Uniflexplus+

  • Compact, low profile system
  • Highly flexible and robust
  • Extremely crush resistant
  • Quick and easy to install
  • PCDB listed
  • Suitable for installation in concrete
  • Corrosion resistant
  • Smooth inner surface with antistatic and antibacterial coating
  • Independently tested and accredited for air tightness
  • Class D air tightness
  • Operating temp: -20°C to +60°C
  • A spigot blanking cap is provided for use with single runs of semi-rigid

 

Select a product

The Uniflexplus+ Semi-Rigid Range sets the standard for easy to install, low profile ducting solutions. The system gives all of the flexibility that semi-rigid ducting provides - without taking up vital space. With minimal components, the system is uncomplicated to ensure a hassle-free, speedy install. The Uniflexplus+ Semi-Rigid Range is compatible with most wholehouse ventilation systems including the Lo-Carbon Sentinel Kinetic Range (MVHR).

Image of Distribution Box 12xØ75 - Ø125mm
Distribution Box 12xØ75 - Ø125mm

The low-profile distribution box runs a central spigot of diameter 125mm into a set of either 8 or 12 sub-spigots, depending on requirements. Available with either 75mm or 90mm semi-rigid spigots.

Please call 0344 856 0590 for further availability information.
Image of Distribution Box 8xØ75 - Ø125mm
Distribution Box 8xØ75 - Ø125mm

The low-profile distribution box runs a central spigot of diameter 125mm into a set of either 8 or 12 sub-spigots, depending on requirements. Available with either 75mm or 90mm semi-rigid spigots.

Please call 0344 856 0590 for further availability information.
Image of Distribution Box 12xØ90 - Ø125mm
Distribution Box 12xØ90 - Ø125mm

The low-profile distribution box runs a central spigot of diameter 125mm into a set of either 8 or 12 sub-spigots, depending on requirements. Available with either 75mm or 90mm semi-rigid spigots.

Please call 0344 856 0590 for further availability information.
Image of Distribution Box 8xØ90 - Ø125mm
Distribution Box 8xØ90 - Ø125mm

The low-profile distribution box runs a central spigot of diameter 125mm into a set of either 8 or 12 sub-spigots, depending on requirements. Available with either 75mm or 90mm semi-rigid spigots.

Please call 0344 856 0590 for further availability information.
Image of Semi-Rigid Ducting 75mmØ x 50m
Semi-Rigid Ducting 75mmØ x 50m

Suitable for installation in concrete ceilings, suspended ceilings, internal walls, risers or frames, the Semi-Rigid Ducting is double-walled providing optimum flexibility. With an antistatic and antibacterial coating, the internal surface of the Semi-Rigid Ducting is smooth to ensure minimal resistance to airflow. Normally flammable construction material class E, according to EN-13501-1.

Please call 0344 856 0590 for further availability information.
Image of Semi-Rigid Ducting 90mmØ x 50m
Semi-Rigid Ducting 90mmØ x 50m

Suitable for installation in concrete ceilings, suspended ceilings, internal walls, risers or frames, the Semi-Rigid Ducting is double-walled providing optimum flexibility. With an antistatic and antibacterial coating, the internal surface of the Semi-Rigid Ducting is smooth to ensure minimal resistance to airflow. Normally flammable construction material class E, according to EN-13501-1.

Please call 0344 856 0590 for further availability information.
Image of Semi-Rigid Ducting 75mmØ x 25m
Semi-Rigid Ducting 75mmØ x 25m

Suitable for installation in concrete ceilings, suspended ceilings, internal walls, risers or frames, the Semi-Rigid Ducting is double-walled providing optimum flexibility. With an antistatic and antibacterial coating, the internal surface of the Semi-Rigid Ducting is smooth to ensure minimal resistance to airflow. Normally flammable construction material class E, according to EN-13501-1.

Please call 0344 856 0590 for further availability information.
Image of Semi-Rigid Ducting 90mmØ x 25m
Semi-Rigid Ducting 90mmØ x 25m

Suitable for installation in concrete ceilings, suspended ceilings, internal walls, risers or frames, the Semi-Rigid Ducting is double-walled providing optimum flexibility. With an antistatic and antibacterial coating, the internal surface of the Semi-Rigid Ducting is smooth to ensure minimal resistance to airflow. Normally flammable construction material class E, according to EN-13501-1.

Please call 0344 856 0590 for further availability information.
Image of 90° Valve Collector (2xø75 - ø125mm)
90° Valve Collector (2xø75 - ø125mm)

The 90° Valve Collector connects a section of 125mm diameter ducting and turns 90° into 2 spigots to connect to the semi rigid - ideal for dropping semi-rigid into ceiling diffusers.

Please call 0344 856 0590 for further availability information.
Image of 90° Valve Collector (2xø90-ø125mm)
90° Valve Collector (2xø90-ø125mm)
Please call 0344 856 0590 for further availability information.
Image of Straight Valve Adaptor 2xØ90mm - Ø125mm
Straight Valve Adaptor 2xØ90mm - Ø125mm

The straight valve collector takes 125mm ducting and turns it straight into 2 spigots to connect to semi-rigid.

Please call 0344 856 0590 for further availability information.
Image of Straight Valve Collector 2xØ75mm - Ø125mm
Straight Valve Collector 2xØ75mm - Ø125mm

The straight valve collector takes 125mm ducting and turns it straight into 2 spigots to connect to semi-rigid.

Please call 0344 856 0590 for further availability information.

PDF DOWNLOADS:

 

Raadpleeg de tab Downloads voor technische informatie

 

 

ESTIMATED RUNNING COSTS

Calculate estimated running costs for this product using the tool below.
For average costs, leave the default values in place or enter your own figures in the boxes to recalculate.


pence
(Your current electricity cost in pence per hour. This will be listed on your electric bill)
hours
(The average number of hours per day fan to run in Trickle mode)
hours
(The average number of hours per day fan to run in Boost mode)

Based on the inputted figures, estimated running costs would be:

Overview

The Uniflexplus+ Semi-Rigid Range sets the standard for easy to install, low profile ducting solutions. The system gives all of the flexibility that semi-rigid ducting provides - without taking up vital space. With minimal components, the system is uncomplicated to ensure a hassle-free, speedy install. The Uniflexplus+ Semi-Rigid Range is compatible with most wholehouse ventilation systems including the Lo-Carbon Sentinel Kinetic Range (MVHR).

Technical

Models

Image of Distribution Box 12xØ75 - Ø125mm
Distribution Box 12xØ75 - Ø125mm

The low-profile distribution box runs a central spigot of diameter 125mm into a set of either 8 or 12 sub-spigots, depending on requirements. Available with either 75mm or 90mm semi-rigid spigots.

Please call 0344 856 0590 for further availability information.
Image of Distribution Box 8xØ75 - Ø125mm
Distribution Box 8xØ75 - Ø125mm

The low-profile distribution box runs a central spigot of diameter 125mm into a set of either 8 or 12 sub-spigots, depending on requirements. Available with either 75mm or 90mm semi-rigid spigots.

Please call 0344 856 0590 for further availability information.
Image of Distribution Box 12xØ90 - Ø125mm
Distribution Box 12xØ90 - Ø125mm

The low-profile distribution box runs a central spigot of diameter 125mm into a set of either 8 or 12 sub-spigots, depending on requirements. Available with either 75mm or 90mm semi-rigid spigots.

Please call 0344 856 0590 for further availability information.
Image of Distribution Box 8xØ90 - Ø125mm
Distribution Box 8xØ90 - Ø125mm

The low-profile distribution box runs a central spigot of diameter 125mm into a set of either 8 or 12 sub-spigots, depending on requirements. Available with either 75mm or 90mm semi-rigid spigots.

Please call 0344 856 0590 for further availability information.
Image of Semi-Rigid Ducting 75mmØ x 50m
Semi-Rigid Ducting 75mmØ x 50m

Suitable for installation in concrete ceilings, suspended ceilings, internal walls, risers or frames, the Semi-Rigid Ducting is double-walled providing optimum flexibility. With an antistatic and antibacterial coating, the internal surface of the Semi-Rigid Ducting is smooth to ensure minimal resistance to airflow. Normally flammable construction material class E, according to EN-13501-1.

Please call 0344 856 0590 for further availability information.
Image of Semi-Rigid Ducting 90mmØ x 50m
Semi-Rigid Ducting 90mmØ x 50m

Suitable for installation in concrete ceilings, suspended ceilings, internal walls, risers or frames, the Semi-Rigid Ducting is double-walled providing optimum flexibility. With an antistatic and antibacterial coating, the internal surface of the Semi-Rigid Ducting is smooth to ensure minimal resistance to airflow. Normally flammable construction material class E, according to EN-13501-1.

Please call 0344 856 0590 for further availability information.
Image of Semi-Rigid Ducting 75mmØ x 25m
Semi-Rigid Ducting 75mmØ x 25m

Suitable for installation in concrete ceilings, suspended ceilings, internal walls, risers or frames, the Semi-Rigid Ducting is double-walled providing optimum flexibility. With an antistatic and antibacterial coating, the internal surface of the Semi-Rigid Ducting is smooth to ensure minimal resistance to airflow. Normally flammable construction material class E, according to EN-13501-1.

Please call 0344 856 0590 for further availability information.
Image of Semi-Rigid Ducting 90mmØ x 25m
Semi-Rigid Ducting 90mmØ x 25m

Suitable for installation in concrete ceilings, suspended ceilings, internal walls, risers or frames, the Semi-Rigid Ducting is double-walled providing optimum flexibility. With an antistatic and antibacterial coating, the internal surface of the Semi-Rigid Ducting is smooth to ensure minimal resistance to airflow. Normally flammable construction material class E, according to EN-13501-1.

Please call 0344 856 0590 for further availability information.
Image of 90° Valve Collector (2xø75 - ø125mm)
90° Valve Collector (2xø75 - ø125mm)

The 90° Valve Collector connects a section of 125mm diameter ducting and turns 90° into 2 spigots to connect to the semi rigid - ideal for dropping semi-rigid into ceiling diffusers.

Please call 0344 856 0590 for further availability information.
Image of 90° Valve Collector (2xø90-ø125mm)
90° Valve Collector (2xø90-ø125mm)
Please call 0344 856 0590 for further availability information.
Image of Straight Valve Adaptor 2xØ90mm - Ø125mm
Straight Valve Adaptor 2xØ90mm - Ø125mm

The straight valve collector takes 125mm ducting and turns it straight into 2 spigots to connect to semi-rigid.

Please call 0344 856 0590 for further availability information.
Image of Straight Valve Collector 2xØ75mm - Ø125mm
Straight Valve Collector 2xØ75mm - Ø125mm

The straight valve collector takes 125mm ducting and turns it straight into 2 spigots to connect to semi-rigid.

Please call 0344 856 0590 for further availability information.

Downloads