Quiet Pack Twin Fan (QPTW) - In-Line Twin Fans

• Air volumes up to 1.35m3/s
• Suitable for external pressures up to 450Pa
• Designed to suit duct diameters from 100 to 500mm
• Operating temperatures up to 40°C
• Speed controllable
• Quality assurance to BS EN ISO 9001:1994
• Performance tested to BS848 Part 1 1980
 

Select a product

The Quiet Pack Twin in-line fans are as supplied from Roof Units, designed around a high performance centrifugal impeller, offering a highly efficient, quiet and compact twin in-line acoustic fan.

The Quiet Pack Twin fan range is manufactured from prime quality galvanised sheet steel, ensuring a robust twin in-line fan for those tough site conditions.

Casings are suitable for internal mounting only and internally treated with an ‘O’ class rated acoustic foam, which offers the benefits of excellent low level duct bound and breakout sound levels, in addition self extinguishing properties, zero burn rate, resistant to ignition, and no
toxic fumes.
Quiet Pack Twin fans are suitable for circular ducting ranging in sizes  100, 125, 150, 160, 200, 250, 315, 400 and 500mm, with air volumes up to 1.35m3/s and pressure development of up to 450Pa.

They are specially designed to allow the unit to be mounted via drop rods or anti vibration mounts, ensuring a quick and easy solution to installation with all units fitted with backdraught shutters to prevent air
flow returning back through the system during shutdown periods.

Impellers
The motor and backward curved impeller is factory matched, statically and dynamically balanced on precision machines, to ISO 1940 Grade 6.3., to give quiet, vibration free running.

Motors
Motor insulation Class B, suitable for operating temperatures from -15°C up to +40°C and atmospheres up to 95% RH.

All sizes are suitable for speed control by electronic or voltage reduction. Vent-Axia would recommend that a voltage reduction Auto Transformer speed controller is used with all units to ensure minimum noise levels during speed control and to eliminate any possibility of harmonic noise levels which may occur when using electronic speed controllers at lower speeds.

Performance
The fan performance is in accordance with tests to BS848 Part 1 1980, with the fan sound levels measured in a reverberant chamber in accordance with BS848 Part 2 1985.

Quality Assurance
Design and manufacture is in accordance with the standard for quality management systems BS EN ISO 9001:1994.

Accessories
A full range of accessories are available to compliment the range of
fans such as:
• Manual/Auto Changeover Twin Fan Controllers
• Auto Transformer Speed Controllers
• Electronic Speed Controllers
• D.O.L. Starters
• Standard, Acoustic & Thermal Flexible Ducting
• In-Line Attenuators
• Wall & Roof Terminals
• Fast Clamps

DIMENSIONS:

Unit Size A B ØC D E F Approx Weight (kg)
QPTW100C 610 705 100 591 256 622 26
QPTW125C 610 705 125 591 256 622 26
QPTW150C 610 705 150 591 256 622 26
QPTW200C 801 896 200 703 343 734 39
QPTW250C 925 1020 250 798 354 829 48
QPTW315C 1255 1353 315 1145 536 1176 88
QPTW400C 1255 1353 400 1145 536 1176 90
QPTW500C 1492 1590 500 1533 675 1564 190
quiet_pack_twin_fan.png
Image of ACOB1A Twin Fan Controller
ACOB1A Twin Fan Controller

• Manual or auto changeover facilities
• 2 to 24 hour adjustable duty sharing
• Diagnostic program facility on start up
• Suitable for 1 phase twin fan units up to 8 amps
• Can be wired in conjunction with speed controllers
• Volt free contacts fitted as standard
• Neon failure indicators

Please call 0344 856 0590 for further availability information.

 

Raadpleeg de tab Downloads voor technische informatie

 

 

ESTIMATED RUNNING COSTS

Calculate estimated running costs for this product using the tool below.
For average costs, leave the default values in place or enter your own figures in the boxes to recalculate.
Where a product has multi speeds, a typical installation has been used for the below calculations.


pence
(Your current electricity cost in pence per hour. This will be listed on your electric bill)
hours
(The average number of hours per day fan to run in Trickle mode)
hours
(The average number of hours per day fan to run in Boost mode)

Based on the inputted figures, estimated running costs would be:

Overview

The Quiet Pack Twin in-line fans are as supplied from Roof Units, designed around a high performance centrifugal impeller, offering a highly efficient, quiet and compact twin in-line acoustic fan.

The Quiet Pack Twin fan range is manufactured from prime quality galvanised sheet steel, ensuring a robust twin in-line fan for those tough site conditions.

Casings are suitable for internal mounting only and internally treated with an ‘O’ class rated acoustic foam, which offers the benefits of excellent low level duct bound and breakout sound levels, in addition self extinguishing properties, zero burn rate, resistant to ignition, and no
toxic fumes.
Quiet Pack Twin fans are suitable for circular ducting ranging in sizes  100, 125, 150, 160, 200, 250, 315, 400 and 500mm, with air volumes up to 1.35m3/s and pressure development of up to 450Pa.

They are specially designed to allow the unit to be mounted via drop rods or anti vibration mounts, ensuring a quick and easy solution to installation with all units fitted with backdraught shutters to prevent air
flow returning back through the system during shutdown periods.

Impellers
The motor and backward curved impeller is factory matched, statically and dynamically balanced on precision machines, to ISO 1940 Grade 6.3., to give quiet, vibration free running.

Motors
Motor insulation Class B, suitable for operating temperatures from -15°C up to +40°C and atmospheres up to 95% RH.

All sizes are suitable for speed control by electronic or voltage reduction. Vent-Axia would recommend that a voltage reduction Auto Transformer speed controller is used with all units to ensure minimum noise levels during speed control and to eliminate any possibility of harmonic noise levels which may occur when using electronic speed controllers at lower speeds.

Performance
The fan performance is in accordance with tests to BS848 Part 1 1980, with the fan sound levels measured in a reverberant chamber in accordance with BS848 Part 2 1985.

Quality Assurance
Design and manufacture is in accordance with the standard for quality management systems BS EN ISO 9001:1994.

Accessories
A full range of accessories are available to compliment the range of
fans such as:
• Manual/Auto Changeover Twin Fan Controllers
• Auto Transformer Speed Controllers
• Electronic Speed Controllers
• D.O.L. Starters
• Standard, Acoustic & Thermal Flexible Ducting
• In-Line Attenuators
• Wall & Roof Terminals
• Fast Clamps

Technical

DIMENSIONS:

Unit Size A B ØC D E F Approx Weight (kg)
QPTW100C 610 705 100 591 256 622 26
QPTW125C 610 705 125 591 256 622 26
QPTW150C 610 705 150 591 256 622 26
QPTW200C 801 896 200 703 343 734 39
QPTW250C 925 1020 250 798 354 829 48
QPTW315C 1255 1353 315 1145 536 1176 88
QPTW400C 1255 1353 400 1145 536 1176 90
QPTW500C 1492 1590 500 1533 675 1564 190
quiet_pack_twin_fan.png

Models

Image of ACOB1A Twin Fan Controller
ACOB1A Twin Fan Controller

• Manual or auto changeover facilities
• 2 to 24 hour adjustable duty sharing
• Diagnostic program facility on start up
• Suitable for 1 phase twin fan units up to 8 amps
• Can be wired in conjunction with speed controllers
• Volt free contacts fitted as standard
• Neon failure indicators

Please call 0344 856 0590 for further availability information.

Downloads