Traditional Standard Range - Wall Fan

• Extract/intake models in 4 sizes: 6", 7", 9" and 12"
• IPX4 Rated
• White fascia, wall sleeve and black external weather louvre
• Optional shutter available
• Manufactured in weather-resistant polymeric materials
• For the best performance from your fan, use an Ecotronic controller

Select a product

Classic Retro-Styled Ventilation
The proven Standard Range Wall Fans and Fitting Kits are designed to fit flush into most double brick walls using the rigid wall liner supplied. Provision is made within the liner for conduit entry. When installed, onlythe ivory fascia is visible on the internal wall face. The external weather louvre fits flush to the outside. A shutter is available as an accessory which can be easily fitted within the unit.

On new building work the installation and wiring of the wall liner can be completed prior to the final installation of the unit and controller. Fully shrouded connectors on the fascia automatically connect the wiring to the motor when fitted to the wall liner.

PRODUCT SPECIFICATION:

Fan Core Motor
The motor is purpose-designed. Suitable for running at any angle. Quiet running, enclosed, sealed for life ball bearings.
Supply voltage: 220-240V/1/50Hz.
Suitable for operation in ambient temperatures from -40°C to +50°C.
Fitted with Standard Thermal Overload Protection (S.T.O.P.).
Shutter
Type SD/R. This extract/intake shutter fits inside the Vent-Axia unit and closes against unwanted backdraughts. It can be fitted at the same time as the unit or at a later date if required. Airflow operated for extract use, cord operated lock for intake use.

Controller
The Ecotronic controller is recommended for use with this model to give full function control of the fan including auto mode using an electromechanical sensor from Vent-Axia’s sensor range. Alternatively, single speed extract is achieved using a normal On/Off switch.
 

DIMENSIONS:

 

 

 

Click here for technical information, within our Online Product Selector. After, select your required fan model from the list to display Performance, Sound, Dimensions and Electrical Data

Image of Standard Range Wall Model S6WL
Standard Range Wall Model S6WL
Classic Retro-Styled Ventilation
Please call 0344 856 0590 for further availability information.
Image of Standard Range Wall Model S7WL
Standard Range Wall Model S7WL
Classic Retro-Styled Ventilation
Please call 0344 856 0590 for further availability information.
Image of Standard Range Wall Model S9WL
Standard Range Wall Model S9WL
Classic Retro-Styled Ventilation
Please call 0344 856 0590 for further availability information.
Image of Standard Range Wall Model S12WL
Standard Range Wall Model S12WL
Classic Retro-Styled Ventilation
Please call 0344 856 0590 for further availability information.
Image of Ecotronic Controller
Ecotronic Controller
For groups of units of any one size up to a total of 400 watts. Do not mix T-Series with Standard Range ventilating units on one controller.
Please call 0344 856 0590 for further availability information.
Image of Ambient Response Humidity Sensor Lo-Carbon
Ambient Response Humidity Sensor Lo-Carbon
Designed specifically for the Lo-Carbon product range. The latest self programming electronic On/Off wall mounted humidity sensor which reacts to any rapid increase in humidity and temperature by switching a Vent-Axia fan ‘On’ for rapid removal of moisture laden air, in domestic bathrooms and kitchens. Night time RH increment setback feature suppresses nuisance ripping when the humidity level gradually rises as the temperature falls. Features & Benefits: Ambient operating temp range +5°C to +40°C. Changeover relay switch. DEMKO Approved. Dimensions: 87 x 87 x 33mm (H x W x D). Operating range: 30%-90% RH. Pullcord override and neon indicator. Will fit single gang box for surface mounting. Downloads Catalogue Pages
Please call 0344 856 0590 for further availability information.
Image of Air Quality Sensor (Sentinel)
Air Quality Sensor (Sentinel)
Automatically reacts to the deterioration of air quality, sensing tobacco smoke, smells and toilet odours to regulate mechanically ventilated areas, such as cinemas, pubs, clubs, restaurants, kitchens, toilets and conference rooms. The sensor switches when the air quality declines below an adjustable preset level. This is registered by a self-cleaning ceramic sensing head. The air quality sensor should not be used for the detection of combustible gases. Ambient operating temperature range 0°C to +50°C. MIN - MAX mode or direct Damper control. Dimensions:87 x 157 x 47mm (H xWxD) Surface mounted. 1 - 25 min O/R timer. Supply voltage 24V DC SELV.
Please call 0344 856 0590 for further availability information.
Image of Ecotronic Humidity Sensor (Sentinel)
Ecotronic Humidity Sensor (Sentinel)
Humidity Control is automatic and can be set to switch between 65 and 90%RH. An integral pullcord provides a manual override function if required. Can be wired for either ON/OFF or Trickle Boost operation. Set Point adjustable. Maximum switching load 1 amp inductive. Pullcord override indicator Ambient operating temperature 0°C to +40°C. Dimensions:87 x 87 x 33mm (H x W x D). Supply voltage 24V DC SELV. Humidity sensors should be sited approx. 100mm below ceiling level and not above cupboards, refer to siting details in fitting and wiring instructions supplied with product.
Please call 0344 856 0590 for further availability information.

 

Raadpleeg de tab Downloads voor technische informatie

 

 

ESTIMATED RUNNING COSTS

Calculate estimated running costs for this product using the tool below.
For average costs, leave the default values in place or enter your own figures in the boxes to recalculate.
Where a product has multi speeds, a typical installation has been used for the below calculations.


pence
(Your current electricity cost in pence per hour. This will be listed on your electric bill)
hours
(The average number of hours per day fan to run in Trickle mode)
hours
(The average number of hours per day fan to run in Boost mode)

Based on the inputted figures, estimated running costs would be:

Overview

Classic Retro-Styled Ventilation
The proven Standard Range Wall Fans and Fitting Kits are designed to fit flush into most double brick walls using the rigid wall liner supplied. Provision is made within the liner for conduit entry. When installed, onlythe ivory fascia is visible on the internal wall face. The external weather louvre fits flush to the outside. A shutter is available as an accessory which can be easily fitted within the unit.

On new building work the installation and wiring of the wall liner can be completed prior to the final installation of the unit and controller. Fully shrouded connectors on the fascia automatically connect the wiring to the motor when fitted to the wall liner.

Technical

PRODUCT SPECIFICATION:

Fan Core Motor
The motor is purpose-designed. Suitable for running at any angle. Quiet running, enclosed, sealed for life ball bearings.
Supply voltage: 220-240V/1/50Hz.
Suitable for operation in ambient temperatures from -40°C to +50°C.
Fitted with Standard Thermal Overload Protection (S.T.O.P.).
Shutter
Type SD/R. This extract/intake shutter fits inside the Vent-Axia unit and closes against unwanted backdraughts. It can be fitted at the same time as the unit or at a later date if required. Airflow operated for extract use, cord operated lock for intake use.

Controller
The Ecotronic controller is recommended for use with this model to give full function control of the fan including auto mode using an electromechanical sensor from Vent-Axia’s sensor range. Alternatively, single speed extract is achieved using a normal On/Off switch.
 

DIMENSIONS:

 

 

 

Click here for technical information, within our Online Product Selector. After, select your required fan model from the list to display Performance, Sound, Dimensions and Electrical Data

Models

Image of Standard Range Wall Model S6WL
Standard Range Wall Model S6WL
Classic Retro-Styled Ventilation
Please call 0344 856 0590 for further availability information.
Image of Standard Range Wall Model S7WL
Standard Range Wall Model S7WL
Classic Retro-Styled Ventilation
Please call 0344 856 0590 for further availability information.
Image of Standard Range Wall Model S9WL
Standard Range Wall Model S9WL
Classic Retro-Styled Ventilation
Please call 0344 856 0590 for further availability information.
Image of Standard Range Wall Model S12WL
Standard Range Wall Model S12WL
Classic Retro-Styled Ventilation
Please call 0344 856 0590 for further availability information.

Accessories

Image of Ecotronic Controller
Ecotronic Controller
For groups of units of any one size up to a total of 400 watts. Do not mix T-Series with Standard Range ventilating units on one controller.
Please call 0344 856 0590 for further availability information.
Image of Ambient Response Humidity Sensor Lo-Carbon
Ambient Response Humidity Sensor Lo-Carbon
Designed specifically for the Lo-Carbon product range. The latest self programming electronic On/Off wall mounted humidity sensor which reacts to any rapid increase in humidity and temperature by switching a Vent-Axia fan ‘On’ for rapid removal of moisture laden air, in domestic bathrooms and kitchens. Night time RH increment setback feature suppresses nuisance ripping when the humidity level gradually rises as the temperature falls. Features & Benefits: Ambient operating temp range +5°C to +40°C. Changeover relay switch. DEMKO Approved. Dimensions: 87 x 87 x 33mm (H x W x D). Operating range: 30%-90% RH. Pullcord override and neon indicator. Will fit single gang box for surface mounting. Downloads Catalogue Pages
Please call 0344 856 0590 for further availability information.
Image of Air Quality Sensor (Sentinel)
Air Quality Sensor (Sentinel)
Automatically reacts to the deterioration of air quality, sensing tobacco smoke, smells and toilet odours to regulate mechanically ventilated areas, such as cinemas, pubs, clubs, restaurants, kitchens, toilets and conference rooms. The sensor switches when the air quality declines below an adjustable preset level. This is registered by a self-cleaning ceramic sensing head. The air quality sensor should not be used for the detection of combustible gases. Ambient operating temperature range 0°C to +50°C. MIN - MAX mode or direct Damper control. Dimensions:87 x 157 x 47mm (H xWxD) Surface mounted. 1 - 25 min O/R timer. Supply voltage 24V DC SELV.
Please call 0344 856 0590 for further availability information.
Image of Ecotronic Humidity Sensor (Sentinel)
Ecotronic Humidity Sensor (Sentinel)
Humidity Control is automatic and can be set to switch between 65 and 90%RH. An integral pullcord provides a manual override function if required. Can be wired for either ON/OFF or Trickle Boost operation. Set Point adjustable. Maximum switching load 1 amp inductive. Pullcord override indicator Ambient operating temperature 0°C to +40°C. Dimensions:87 x 87 x 33mm (H x W x D). Supply voltage 24V DC SELV. Humidity sensors should be sited approx. 100mm below ceiling level and not above cupboards, refer to siting details in fitting and wiring instructions supplied with product.
Please call 0344 856 0590 for further availability information.

Downloads