Solo Pro/SELV

100mm high performance centrifugal extract fan for internal
bathrooms, toilets and other small rooms
• Extract performance 22l/s
• Single speed and overrun timer models
• Suitable for wall, ceiling, panel and window mounting
• SELV models suitable for installation over or within reach of a
shower or bath
• Suitable for use with flat ducting
• IPX4 rated - IPX7 rated (SELV)
• Transformer complies with BS EN 60742

Select a product

High Performance Ventilation
The new Solo Pro is a new and improved version of our trusted
Solo model. With improved aesthetics, sound and installation it has been specifically designed for effective ducted ventilation of internal bathrooms, toilets and other small rooms. Finished in White, the new Solo Pro range can be used with 100mm diameter smooth bore duct in straight runs equal to 50m, yet still meets the minimum 15l/s required by the current Building Regulations Document F for ventilation of bathrooms. Solo Pro can also be used with flat ducting for shorter concealed runs.

Models are available for surface or recessed mounting directly into standard 100mm diameter ducting. Suitable for panel, wall and ceiling installations and windows up to 25mm thick. For high rise or coastal applications, install through the wall with a Vent Cowl (Stock Ref 561403).

Safety Extra Low Voltage
SELV models are designed for areas where a fan has to be fitted within zone 1 in a room containing a fixed bath or shower according to IEE wiring regulations. The Solo SELV models can be safely installed within the spray area. The SELV models are rated IPX7, control is by a mains safety isolating transformer with 12V AC SELV output, which is sited away from any source of spray and out of reach of a person using a fixed bath or shower.

The safety isolating transformer, to BS EN 60742, is mounted in a purpose made enclosure. The enclosure can be wall mounted or sited in the loft. The enclosure will accept mini trunking.

Electrical
Rear 20mm conduit entry for recessed wiring and side entry grommet for surface wiring. Supply voltage to transformer/controller 220-240V/1/50Hz. Output to fan 12V SELV/ 1/50Hz.

DIMENSIONS:

Dimensions (mm)            
  A B C E F
  154 119 25 100 195 57.5
 
Transformer (W x H x D) 175 90 55 85      
Solo Pro/SELV
Image of Solo Pro SELV SVP (Pullcord)
Solo Pro SELV SVP (Pullcord)
SELV fan with airflow shutter. Mains transformer with 12V SELV output.
Please call 0344 856 0590 for further availability information.
Image of Solo Pro SELV SVT (Timer)
Solo Pro SELV SVT (Timer)
SELV fan with airflow shutter. Mains transformer with 12V SELV output with presettable overrun timer (5-30 minutes).
Please call 0344 856 0590 for further availability information.
Image of Solo Pro SELV SVHTP (Humidity)
Solo Pro SELV SVHTP (Humidity)
SELV fan with airflow shutter. Mains transformer with 12V SELV output with pullcord override included.
Please call 0344 856 0590 for further availability information.
Image of 3 Pole Isolator
3 Pole Isolator

Isolates Live, Neutral and Switched Live for integral timer fans. 6 amp, 3 pole isolator complying to the 3mm contact separation requirement for routine maintenance repair

Please call 0344 856 0590 for further availability information.
Image of Solo Pro P (Pullcord)
Solo Pro P (Pullcord)
Single speed 24l/s. Control by pullcord or from light/remote switch or sensor.
Please call 0344 856 0590 for further availability information.
Image of Solo Pro T (Timer)
Solo Pro T (Timer)
Single speed 24l/s. Control by light/remote switch. Overrun timer variable from 5 to 30 minutes.
Please call 0344 856 0590 for further availability information.
Image of Solo Pro HTP (Humidity and Timer)
Solo Pro HTP (Humidity and Timer)
Humidity controlled single speed fan with pullcord override. 17 min overrun timer.
Please call 0344 856 0590 for further availability information.
Image of Solo Pro TM (Timer/PIR)
Solo Pro TM (Timer/PIR)
Controlled by separate PIR sensor supplied with fan. Built in overrun timer, variable from 5 to 30 minutes, switches fan Off.
Please call 0344 856 0590 for further availability information.
Image of 100mm Wall Fitting Kits (White)
100mm Wall Fitting Kits (White)

100mm Wall Fitting Kits (White) For installing into most walls using the telescopic liners supplied.

Please call 0344 856 0590 for further availability information.
Image of 100mm Wall Fitting Kits (Brown)
100mm Wall Fitting Kits (Brown)
100mm Wall Fitting Kits in Brown
Please call 0344 856 0590 for further availability information.
Window Fitting Kit for Solo
For use in single or sealed double glazing and most materials up to 25mm thick.
Please call 0344 856 0590 for further availability information.

 

Raadpleeg de tab Downloads voor technische informatie

 

 

ESTIMATED RUNNING COSTS

Calculate estimated running costs for this product using the tool below.
For average costs, leave the default values in place or enter your own figures in the boxes to recalculate.
Where a product has multi speeds, a typical installation has been used for the below calculations.


pence
(Your current electricity cost in pence per hour. This will be listed on your electric bill)
hours
(The average number of hours per day fan to run in Trickle mode)
hours
(The average number of hours per day fan to run in Boost mode)

Based on the inputted figures, estimated running costs would be:

Overview

High Performance Ventilation
The new Solo Pro is a new and improved version of our trusted
Solo model. With improved aesthetics, sound and installation it has been specifically designed for effective ducted ventilation of internal bathrooms, toilets and other small rooms. Finished in White, the new Solo Pro range can be used with 100mm diameter smooth bore duct in straight runs equal to 50m, yet still meets the minimum 15l/s required by the current Building Regulations Document F for ventilation of bathrooms. Solo Pro can also be used with flat ducting for shorter concealed runs.

Models are available for surface or recessed mounting directly into standard 100mm diameter ducting. Suitable for panel, wall and ceiling installations and windows up to 25mm thick. For high rise or coastal applications, install through the wall with a Vent Cowl (Stock Ref 561403).

Safety Extra Low Voltage
SELV models are designed for areas where a fan has to be fitted within zone 1 in a room containing a fixed bath or shower according to IEE wiring regulations. The Solo SELV models can be safely installed within the spray area. The SELV models are rated IPX7, control is by a mains safety isolating transformer with 12V AC SELV output, which is sited away from any source of spray and out of reach of a person using a fixed bath or shower.

The safety isolating transformer, to BS EN 60742, is mounted in a purpose made enclosure. The enclosure can be wall mounted or sited in the loft. The enclosure will accept mini trunking.

Electrical
Rear 20mm conduit entry for recessed wiring and side entry grommet for surface wiring. Supply voltage to transformer/controller 220-240V/1/50Hz. Output to fan 12V SELV/ 1/50Hz.

Technical

DIMENSIONS:

Dimensions (mm)            
  A B C E F
  154 119 25 100 195 57.5
 
Transformer (W x H x D) 175 90 55 85      
Solo Pro/SELV

Models

Image of Solo Pro SELV SVP (Pullcord)
Solo Pro SELV SVP (Pullcord)
SELV fan with airflow shutter. Mains transformer with 12V SELV output.
Please call 0344 856 0590 for further availability information.
Image of Solo Pro SELV SVT (Timer)
Solo Pro SELV SVT (Timer)
SELV fan with airflow shutter. Mains transformer with 12V SELV output with presettable overrun timer (5-30 minutes).
Please call 0344 856 0590 for further availability information.
Image of Solo Pro SELV SVHTP (Humidity)
Solo Pro SELV SVHTP (Humidity)
SELV fan with airflow shutter. Mains transformer with 12V SELV output with pullcord override included.
Please call 0344 856 0590 for further availability information.
Image of 3 Pole Isolator
3 Pole Isolator

Isolates Live, Neutral and Switched Live for integral timer fans. 6 amp, 3 pole isolator complying to the 3mm contact separation requirement for routine maintenance repair

Please call 0344 856 0590 for further availability information.
Image of Solo Pro P (Pullcord)
Solo Pro P (Pullcord)
Single speed 24l/s. Control by pullcord or from light/remote switch or sensor.
Please call 0344 856 0590 for further availability information.
Image of Solo Pro T (Timer)
Solo Pro T (Timer)
Single speed 24l/s. Control by light/remote switch. Overrun timer variable from 5 to 30 minutes.
Please call 0344 856 0590 for further availability information.
Image of Solo Pro HTP (Humidity and Timer)
Solo Pro HTP (Humidity and Timer)
Humidity controlled single speed fan with pullcord override. 17 min overrun timer.
Please call 0344 856 0590 for further availability information.
Image of Solo Pro TM (Timer/PIR)
Solo Pro TM (Timer/PIR)
Controlled by separate PIR sensor supplied with fan. Built in overrun timer, variable from 5 to 30 minutes, switches fan Off.
Please call 0344 856 0590 for further availability information.

Accessories

Image of 100mm Wall Fitting Kits (White)
100mm Wall Fitting Kits (White)

100mm Wall Fitting Kits (White) For installing into most walls using the telescopic liners supplied.

Please call 0344 856 0590 for further availability information.
Image of 100mm Wall Fitting Kits (Brown)
100mm Wall Fitting Kits (Brown)
100mm Wall Fitting Kits in Brown
Please call 0344 856 0590 for further availability information.
Window Fitting Kit for Solo
For use in single or sealed double glazing and most materials up to 25mm thick.
Please call 0344 856 0590 for further availability information.

Downloads