Vent-Axia Minivent - Ducted Bath/Shower Fan Kit

IP44 rated.
Powerful axial in-line fan with downstream airflow guide vanes.
Complete kit supplied.
Simple installation.
Meets Building Regulation Requirements for WC’s.
Integral timer version, set at 15 minute overrun.
FAQs Answered:

Roof, wall and soffit termination accessories can be used.
Suitable for use with remote humidistats where required.
To prevent backdraughts fit a Quick fix airflow shutter.
A 15 minute overrun timer version is available (SKT).
Maximum recommended length of ducting: 3 metre (supplied).
 

Select a product

The Vent-Axia Minivent ducted bath/shower kit includes all the components necessary to install a ducted 100mm system in one box. This simplifies fitting of an efficient ventilation system to small rooms, including bath and shower rooms and WC's. It is especially suitable for en-suite bathrooms.

The fan kit has ample performance to meet the Building Regulations Requirements for WC's. The timer version should be used for internal rooms.

The kit consists of a Minivent IP44 In-Line fan, a white ceiling grille and spigot, 3 metres* of flexible duct and an external louvre for soffit or wall mounting. The duct should be cut to the required length and the bend radius kept to a maximum to provide the best fan performance.

Enclosed terminal compartment, Class 1 earthed appliance.
Supply voltage 220-240/1/50Hz.

Built-in Controls
Timer Model
15 minute overrun timer complies with Building Regulations Document F. The timer is triggered by the lighting circuit. Pre-wired for easy installation.

Operation:  
Minivent SK via light switch
Minivent SKT via light switch timer overrun facility

PERFORMANCE:

Performance

DIMENSIONS:

  A ØB C (Timer)
mm 80 98 115
Image of Lo-Carbon MiniVent B
Lo-Carbon MiniVent B
Comprises - high output tube fan, 3 metres of flexible duct, ceiling inlet grille and spigot, soffit/ wall outlet grille.
Please call 0344 856 0590 for further availability information.
Image of Lo-Carbon MiniVent T
Lo-Carbon MiniVent T
Comprises - high output tube fan, 3 metres of flexible duct, ceiling inlet grille and spigot, soffit/ wall outlet grille.
Please call 0344 856 0590 for further availability information.
Image of Air Replacement Grille Set (Ivory)
Air Replacement Grille Set (Ivory)
Suitable for fitting to doors and panels to allow better internal air circulation and replacement. Consists of a two-piece telescopic set, which fits unobtrusively on either side of the door panel. Minimum fixing thickness 30mm. Plastic. Dimensions: 454 x 90mm.
Please call 0344 856 0590 for further availability information.
Image of Air Replacement Grille Set (Brown)
Air Replacement Grille Set (Brown)
Suitable for fitting to doors and panels to allow better internal air circulation and replacement. Consists of a two-piece telescopic set, which fits unobtrusively on either side of the door panel. Minimum fixing thickness 30mm. Plastic. Dimensions: 454 x 90mm.
Please call 0344 856 0590 for further availability information.
Image of Ambient Response Humidity Sensor Lo-Carbon
Ambient Response Humidity Sensor Lo-Carbon
Designed specifically for the Lo-Carbon product range. The latest self programming electronic On/Off wall mounted humidity sensor which reacts to any rapid increase in humidity and temperature by switching a Vent-Axia fan ‘On’ for rapid removal of moisture laden air, in domestic bathrooms and kitchens. Night time RH increment setback feature suppresses nuisance ripping when the humidity level gradually rises as the temperature falls. Features & Benefits: Ambient operating temp range +5°C to +40°C. Changeover relay switch. DEMKO Approved. Dimensions: 87 x 87 x 33mm (H x W x D). Operating range: 30%-90% RH. Pullcord override and neon indicator. Will fit single gang box for surface mounting. Downloads Catalogue Pages
Please call 0344 856 0590 for further availability information.
Image of Ecotronic Humidity Sensor (Sentinel)
Ecotronic Humidity Sensor (Sentinel)
Humidity Control is automatic and can be set to switch between 65 and 90%RH. An integral pullcord provides a manual override function if required. Can be wired for either ON/OFF or Trickle Boost operation. Set Point adjustable. Maximum switching load 1 amp inductive. Pullcord override indicator Ambient operating temperature 0°C to +40°C. Dimensions:87 x 87 x 33mm (H x W x D). Supply voltage 24V DC SELV. Humidity sensors should be sited approx. 100mm below ceiling level and not above cupboards, refer to siting details in fitting and wiring instructions supplied with product.
Please call 0344 856 0590 for further availability information.

 

Raadpleeg de tab Downloads voor technische informatie

 

 

Overview

The Vent-Axia Minivent ducted bath/shower kit includes all the components necessary to install a ducted 100mm system in one box. This simplifies fitting of an efficient ventilation system to small rooms, including bath and shower rooms and WC's. It is especially suitable for en-suite bathrooms.

The fan kit has ample performance to meet the Building Regulations Requirements for WC's. The timer version should be used for internal rooms.

The kit consists of a Minivent IP44 In-Line fan, a white ceiling grille and spigot, 3 metres* of flexible duct and an external louvre for soffit or wall mounting. The duct should be cut to the required length and the bend radius kept to a maximum to provide the best fan performance.

Enclosed terminal compartment, Class 1 earthed appliance.
Supply voltage 220-240/1/50Hz.

Built-in Controls
Timer Model
15 minute overrun timer complies with Building Regulations Document F. The timer is triggered by the lighting circuit. Pre-wired for easy installation.

Operation:  
Minivent SK via light switch
Minivent SKT via light switch timer overrun facility

Technical

PERFORMANCE:

Performance

DIMENSIONS:

  A ØB C (Timer)
mm 80 98 115

Models

Image of Lo-Carbon MiniVent B
Lo-Carbon MiniVent B
Comprises - high output tube fan, 3 metres of flexible duct, ceiling inlet grille and spigot, soffit/ wall outlet grille.
Please call 0344 856 0590 for further availability information.
Image of Lo-Carbon MiniVent T
Lo-Carbon MiniVent T
Comprises - high output tube fan, 3 metres of flexible duct, ceiling inlet grille and spigot, soffit/ wall outlet grille.
Please call 0344 856 0590 for further availability information.

Accessories

Image of Air Replacement Grille Set (Ivory)
Air Replacement Grille Set (Ivory)
Suitable for fitting to doors and panels to allow better internal air circulation and replacement. Consists of a two-piece telescopic set, which fits unobtrusively on either side of the door panel. Minimum fixing thickness 30mm. Plastic. Dimensions: 454 x 90mm.
Please call 0344 856 0590 for further availability information.
Image of Air Replacement Grille Set (Brown)
Air Replacement Grille Set (Brown)
Suitable for fitting to doors and panels to allow better internal air circulation and replacement. Consists of a two-piece telescopic set, which fits unobtrusively on either side of the door panel. Minimum fixing thickness 30mm. Plastic. Dimensions: 454 x 90mm.
Please call 0344 856 0590 for further availability information.
Image of Ambient Response Humidity Sensor Lo-Carbon
Ambient Response Humidity Sensor Lo-Carbon
Designed specifically for the Lo-Carbon product range. The latest self programming electronic On/Off wall mounted humidity sensor which reacts to any rapid increase in humidity and temperature by switching a Vent-Axia fan ‘On’ for rapid removal of moisture laden air, in domestic bathrooms and kitchens. Night time RH increment setback feature suppresses nuisance ripping when the humidity level gradually rises as the temperature falls. Features & Benefits: Ambient operating temp range +5°C to +40°C. Changeover relay switch. DEMKO Approved. Dimensions: 87 x 87 x 33mm (H x W x D). Operating range: 30%-90% RH. Pullcord override and neon indicator. Will fit single gang box for surface mounting. Downloads Catalogue Pages
Please call 0344 856 0590 for further availability information.
Image of Ecotronic Humidity Sensor (Sentinel)
Ecotronic Humidity Sensor (Sentinel)
Humidity Control is automatic and can be set to switch between 65 and 90%RH. An integral pullcord provides a manual override function if required. Can be wired for either ON/OFF or Trickle Boost operation. Set Point adjustable. Maximum switching load 1 amp inductive. Pullcord override indicator Ambient operating temperature 0°C to +40°C. Dimensions:87 x 87 x 33mm (H x W x D). Supply voltage 24V DC SELV. Humidity sensors should be sited approx. 100mm below ceiling level and not above cupboards, refer to siting details in fitting and wiring instructions supplied with product.
Please call 0344 856 0590 for further availability information.

Downloads