Multivent

• Fitted with four extract 100 or 125mm diameter spigots allowing quick connection to ducts
• Option of wall, ceiling and loft mounting
• Quiet running suitable for continuous operation
• Can extract from a number of rooms, depending on the dwelling
• Wireless Controller available

Select a product

The Multivent continuous mechanical extract ventilation range is designed for the simultaneous ventilation of separate areas in the home or as a multipoint extractor system for a wide range of commercial applications.

In the home the system is usually located in the loft or airing cupboard with ducts taken to the bathroom, kitchen and utility room to remove water vapour at source and from toilets to remove odours.

Multivent is ideal for a range of commercial applications such as toilets, fitting rooms and kiosks. The units can be installed at any angle and where the ambient air has a high humidity content condensate drains are provided.

The Multivent H version incorporates a built-in humidity sensor to switch between two of the three speeds. A Wireless Controller is available for use with the Multivent H with three speed options offering total control of the systems.

PERFORMANCE:

Graphs:

DIMENSIONS:

Weight: 5.50kg
Technical Data

|------------------- Settings -------------------|

 
Low
Medium
High

 
Current
Amps
Power
Watts
Current
Amps
Power
Watts
Current
Amps
Power
Watts

 MV250
0.2
25
0.30
54
0.34
81

 MV250H
0.2
25
0.30
54
0.34
81

Sound Levels

FID
|------------- dB(A) @ 3m -------------|

 
Performance m³/h
Casing Breakout
Duct Inlet 100mm Ø
Duct Inlet 125mm Ø

 MV250
low
medium
high

161
305
443

22.4
31.0
35.4

27.9
42.9
48.6

27.8
43.2
48.0

 MV250H
low
medium
high

175
344
443

22.4
31.0
35.4

27.9
42.9
48.6

27.8
43.2
48.0

Published dB(A) figures are free field sound levels at 3m with spherical propagation at a reference level of 2 x 10–5 Pa.The free field sound power level spectra figures are dB with reference of 10–12 Watts.

Image of MV250H
MV250H
The Multivent continuous mechanical extract ventilation range is designed for the simultaneous ventilation of separate areas in the home or as a multi-point extractor system for a wide range of commercial applications. In the home the system is usually located in the loft or airing cupboard with ducts taken to the bathroom, kitchen and utility room to remove water vapour at source and from WC's to remove odours. Designed to provide 0.7 of an air change based on the volume of the building, the Multivent system provides adequate ventilation, even in a 'tight' dwelling. Pollutant concentrations and humidity can be controlled. The Multivent H versions are now available with 2 control options. An integral humidity sensor that will detect any rise in humidity within the system and will boost between any 2 of the 3 speeds. A new Wire-less Controller is available for use with the Multivent H with 3 speed options offering total control of the systems. Multivent MV250 and MV350 are guaranteed for 2 years with an extended motor guarantee to 5 years offered on the MVDC LoWatt Energy Saving model.
Please call 0344 856 0590 for further availability information.
Image of Multivent Wireless Controller
Multivent Wireless Controller
For use with MV250H, MV350H & MVDCH version only
Please call 0344 856 0590 for further availability information.

Overview

The Multivent continuous mechanical extract ventilation range is designed for the simultaneous ventilation of separate areas in the home or as a multipoint extractor system for a wide range of commercial applications.

In the home the system is usually located in the loft or airing cupboard with ducts taken to the bathroom, kitchen and utility room to remove water vapour at source and from toilets to remove odours.

Multivent is ideal for a range of commercial applications such as toilets, fitting rooms and kiosks. The units can be installed at any angle and where the ambient air has a high humidity content condensate drains are provided.

The Multivent H version incorporates a built-in humidity sensor to switch between two of the three speeds. A Wireless Controller is available for use with the Multivent H with three speed options offering total control of the systems.

Technical

PERFORMANCE:

Graphs:

DIMENSIONS:

Weight: 5.50kg
Technical Data

|------------------- Settings -------------------|

 
Low
Medium
High

 
Current
Amps
Power
Watts
Current
Amps
Power
Watts
Current
Amps
Power
Watts

 MV250
0.2
25
0.30
54
0.34
81

 MV250H
0.2
25
0.30
54
0.34
81

Sound Levels

FID
|------------- dB(A) @ 3m -------------|

 
Performance m³/h
Casing Breakout
Duct Inlet 100mm Ø
Duct Inlet 125mm Ø

 MV250
low
medium
high

161
305
443

22.4
31.0
35.4

27.9
42.9
48.6

27.8
43.2
48.0

 MV250H
low
medium
high

175
344
443

22.4
31.0
35.4

27.9
42.9
48.6

27.8
43.2
48.0

Published dB(A) figures are free field sound levels at 3m with spherical propagation at a reference level of 2 x 10–5 Pa.The free field sound power level spectra figures are dB with reference of 10–12 Watts.

Models

Image of MV250H
MV250H
The Multivent continuous mechanical extract ventilation range is designed for the simultaneous ventilation of separate areas in the home or as a multi-point extractor system for a wide range of commercial applications. In the home the system is usually located in the loft or airing cupboard with ducts taken to the bathroom, kitchen and utility room to remove water vapour at source and from WC's to remove odours. Designed to provide 0.7 of an air change based on the volume of the building, the Multivent system provides adequate ventilation, even in a 'tight' dwelling. Pollutant concentrations and humidity can be controlled. The Multivent H versions are now available with 2 control options. An integral humidity sensor that will detect any rise in humidity within the system and will boost between any 2 of the 3 speeds. A new Wire-less Controller is available for use with the Multivent H with 3 speed options offering total control of the systems. Multivent MV250 and MV350 are guaranteed for 2 years with an extended motor guarantee to 5 years offered on the MVDC LoWatt Energy Saving model.
Please call 0344 856 0590 for further availability information.

Accessories

Image of Multivent Wireless Controller
Multivent Wireless Controller
For use with MV250H, MV350H & MVDCH version only
Please call 0344 856 0590 for further availability information.

Downloads