NEW Vent-Axia JetDry3®

This product range is now obsolete and no longer available from Vent-Axia. The information here is provided for reference only.

10 Second Dry Time
Patented 3 air outlets (top, left, and right) generates more consistent air speeds and dries hands more thoroughly
Brushed DC motor
Ceramic plate absorbs water then evaporates it
Heater Element: On/Off heating options, 300-450W, adjustable

The NEW JetDry3® has a ceramic plate that absorbs water then evaporates it, and a user friendly design, the JetDry3® really is unique!

PRODUCT SPECIFICATION:

Dry your hands in a more comfortable way - just like you wash them - and watch while the water disappears in to the unique ceramic plate.
The JetDry3® has built-in anti-bacterial protection on its surface and all ABS compenents and the HEPA filter eliminates over 99% of any present bacteria.
The JetDry3® uses a Brushed DC motor and has an optional heater mode. The patented three air outlets generate a consistent air speed which dries hands more thoroughly.
Stock Ref. No. 403606

PERFORMANCE:

Operational Power: 1200W
Motor Type: 1HP, 350-750W, 11,000-20,000rpm, adjustable
Heater Element: ON/OFF heating options. 300-450W, adjustable
Operating Voltage: 220-240V, 50/60Hz, 9.2-10A, 1.0-1.2W
Circuit Operation: Infrared Automatic, self-adjusting
High Brightness LED: Standby: Red; Active: Blue
Drying Time: Less than 10-15 seconds
Drip Proof: IP23 Rated
Isolation: Class 1
Ceramic plate max. continued usage: 280, drain tray included
Warm Air Speed Output: 65-100 m/s (140-224 mi/hr) adjustable
Air Performance: 89-124m3 /h (56-76cfm) adjustable
Net Weight: 10.8kg (23.8lbs)
Gross Weight: 12.8 (28.2lbs)
Sensor Range: 12cm + / -1 cm (4-23/32")
Motor Thermal Protection: Auto resetting thermostat turns unit off, 120V at 135℃
Heater Thermal Protection: Auto resetting thermostat turns unit off a 85℃. Heater Thermal cut off at 142℃
Sound Pressure: min. 65 dB(A) max. @ 1m
Super Filter Assembly: Antibacterial Filter + Carbon Filter
Casing: Plastic mouldings incorporate NSF certified Ionpure additive

DIMENSIONS:

322 x 560 x 185mm (WxDxH)

 

Raadpleeg de tab Downloads voor technische informatie

 

 

ESTIMATED RUNNING COSTS

Calculate estimated running costs for this product using the tool below.
For average costs, leave the default values in place or enter your own figures in the boxes to recalculate.
Where a product has multi speeds, a typical installation has been used for the below calculations.


pence
(Your current electricity cost in pence per hour. This will be listed on your electric bill)
hours
(The average number of hours per day fan to run in Trickle mode)
hours
(The average number of hours per day fan to run in Boost mode)

Based on the inputted figures, estimated running costs would be:

Overview

The NEW JetDry3® has a ceramic plate that absorbs water then evaporates it, and a user friendly design, the JetDry3® really is unique!

Technical

PRODUCT SPECIFICATION:

Dry your hands in a more comfortable way - just like you wash them - and watch while the water disappears in to the unique ceramic plate.
The JetDry3® has built-in anti-bacterial protection on its surface and all ABS compenents and the HEPA filter eliminates over 99% of any present bacteria.
The JetDry3® uses a Brushed DC motor and has an optional heater mode. The patented three air outlets generate a consistent air speed which dries hands more thoroughly.
Stock Ref. No. 403606

PERFORMANCE:

Operational Power: 1200W
Motor Type: 1HP, 350-750W, 11,000-20,000rpm, adjustable
Heater Element: ON/OFF heating options. 300-450W, adjustable
Operating Voltage: 220-240V, 50/60Hz, 9.2-10A, 1.0-1.2W
Circuit Operation: Infrared Automatic, self-adjusting
High Brightness LED: Standby: Red; Active: Blue
Drying Time: Less than 10-15 seconds
Drip Proof: IP23 Rated
Isolation: Class 1
Ceramic plate max. continued usage: 280, drain tray included
Warm Air Speed Output: 65-100 m/s (140-224 mi/hr) adjustable
Air Performance: 89-124m3 /h (56-76cfm) adjustable
Net Weight: 10.8kg (23.8lbs)
Gross Weight: 12.8 (28.2lbs)
Sensor Range: 12cm + / -1 cm (4-23/32")
Motor Thermal Protection: Auto resetting thermostat turns unit off, 120V at 135℃
Heater Thermal Protection: Auto resetting thermostat turns unit off a 85℃. Heater Thermal cut off at 142℃
Sound Pressure: min. 65 dB(A) max. @ 1m
Super Filter Assembly: Antibacterial Filter + Carbon Filter
Casing: Plastic mouldings incorporate NSF certified Ionpure additive

DIMENSIONS:

322 x 560 x 185mm (WxDxH)

Downloads

Related Products

Useful links