VA100 SELV

• Indication light • Panel, ceiling, window or wall mounting • Available with electric shutter • Sensors and auto mode controllers save energy by switching the ventilation units on only when needed and when the room is occupied • Adjustable overrun time option available (5-30 minutes) • Meets current Building Regulations Approved Document F • IPX4 rated - IPX7 rated (SELV) • SELV Transformer to BS EN 60 742

Select a product

The World’s first SELV fan providing extra safety and peace of mind in domestic shower and bathrooms. The VA100 SELV12 from Vent-Axia is a 100mm axial extract fan which can be safely installed over or within reach of a bath or shower in bathrooms and WC's. A range of fans with optional shutter, timer and humidity controlled versions to match application requirements precisely. The VA100 SELV12 meets the Building Regulation requirements of 15 l/s for bathrooms and WC's. Designed in a clean white finish and suitable for ambient temperatures up to +40°C the unit is fitted with Standard Thermal Overload Protection (S.T.O.P.). Safety Extra Low Voltage Fan (SELV) Designed for areas where a fan has to be fitted over or within zone 1 in a room containing a fixed bath or shower according to IEE wiring regulations (BS 7671), the VA100 SELV fan can be safely installed within the spray area. The fan is rated IPX7. Control is by mains safety isolating IP44 transformer unit with SELV output, which is sited away from any source of spray and out of reach of a person using a fixed bath or shower. Vent-Axia SELV units have been independently tested in accordance with UK and European Safety Extra Low Voltage (SELV) and product requirements, and have as a result been granted BEAB approval based on CENELEC harmonised standards. Models Panel Model For discharging into ventilation shafts. It can also be used with up to 3 metres of rigid ducting. Performance 75m3/h, FID sound level 31dB(A). Window Model The VA100 window kit is designed to fit VA100 units in windows and fixing surfaces up to 40mm thick. The four spacers supplied are placed on the inside of the glass to give minimum exterior projection. Wall Model The VA100 wall kit is a rigid telescopic wall sleeve for wall thicknesses from 255-360mm thick plus an outside grille set. For thinner walls the sleeves can be cut to fit. * Where a VA100SV12 fan is installed directly in the splash area, we recommend VA100SVL12 or VA100SVX12 with an Ecotronic 12V Humidistat mounted outside the splash area to avoid saturation of the sensor.

Operation  
VA100 SVX via light switch
VA100 SVL via light switch
VA100 SVXT via light switch with timer overrun facility
VA100 SVXH via integral humidity sensor/transformer pullcord override
VA100 SVLH* via integral humidity sensor/transformer pullcord override

PRODUCT SPECIFICATION:

Best Practice Sensors and auto mode controllers save energy by only switching the ventilation units on when needed and when the room is occupied. To meet IEE Regulations timer models should be isolated using a 3 pole isolator. Stock Ref. No. 56 35 18

PERFORMANCE:

Performance

DIMENSIONS:

  A B C D E F G H
mm 146 47 53 98 31 31 74 200
Transformer 1487 86 65  
Weight 0.55 kg              
Image of VA100SVX 12 (Shutter)
VA100SVX 12 (Shutter)
IPX7 rated fan with thermo-electric shutter and indication light, complete with remote wall mounted transformer.
Please call 0344 856 0590 for further availability information.
Image of VA100SVL 12
VA100SVL 12
IPX7 rated fan with indication light, complete with remote wall mounted transformer.
Please call 0344 856 0590 for further availability information.
Image of VA100SVXT 12 (Shutter/Timer)
VA100SVXT 12 (Shutter/Timer)
IPX7 rated fan with thermo-electric shutter and indication light which operates on override only. Complete with remote mounted transformer with integral adjustable overrun timer.
Please call 0344 856 0590 for further availability information.
Image of VA100SVLHP 12 (Humidity/Pullcord)
VA100SVLHP 12 (Humidity/Pullcord)
IPX7 rated fan complete with remote wall mounted transformer. Integral Humidity Sensor with pullcord override. Indication light which operates on manual override only.
Please call 0344 856 0590 for further availability information.
Image of VA100SVXHP 12 (Humidistat/Pullcord)
VA100SVXHP 12 (Humidistat/Pullcord)
IPX7 rated fan with thermo-electric shutter complete with remote wall mounted transformer. Integral Humidity Sensor with pullcord override. Indication light which operates on manual override only.
Please call 0344 856 0590 for further availability information.
Image of VA100SVXHT 12 (Shutter/Humidistat)
VA100SVXHT 12 (Shutter/Humidistat)
IPX7 rated fan with integral humidistat/timer, and thermo-electric shutter. Remote wall-mounted transformer with switch live override. Indication light which operates on manual override only.
Please call 0344 856 0590 for further availability information.
Image of VA100SVXP 12 (Shutter/Pullcord)
VA100SVXP 12 (Shutter/Pullcord)
IPX7 rated fan with thermo-electric shutter and indication light, complete with remote wall mounted transformer. Boost via pullcord.
Please call 0344 856 0590 for further availability information.
Image of 100mm Wall Fitting Kits (White)
100mm Wall Fitting Kits (White)
100mm Wall Fitting Kits (White) For installing into most walls using the telescopic liners supplied.
Please call 0344 856 0590 for further availability information.
Image of 100mm Wall Fitting Kits (Brown)
100mm Wall Fitting Kits (Brown)
100mm Wall Fitting Kits in Brown
Please call 0344 856 0590 for further availability information.
Image of Easy fix 100mm Window Fitting Kit for VA100
Easy fix 100mm Window Fitting Kit for VA100
Window kit available for use in single or sealed double glazing and where sunstrate is up to 40mm thick. A simple to install window kit manufactured from durable ABS and compatable with Centra fans or the Silhouette 100 110mm diameter glazing hole required.
Please call 0344 856 0590 for further availability information.

Overview

The World’s first SELV fan providing extra safety and peace of mind in domestic shower and bathrooms. The VA100 SELV12 from Vent-Axia is a 100mm axial extract fan which can be safely installed over or within reach of a bath or shower in bathrooms and WC's. A range of fans with optional shutter, timer and humidity controlled versions to match application requirements precisely. The VA100 SELV12 meets the Building Regulation requirements of 15 l/s for bathrooms and WC's. Designed in a clean white finish and suitable for ambient temperatures up to +40°C the unit is fitted with Standard Thermal Overload Protection (S.T.O.P.). Safety Extra Low Voltage Fan (SELV) Designed for areas where a fan has to be fitted over or within zone 1 in a room containing a fixed bath or shower according to IEE wiring regulations (BS 7671), the VA100 SELV fan can be safely installed within the spray area. The fan is rated IPX7. Control is by mains safety isolating IP44 transformer unit with SELV output, which is sited away from any source of spray and out of reach of a person using a fixed bath or shower. Vent-Axia SELV units have been independently tested in accordance with UK and European Safety Extra Low Voltage (SELV) and product requirements, and have as a result been granted BEAB approval based on CENELEC harmonised standards. Models Panel Model For discharging into ventilation shafts. It can also be used with up to 3 metres of rigid ducting. Performance 75m3/h, FID sound level 31dB(A). Window Model The VA100 window kit is designed to fit VA100 units in windows and fixing surfaces up to 40mm thick. The four spacers supplied are placed on the inside of the glass to give minimum exterior projection. Wall Model The VA100 wall kit is a rigid telescopic wall sleeve for wall thicknesses from 255-360mm thick plus an outside grille set. For thinner walls the sleeves can be cut to fit. * Where a VA100SV12 fan is installed directly in the splash area, we recommend VA100SVL12 or VA100SVX12 with an Ecotronic 12V Humidistat mounted outside the splash area to avoid saturation of the sensor.

Operation  
VA100 SVX via light switch
VA100 SVL via light switch
VA100 SVXT via light switch with timer overrun facility
VA100 SVXH via integral humidity sensor/transformer pullcord override
VA100 SVLH* via integral humidity sensor/transformer pullcord override

Technical

PRODUCT SPECIFICATION:

Best Practice Sensors and auto mode controllers save energy by only switching the ventilation units on when needed and when the room is occupied. To meet IEE Regulations timer models should be isolated using a 3 pole isolator. Stock Ref. No. 56 35 18

PERFORMANCE:

Performance

DIMENSIONS:

  A B C D E F G H
mm 146 47 53 98 31 31 74 200
Transformer 1487 86 65  
Weight 0.55 kg              

Models

Image of VA100SVX 12 (Shutter)
VA100SVX 12 (Shutter)
IPX7 rated fan with thermo-electric shutter and indication light, complete with remote wall mounted transformer.
Please call 0344 856 0590 for further availability information.
Image of VA100SVL 12
VA100SVL 12
IPX7 rated fan with indication light, complete with remote wall mounted transformer.
Please call 0344 856 0590 for further availability information.
Image of VA100SVXT 12 (Shutter/Timer)
VA100SVXT 12 (Shutter/Timer)
IPX7 rated fan with thermo-electric shutter and indication light which operates on override only. Complete with remote mounted transformer with integral adjustable overrun timer.
Please call 0344 856 0590 for further availability information.
Image of VA100SVLHP 12 (Humidity/Pullcord)
VA100SVLHP 12 (Humidity/Pullcord)
IPX7 rated fan complete with remote wall mounted transformer. Integral Humidity Sensor with pullcord override. Indication light which operates on manual override only.
Please call 0344 856 0590 for further availability information.
Image of VA100SVXHP 12 (Humidistat/Pullcord)
VA100SVXHP 12 (Humidistat/Pullcord)
IPX7 rated fan with thermo-electric shutter complete with remote wall mounted transformer. Integral Humidity Sensor with pullcord override. Indication light which operates on manual override only.
Please call 0344 856 0590 for further availability information.
Image of VA100SVXHT 12 (Shutter/Humidistat)
VA100SVXHT 12 (Shutter/Humidistat)
IPX7 rated fan with integral humidistat/timer, and thermo-electric shutter. Remote wall-mounted transformer with switch live override. Indication light which operates on manual override only.
Please call 0344 856 0590 for further availability information.
Image of VA100SVXP 12 (Shutter/Pullcord)
VA100SVXP 12 (Shutter/Pullcord)
IPX7 rated fan with thermo-electric shutter and indication light, complete with remote wall mounted transformer. Boost via pullcord.
Please call 0344 856 0590 for further availability information.

Accessories

Image of 100mm Wall Fitting Kits (White)
100mm Wall Fitting Kits (White)
100mm Wall Fitting Kits (White) For installing into most walls using the telescopic liners supplied.
Please call 0344 856 0590 for further availability information.
Image of 100mm Wall Fitting Kits (Brown)
100mm Wall Fitting Kits (Brown)
100mm Wall Fitting Kits in Brown
Please call 0344 856 0590 for further availability information.
Image of Easy fix 100mm Window Fitting Kit for VA100
Easy fix 100mm Window Fitting Kit for VA100
Window kit available for use in single or sealed double glazing and where sunstrate is up to 40mm thick. A simple to install window kit manufactured from durable ABS and compatable with Centra fans or the Silhouette 100 110mm diameter glazing hole required.
Please call 0344 856 0590 for further availability information.

Downloads