Slimpack EC Box Fan - SLP EC
Slimpack EC Box Fan - SLP EC

Slimpak EC Box Fan (SLP EC)

• Ultra slim and compact
• Energy efficient EC/DC motor
• Backward curved impeller 
• Acoustically treated ‘O’ class rated
• Integral commissioning potentiometer
• Optional external speed control input
• Matching ancillaries
• ‘Eco Flow’ computer modelled design

The New range of Slimpak EC single in-line box fans incorporate an energy efficient EC motor and basic commissioning controls to offer an energy efficient basic fan system.

Manufactured from Galvanised sheet the Slimpak (SLP EC) fan units are internally treated with an ‘O’ class rated, BS476 part 6 & 7, acoustic foam, which offers the benefits of high sound absorption and good
thermal insulation properties, in addition to self extinguishing properties and resistance to ignition.

The casing includes an inclined inlet and bellmouth entry which directs the incoming air to the impeller with minimal turbulence. The result is better air management through the unit, less noise, higher efficiency and
an increased performance.

The housing is designed to be as compact as possible for ceiling or plantroom applications with integral mounting points to allow quick and easy installation.

Motor / Impellers
All SLP EC units feature an energy efficient, Class 1, EC/DC external rotor motor and backward curved impeller assembly specifically chosen for performance and non-overloading characteristics. The assembly is dynamically balanced to DIN ISO 1940 Grade 6.3, duct size 500mm rated IP54, all other sizes, IP44 according to BS EN 60529. Ball bearings are greased for life. Insulation is Class ‘B’ (from -25°C to +60°C). All models incorporate internal electronic overload protection and soft start function.

Control
Every SLP EC unit is fitted with a purpose designed integral commissioning controller giving the ability to set the exact duty required at commissioning. Alternatively the integral potentiometer can be bypassed to allow remote speed control via an external 0-10V potentiometer. Low voltage control wiring is kept separate from the mains wiring.

Electrical
Motors are single phase 230V +/- 10% / 50/60Hz / 1ph (size 100-400mm) or 400V +/- 10% / 50/60Hz / 3ph (size 500mm).

Performance/Sound
Extensively tested to BS848 parts 1 & 2. Published dB(A) figures are free field sound pressure levels at 3m with spherical propagation at reference level of 2 x 10-5 Pa. The inlet/outlet sound power level spectra figures are dB with a reference of 10–12 watts.

Quality Assurance
Design and manufacture are in accordance with the standard for quality management systems BS EN ISO 9001:1994.

Accessories
A full range of accessories are available with the Slimpak EC range of fans such as:
• Remote potentiometer speed controller
• Two speed trickle boost controller
• Pre & secondary filter cassettes
• Electric heater batteries
• Backdraught shutters
• In-line attenuators

DIMENSIONS:

Stock ref A B C D E F G H I Kg
SLP100EC 100 380 275 456 310 192 155 108 96 7.5
SLP125EC 125 380 275 456 310 192 155 108 96 7.5
SLP150EC 150 380 275 456 310 192 155 108 96 7.5
SLP200EC 200 435 330 511 364 287 182 122 143 12
SLP250EC 250 435 330 511 364 287 182 122 143 13
SLP315EC 315 710 540 785 572 460 286 243 230 33
SLP400EC 400 710 540 785 572 460 286 243 230 36
SLP500EC 500 898 735 975 770 577 385 326 230 58
Slimpack SLP EC

 

Raadpleeg de tab Downloads voor technische informatie

 

 

ESTIMATED RUNNING COSTS

Calculate estimated running costs for this product using the tool below.
For average costs, leave the default values in place or enter your own figures in the boxes to recalculate.
Where a product has multi speeds, a typical installation has been used for the below calculations.


pence
(Your current electricity cost in pence per hour. This will be listed on your electric bill)
hours
(The average number of hours per day fan to run in Trickle mode)
hours
(The average number of hours per day fan to run in Boost mode)

Based on the inputted figures, estimated running costs would be:

Overview

The New range of Slimpak EC single in-line box fans incorporate an energy efficient EC motor and basic commissioning controls to offer an energy efficient basic fan system.

Manufactured from Galvanised sheet the Slimpak (SLP EC) fan units are internally treated with an ‘O’ class rated, BS476 part 6 & 7, acoustic foam, which offers the benefits of high sound absorption and good
thermal insulation properties, in addition to self extinguishing properties and resistance to ignition.

The casing includes an inclined inlet and bellmouth entry which directs the incoming air to the impeller with minimal turbulence. The result is better air management through the unit, less noise, higher efficiency and
an increased performance.

The housing is designed to be as compact as possible for ceiling or plantroom applications with integral mounting points to allow quick and easy installation.

Motor / Impellers
All SLP EC units feature an energy efficient, Class 1, EC/DC external rotor motor and backward curved impeller assembly specifically chosen for performance and non-overloading characteristics. The assembly is dynamically balanced to DIN ISO 1940 Grade 6.3, duct size 500mm rated IP54, all other sizes, IP44 according to BS EN 60529. Ball bearings are greased for life. Insulation is Class ‘B’ (from -25°C to +60°C). All models incorporate internal electronic overload protection and soft start function.

Control
Every SLP EC unit is fitted with a purpose designed integral commissioning controller giving the ability to set the exact duty required at commissioning. Alternatively the integral potentiometer can be bypassed to allow remote speed control via an external 0-10V potentiometer. Low voltage control wiring is kept separate from the mains wiring.

Electrical
Motors are single phase 230V +/- 10% / 50/60Hz / 1ph (size 100-400mm) or 400V +/- 10% / 50/60Hz / 3ph (size 500mm).

Performance/Sound
Extensively tested to BS848 parts 1 & 2. Published dB(A) figures are free field sound pressure levels at 3m with spherical propagation at reference level of 2 x 10-5 Pa. The inlet/outlet sound power level spectra figures are dB with a reference of 10–12 watts.

Quality Assurance
Design and manufacture are in accordance with the standard for quality management systems BS EN ISO 9001:1994.

Accessories
A full range of accessories are available with the Slimpak EC range of fans such as:
• Remote potentiometer speed controller
• Two speed trickle boost controller
• Pre & secondary filter cassettes
• Electric heater batteries
• Backdraught shutters
• In-line attenuators

Technical

DIMENSIONS:

Stock ref A B C D E F G H I Kg
SLP100EC 100 380 275 456 310 192 155 108 96 7.5
SLP125EC 125 380 275 456 310 192 155 108 96 7.5
SLP150EC 150 380 275 456 310 192 155 108 96 7.5
SLP200EC 200 435 330 511 364 287 182 122 143 12
SLP250EC 250 435 330 511 364 287 182 122 143 13
SLP315EC 315 710 540 785 572 460 286 243 230 33
SLP400EC 400 710 540 785 572 460 286 243 230 36
SLP500EC 500 898 735 975 770 577 385 326 230 58
Slimpack SLP EC

Downloads