Universal Roof Vent
Universal Roof Vent

Universal Roof Vents

• Models available for both pitched and flat roof types
• Complies with Building Regulations
• Suitable for most installations
• Corrosion and weather proof
• Compatible with both mechanical and natural ventilation systems
• Three colours available for pitched roof vents

Select a product

Wholehouse ventilation systems require termination to the external atmosphere, often through the roof. To ensure that the ventilation system is able to achieve it’s optimum level of performance, it is important that a suitable roof termination product is installed.

With this in mind, Vent-Axia is pleased to offer a range of Universal Roof Vents; including products suitable for both pitched and flat roof types.

A selection of colours and sizes should ensure that our range offers a product suitable for most residential applications with a pitched or flat roof. Custom colour and textured vents to match your exact needs are also available at an extra charge, please contact our Technical Support team for more details.

Universal Roof Vent suitable for Pitched Roofs

Manufactured in the UK, these products have been specifically developed for use with both natural and mechanical ventilation systems.

All models have been independently tested by the BRE to BS476 Part 3: 2004 and have been awarded an AA classification - the highest possible. Thus they can be installed without restriction on any pitched roof.

All models have low resistances to airflow (see table) and incorporate condensation grooves to prevent any condensate running back down the duct. Universal Roof Vents are designed to resist the ingress of deluge and driving rain.

Universal Roof Vents (pitched roof models) are suitable for roof pitches between 20° and 60°.

The pitched roof vents are available as a ‘tiled’ roof vent to fit alongside most traditional roof tiles, as well as a ‘slate’ version which can be easily cut down to fit alongside all traditional roof slates. Pitched roof vents are available in a variety of colours as detailed in the Specification Table - custom colour and textured vents to match your exact needs are also available at an extra charge. Please contact our Technical Support team for more details.

Universal Roof Vent suitable for Flat Roofs

Capped stacks for use in asphalt and built-up felt roofs. Special low air resistance cowl - the pressure/airflow resistance is <1.0 Pascal at 63l/s. The pipework above the roofline is twin walled and incorporates an integral condensation drain. The stack pipe has an integral collar and separate aluminium flange for use with both felt and asphalt roof finishes.

All Vent-Axia Universal Roof Vents have a free area exceeding those required by building regulations.

Image of Pitched Roof Vent
Pitched Roof Vent

Available in 100-160mm spigots. Black colour.

Please call 0344 856 0590 for further availability information.
Image of Pitched Roof Vent
Pitched Roof Vent

Available in 125mm spigots. Red colour.

Please call 0344 856 0590 for further availability information.
Image of Pitched Roof Vent
Pitched Roof Vent

Range of Universal Roof Vents suitable for Pitched Roofs available in 125mm spigots and comes in Brown colour.

Please call 0344 856 0590 for further availability information.
Image of Pitched Roof Vent
Pitched Roof Vent

Range of Universal Roof Vents suitable for Pitched Roofs available in 125mm spigots and comes in Grey colour.

Please call 0344 856 0590 for further availability information.
Image of Pitched Roof Vent
Pitched Roof Vent

Range of Universal Roof Vents suitable for Pitched Roofs available in 150mm spigots and comes in Red colour.

Please call 0344 856 0590 for further availability information.
Image of Pitched Roof Vent
Pitched Roof Vent

Range of Universal Roof Vents suitable for Pitched Roofs. Available in 150mm spigots and comes in Brown colour.

Please call 0344 856 0590 for further availability information.
Image of Pitched Roof Vent
Pitched Roof Vent

Range of Universal Roof Vents suitable for Pitched Roofs. Available in 150mm spigots and comes in Grey colour.

Please call 0344 856 0590 for further availability information.
Image of Pitched Roof Vent
Pitched Roof Vent

Range of Universal Roof Vents suitable for Pitched Roofs. Suitable for slate tiles,  the vent is available in 125mm spigots and comes in Slate Blue/Black colour.

Please call 0344 856 0590 for further availability information.
Image of Pitched Roof Vent
Pitched Roof Vent

Range of Universal Roof Vents suitable for Pitched Roofs. Suitable for slate tiles,  the vent is available in 150mm spigots and comes in Slate Blue/Black colour.

Please call 0344 856 0590 for further availability information.
Image of Flat Roof Vent
Flat Roof Vent

Range of Universal Roof Vents suitable for Flat Roofs and available in Black colour with 8,400 mmfree area. 

Please call 0344 856 0590 for further availability information.
Image of Flat Roof Vent
Flat Roof Vent

Range of Universal Roof Vents suitable for Flat Roofs and available in Black colour with 12,000 mmfree area. 

Please call 0344 856 0590 for further availability information.
Image of Flat Roof Vent
Flat Roof Vent

Range of Universal Roof Vents suitable for Flat Roofs and available in Black colour with 20,000 mmfree area. 

Please call 0344 856 0590 for further availability information.

 

Raadpleeg de tab Downloads voor technische informatie

 

 

ESTIMATED RUNNING COSTS

Calculate estimated running costs for this product using the tool below.
For average costs, leave the default values in place or enter your own figures in the boxes to recalculate.
Where a product has multi speeds, a typical installation has been used for the below calculations.


pence
(Your current electricity cost in pence per hour. This will be listed on your electric bill)
hours
(The average number of hours per day fan to run in Trickle mode)
hours
(The average number of hours per day fan to run in Boost mode)

Based on the inputted figures, estimated running costs would be:

Overview

Wholehouse ventilation systems require termination to the external atmosphere, often through the roof. To ensure that the ventilation system is able to achieve it’s optimum level of performance, it is important that a suitable roof termination product is installed.

With this in mind, Vent-Axia is pleased to offer a range of Universal Roof Vents; including products suitable for both pitched and flat roof types.

A selection of colours and sizes should ensure that our range offers a product suitable for most residential applications with a pitched or flat roof. Custom colour and textured vents to match your exact needs are also available at an extra charge, please contact our Technical Support team for more details.

Universal Roof Vent suitable for Pitched Roofs

Manufactured in the UK, these products have been specifically developed for use with both natural and mechanical ventilation systems.

All models have been independently tested by the BRE to BS476 Part 3: 2004 and have been awarded an AA classification - the highest possible. Thus they can be installed without restriction on any pitched roof.

All models have low resistances to airflow (see table) and incorporate condensation grooves to prevent any condensate running back down the duct. Universal Roof Vents are designed to resist the ingress of deluge and driving rain.

Universal Roof Vents (pitched roof models) are suitable for roof pitches between 20° and 60°.

The pitched roof vents are available as a ‘tiled’ roof vent to fit alongside most traditional roof tiles, as well as a ‘slate’ version which can be easily cut down to fit alongside all traditional roof slates. Pitched roof vents are available in a variety of colours as detailed in the Specification Table - custom colour and textured vents to match your exact needs are also available at an extra charge. Please contact our Technical Support team for more details.

Universal Roof Vent suitable for Flat Roofs

Capped stacks for use in asphalt and built-up felt roofs. Special low air resistance cowl - the pressure/airflow resistance is <1.0 Pascal at 63l/s. The pipework above the roofline is twin walled and incorporates an integral condensation drain. The stack pipe has an integral collar and separate aluminium flange for use with both felt and asphalt roof finishes.

All Vent-Axia Universal Roof Vents have a free area exceeding those required by building regulations.

Technical

Models

Image of Pitched Roof Vent
Pitched Roof Vent

Available in 100-160mm spigots. Black colour.

Please call 0344 856 0590 for further availability information.
Image of Pitched Roof Vent
Pitched Roof Vent

Available in 125mm spigots. Red colour.

Please call 0344 856 0590 for further availability information.
Image of Pitched Roof Vent
Pitched Roof Vent

Range of Universal Roof Vents suitable for Pitched Roofs available in 125mm spigots and comes in Brown colour.

Please call 0344 856 0590 for further availability information.
Image of Pitched Roof Vent
Pitched Roof Vent

Range of Universal Roof Vents suitable for Pitched Roofs available in 125mm spigots and comes in Grey colour.

Please call 0344 856 0590 for further availability information.
Image of Pitched Roof Vent
Pitched Roof Vent

Range of Universal Roof Vents suitable for Pitched Roofs available in 150mm spigots and comes in Red colour.

Please call 0344 856 0590 for further availability information.
Image of Pitched Roof Vent
Pitched Roof Vent

Range of Universal Roof Vents suitable for Pitched Roofs. Available in 150mm spigots and comes in Brown colour.

Please call 0344 856 0590 for further availability information.
Image of Pitched Roof Vent
Pitched Roof Vent

Range of Universal Roof Vents suitable for Pitched Roofs. Available in 150mm spigots and comes in Grey colour.

Please call 0344 856 0590 for further availability information.
Image of Pitched Roof Vent
Pitched Roof Vent

Range of Universal Roof Vents suitable for Pitched Roofs. Suitable for slate tiles,  the vent is available in 125mm spigots and comes in Slate Blue/Black colour.

Please call 0344 856 0590 for further availability information.
Image of Pitched Roof Vent
Pitched Roof Vent

Range of Universal Roof Vents suitable for Pitched Roofs. Suitable for slate tiles,  the vent is available in 150mm spigots and comes in Slate Blue/Black colour.

Please call 0344 856 0590 for further availability information.
Image of Flat Roof Vent
Flat Roof Vent

Range of Universal Roof Vents suitable for Flat Roofs and available in Black colour with 8,400 mmfree area. 

Please call 0344 856 0590 for further availability information.
Image of Flat Roof Vent
Flat Roof Vent

Range of Universal Roof Vents suitable for Flat Roofs and available in Black colour with 12,000 mmfree area. 

Please call 0344 856 0590 for further availability information.
Image of Flat Roof Vent
Flat Roof Vent

Range of Universal Roof Vents suitable for Flat Roofs and available in Black colour with 20,000 mmfree area. 

Please call 0344 856 0590 for further availability information.

Downloads