Traditional Standard Range - Panel Models

• Extract / intake model in 4 sizes: 6", 7", 9" and 12"
• IPX4 Rated
• Built-in shutter available
• Colour: White Fascia
• Pre-wired lead for easy installation
• Manufactured in weather-resistant polymeric materials
• For the best performance from your fan, use a Ecotronic controller

Select a product

Classic Retro-Styled Ventilation

A versatile range of extract/intake fans designed to satisfy the most demanding requirements of efficient ventilation. Available in four sizes, the Standard Range Panel Fan is supplied without a shutter for vertical installations. The shutter is available as an accessory which can be easily fitted within the unit.

Suitable for mounting at any angle, this range may be installed in internal partitions, ceilings, ducts, and (with external louvres) through external walls.

The outer spigot may be connected directly to flexible ducting and other Vent-Axia ventilation accessories to suit individual applications. When installed, only the white fascia is visible.

PRODUCT SPECIFICATION:

Shutter
Type SD/R. This vertical extract/intake shutter fits inside the Vent-Axia unit and closes against unwanted backdraughts. It can be fitted at the same time as the unit or at a later date if required. Airflow operated for extract use, cord operated for intake use. For all models mounted in vertical surfaces.
Motor
Purpose-designed enclosed ball bearing motor. Suitable for running at any angle. Quiet running.
Supply voltage 220-240V/1/50 Hz.
Suitable for operation in ambient temperatures from -40°C to +40°C.
Fitted with Standard Thermal Overload Protection. (S.T.O.P.)

Controller
The Ecotronic Controller is recommended for use with this model to provide full function control of the fan plus the option of sensor mode using a selection of electromechanical switches to provide automatic switching of the fan. Alternatively, single speed extract is achieved using a normal On/Off switch.

 

DIMENSIONS:

Click here for technical information, within our Online Product Selector. After, select your required fan model from the list to display Performance, Sound, Dimensions and Electrical Data.

Image of Standard Range Panel Model S6PL
Standard Range Panel Model S6PL
Classic Retro-Styled Ventilation A versatile range of extract/intake ventilating units designed to satisfy the most demanding requirements of efficient ventilation. Available in four sizes, the Standard Range units can be supplied without a shutter for vertical installations. The shutter is available as an accessory which can be easily fitted within the unit,
Please call 0344 856 0590 for further availability information.
Image of Standard Range Panel Model S7PL
Standard Range Panel Model S7PL
Classic Retro-Styled Ventilation A versatile range of extract/intake ventilating units designed to satisfy the most demanding requirements of efficient ventilation. Available in four sizes, the Standard Range units can be supplied without a shutter for vertical installations. The shutter is available as an accessory which can be easily fitted within the unit,
Please call 0344 856 0590 for further availability information.
Image of Standard Range Panel Model S9PL
Standard Range Panel Model S9PL
Classic Retro-Styled Ventilation A versatile range of extract/intake ventilating units designed to satisfy the most demanding requirements of efficient ventilation. Available in four sizes, the Standard Range units can be supplied without a shutter for vertical installations. The shutter is available as an accessory which can be easily fitted within the unit.
Please call 0344 856 0590 for further availability information.
Image of Standard Range Panel Model S12PL
Standard Range Panel Model S12PL
Classic Retro-Styled Ventilation A versatile range of extract/intake ventilating units designed to satisfy the most demanding requirements of efficient ventilation. Available in four sizes, the Standard Range units can be supplied without a shutter for vertical installations. The shutter is available as an accessory which can be easily fitted within the unit,
Please call 0344 856 0590 for further availability information.
Image of Ecotronic Controller
Ecotronic Controller
For groups of units of any one size up to a total of 400 watts. Do not mix T-Series with Standard Range ventilating units on one controller.
Please call 0344 856 0590 for further availability information.
Image of Ambient Response Humidity Sensor Lo-Carbon
Ambient Response Humidity Sensor Lo-Carbon
Designed specifically for the Lo-Carbon product range. The latest self programming electronic On/Off wall mounted humidity sensor which reacts to any rapid increase in humidity and temperature by switching a Vent-Axia fan ‘On’ for rapid removal of moisture laden air, in domestic bathrooms and kitchens. Night time RH increment setback feature suppresses nuisance ripping when the humidity level gradually rises as the temperature falls. Features & Benefits: Ambient operating temp range +5°C to +40°C. Changeover relay switch. DEMKO Approved. Dimensions: 87 x 87 x 33mm (H x W x D). Operating range: 30%-90% RH. Pullcord override and neon indicator. Will fit single gang box for surface mounting. Downloads Catalogue Pages
Please call 0344 856 0590 for further availability information.
Image of Air Quality Sensor (Sentinel)
Air Quality Sensor (Sentinel)
Automatically reacts to the deterioration of air quality, sensing tobacco smoke, smells and toilet odours to regulate mechanically ventilated areas, such as cinemas, pubs, clubs, restaurants, kitchens, toilets and conference rooms. The sensor switches when the air quality declines below an adjustable preset level. This is registered by a self-cleaning ceramic sensing head. The air quality sensor should not be used for the detection of combustible gases. Ambient operating temperature range 0°C to +50°C. MIN - MAX mode or direct Damper control. Dimensions:87 x 157 x 47mm (H xWxD) Surface mounted. 1 - 25 min O/R timer. Supply voltage 24V DC SELV.
Please call 0344 856 0590 for further availability information.
Image of Ecotronic Humidity Sensor (Sentinel)
Ecotronic Humidity Sensor (Sentinel)
Humidity Control is automatic and can be set to switch between 65 and 90%RH. An integral pullcord provides a manual override function if required. Can be wired for either ON/OFF or Trickle Boost operation. Set Point adjustable. Maximum switching load 1 amp inductive. Pullcord override indicator Ambient operating temperature 0°C to +40°C. Dimensions:87 x 87 x 33mm (H x W x D). Supply voltage 24V DC SELV. Humidity sensors should be sited approx. 100mm below ceiling level and not above cupboards, refer to siting details in fitting and wiring instructions supplied with product.
Please call 0344 856 0590 for further availability information.

 

Raadpleeg de tab Downloads voor technische informatie

 

 

ESTIMATED RUNNING COSTS

Calculate estimated running costs for this product using the tool below.
For average costs, leave the default values in place or enter your own figures in the boxes to recalculate.
Where a product has multi speeds, a typical installation has been used for the below calculations.


pence
(Your current electricity cost in pence per hour. This will be listed on your electric bill)
hours
(The average number of hours per day fan to run in Trickle mode)
hours
(The average number of hours per day fan to run in Boost mode)

Based on the inputted figures, estimated running costs would be:

Overview

Classic Retro-Styled Ventilation

A versatile range of extract/intake fans designed to satisfy the most demanding requirements of efficient ventilation. Available in four sizes, the Standard Range Panel Fan is supplied without a shutter for vertical installations. The shutter is available as an accessory which can be easily fitted within the unit.

Suitable for mounting at any angle, this range may be installed in internal partitions, ceilings, ducts, and (with external louvres) through external walls.

The outer spigot may be connected directly to flexible ducting and other Vent-Axia ventilation accessories to suit individual applications. When installed, only the white fascia is visible.

Technical

PRODUCT SPECIFICATION:

Shutter
Type SD/R. This vertical extract/intake shutter fits inside the Vent-Axia unit and closes against unwanted backdraughts. It can be fitted at the same time as the unit or at a later date if required. Airflow operated for extract use, cord operated for intake use. For all models mounted in vertical surfaces.
Motor
Purpose-designed enclosed ball bearing motor. Suitable for running at any angle. Quiet running.
Supply voltage 220-240V/1/50 Hz.
Suitable for operation in ambient temperatures from -40°C to +40°C.
Fitted with Standard Thermal Overload Protection. (S.T.O.P.)

Controller
The Ecotronic Controller is recommended for use with this model to provide full function control of the fan plus the option of sensor mode using a selection of electromechanical switches to provide automatic switching of the fan. Alternatively, single speed extract is achieved using a normal On/Off switch.

 

DIMENSIONS:

Click here for technical information, within our Online Product Selector. After, select your required fan model from the list to display Performance, Sound, Dimensions and Electrical Data.

Models

Image of Standard Range Panel Model S6PL
Standard Range Panel Model S6PL
Classic Retro-Styled Ventilation A versatile range of extract/intake ventilating units designed to satisfy the most demanding requirements of efficient ventilation. Available in four sizes, the Standard Range units can be supplied without a shutter for vertical installations. The shutter is available as an accessory which can be easily fitted within the unit,
Please call 0344 856 0590 for further availability information.
Image of Standard Range Panel Model S7PL
Standard Range Panel Model S7PL
Classic Retro-Styled Ventilation A versatile range of extract/intake ventilating units designed to satisfy the most demanding requirements of efficient ventilation. Available in four sizes, the Standard Range units can be supplied without a shutter for vertical installations. The shutter is available as an accessory which can be easily fitted within the unit,
Please call 0344 856 0590 for further availability information.
Image of Standard Range Panel Model S9PL
Standard Range Panel Model S9PL
Classic Retro-Styled Ventilation A versatile range of extract/intake ventilating units designed to satisfy the most demanding requirements of efficient ventilation. Available in four sizes, the Standard Range units can be supplied without a shutter for vertical installations. The shutter is available as an accessory which can be easily fitted within the unit.
Please call 0344 856 0590 for further availability information.
Image of Standard Range Panel Model S12PL
Standard Range Panel Model S12PL
Classic Retro-Styled Ventilation A versatile range of extract/intake ventilating units designed to satisfy the most demanding requirements of efficient ventilation. Available in four sizes, the Standard Range units can be supplied without a shutter for vertical installations. The shutter is available as an accessory which can be easily fitted within the unit,
Please call 0344 856 0590 for further availability information.

Accessories

Image of Ecotronic Controller
Ecotronic Controller
For groups of units of any one size up to a total of 400 watts. Do not mix T-Series with Standard Range ventilating units on one controller.
Please call 0344 856 0590 for further availability information.
Image of Ambient Response Humidity Sensor Lo-Carbon
Ambient Response Humidity Sensor Lo-Carbon
Designed specifically for the Lo-Carbon product range. The latest self programming electronic On/Off wall mounted humidity sensor which reacts to any rapid increase in humidity and temperature by switching a Vent-Axia fan ‘On’ for rapid removal of moisture laden air, in domestic bathrooms and kitchens. Night time RH increment setback feature suppresses nuisance ripping when the humidity level gradually rises as the temperature falls. Features & Benefits: Ambient operating temp range +5°C to +40°C. Changeover relay switch. DEMKO Approved. Dimensions: 87 x 87 x 33mm (H x W x D). Operating range: 30%-90% RH. Pullcord override and neon indicator. Will fit single gang box for surface mounting. Downloads Catalogue Pages
Please call 0344 856 0590 for further availability information.
Image of Air Quality Sensor (Sentinel)
Air Quality Sensor (Sentinel)
Automatically reacts to the deterioration of air quality, sensing tobacco smoke, smells and toilet odours to regulate mechanically ventilated areas, such as cinemas, pubs, clubs, restaurants, kitchens, toilets and conference rooms. The sensor switches when the air quality declines below an adjustable preset level. This is registered by a self-cleaning ceramic sensing head. The air quality sensor should not be used for the detection of combustible gases. Ambient operating temperature range 0°C to +50°C. MIN - MAX mode or direct Damper control. Dimensions:87 x 157 x 47mm (H xWxD) Surface mounted. 1 - 25 min O/R timer. Supply voltage 24V DC SELV.
Please call 0344 856 0590 for further availability information.
Image of Ecotronic Humidity Sensor (Sentinel)
Ecotronic Humidity Sensor (Sentinel)
Humidity Control is automatic and can be set to switch between 65 and 90%RH. An integral pullcord provides a manual override function if required. Can be wired for either ON/OFF or Trickle Boost operation. Set Point adjustable. Maximum switching load 1 amp inductive. Pullcord override indicator Ambient operating temperature 0°C to +40°C. Dimensions:87 x 87 x 33mm (H x W x D). Supply voltage 24V DC SELV. Humidity sensors should be sited approx. 100mm below ceiling level and not above cupboards, refer to siting details in fitting and wiring instructions supplied with product.
Please call 0344 856 0590 for further availability information.

Downloads