. No: 459746
Please contact your relevant International Distributor for pricing and availability details.
(Please call 0344 856 0590 0344 856 0590 for further availability information)
Image of VCON6
VCON6

A double gang switch to boost from high to low speeds.

85 x 145 x 10mm (H x W x D).

Stock Ref. No: 370356
Please contact your relevant International Distributor for pricing and availability details.
(Please call 0344 856 0590 0344 856 0590 for further availability information)
Image of 150VA Transformer
150VA Transformer
Surface Mounting Transformer with six voltage selections for trickle settings to match dwelling volume. Provides Boost/Trickle ventilation when used with humidity sensors or a manual switch. 95 x 225 x 75mm (H x W x D)
Stock Ref. No: 563538A
Please contact your relevant International Distributor for pricing and availability details.
Image of Normal Boost Purge Switch
Normal Boost Purge Switch

A single gang switch to operate between normal, boost and purge settings.

85 x 85 x 10mm (H x W x D)

Stock Ref. No: 5108454
Please contact your relevant International Distributor for pricing and availability details.
Ventwise Temperature Sensor 6m
Temperature sensor for use with Ventwise Controller. 6 metre lead length
Stock Ref. No: 435958
(Please call 0344 856 0590 0344 856 0590 for further availability information)
Image of Sentinel Kinetic Wired Remote Controller
Sentinel Kinetic Wired Remote Controller
The Kinetic Wired Remote Controller duplicates all the functions of the on-board controller allowing the unit to be commissioned, controlled and monitored remotely. The controller is supplied with 15 metres of four core cable fitted with an RJ11 plug for fitting to the Kinetic control pcb.
Stock Ref. No: 443283
Please contact your relevant International Distributor for pricing and availability details.
Kinetic Vent Wise Controller

The award wining Vent Wise controller has been designed to fully automate a ventilation system. The unit can be used to switch the unit between trickle and boost speed. The controller saves energy by only switching when cooking is taking place or condensation is being generated. The current sensor detects when the power supply to an oven or hob is switched on. The temperature sensor detects the rise in temperature in the hot feed to a bath or shower. A combination of up to three sensors may be used with one controller This controller consists of a small pcb which is plugged onto the control board alongside the terminal connectors. This converts switches 1 to 3 into sensor inputs. A combination of up to three current and/or temperature sensors can then be connected.

Stock Ref. No: 441780
Please contact your relevant International Distributor for pricing and availability details.
This Model no longer available
Ventwise Current Sensor 4m
Current sensor for use with Ventwise Controller. 4 metre lead length
Stock Ref. No: 435994
(Please call 0344 856 0590 0344 856 0590 for further availability information)
Ventwise Current Sensor 6m
Current sensor for use with Ventwise Controller. 6 metre lead length
Stock Ref. No: 435956
Please contact your relevant International Distributor for pricing and availability details.
Ventwise Current Sensor 12m
Current sensor for use with Ventwise Controller. 12 metre lead length
Stock Ref. No: 435957
Please contact your relevant International Distributor for pricing and availability details.
(Please call 0344 856 0590 0344 856 0590 for further availability information)
Ventwise Temperature Sensor 4m
Temperature sensor for use with Ventwise Controller. 4 metre lead length
Stock Ref. No: 435995
(Please call 0344 856 0590 0344 856 0590 for further availability information)
Image of Momentary Push Switch
Momentary Push Switch
Compatible with the Sentinel Kinetic range, the momentary switch boosts the unit for 30 minutes. 85 x 85 x 10mm (H x W x D)
Stock Ref. No: 448929
Please contact your relevant International Distributor for pricing and availability details.
Image of LED Indicator
LED Indicator
Compatible with the Sentinel Kinetic range, the LED Indicator illuminates when the MVHR unit requires a filter check or if the unit has a fault. Supplied with 15 metres of cable. 85 x 85 x 10mm (H x W x D)
Stock Ref. No: 448356
Please contact your relevant International Distributor for pricing and availability details.
Image of Normal Boost Switch - Stainless Steel
Normal Boost Switch - Stainless Steel
A single gang switch to operate normal/boost functions on MVHR systems. Brushed stainless steel finish. 90 x 90 x 18mm (H x W x D)
Stock Ref. No: 437320
Please contact your relevant International Distributor for pricing and availability details.
Image of 3 Speed Controller
3 Speed Controller

A three position rotary control which enables the unit to be manually switched from permanent trickle ventilation to either medium or boost speed.

85 x 85 x 25mm ( H x W x D ). 85 x 85 x 37mm ( H x W x D ): with rotary switch.

Stock Ref. No: 563533
Please contact your relevant International Distributor for pricing and availability details.
(Please call 0344 856 0590 0344 856 0590 for further availability information)
Image of Isolator Relay Controller
Isolator Relay Controller
Allows fan unit to be isolated from other mains circuit when used with TIM2, Trickle/Boost switch or light switch control.
Stock Ref. No: 442030
Please contact your relevant International Distributor for pricing and availability details.

Downloads