Man Cooler fans - MC

This product range is now obsolete and no longer available from Vent-Axia. The information here is provided for reference only.

At a Glance:

Based on an integrated axial impeller and internal rotor motor design.
Fully portable and feature an adjustable head which tilts for maximum air movement effect.
Lightweight and shorter than most similar fans.
Impellers are moulded is glass filled polyamide for resistance to outdoor conditions.
2 Year Guarantee

FAQ's Answered:

Motors protected to IP65
Motor Insulation Class 'F'
Maximum overating temperature 70°C
Standard Thermal Overload Protection
Manufacture controlled to BS EN ISO 9001
Service Isolator fitted
Can be speed controlled

Man Coolers are available in three sizes and are based on an integrated axial impeller and internal rotor motor design which produces a compact unit.

Fully portable, Man Coolers feature an adjustable head which can tilt for maximum air movement effect. The robust frame provides excellent stability.

The fans incorporate specially designed bellmouth inlets and finger guards which provide protection to International Standards.

Lightweight and shorter than most similar fans, the casing is constructed from rolled steel plate, electro welded and protected with a tough epoxy paint finish. Fan outputs are tested to AMCA standard 210.

Long Life Motor / Impellers

The internal rotor motors are specifically designed and styled for this range of fans. The ball bearings are greased for life and allow the fan to be installed at any angle. Rotors are dynamically balance to ISO 1940. Motors are protected to IP65 against dust and water jets complying with BS EN 60529. They have ribbed aluminium body castings for efficient cooling. Motor insulation is Class 'F' (from-40°C to +70°C).

Terminal Box
To IP65, protected against dust and water jets from any angle, allowing outside applications.

Impellers are moulded in glass filled polyamide for resistance to outdoor conditions and abrasive airflow.

Electrical

Sizes 315, 400 and 630 available in single phase 220-240V 50 Hz, 315, 400 also available in 110V 50Hz. Capacitor start and run. A terminal Box is supplied with all models with cable gland and On/Off switch to IP65.

Capacitors are located in the terminal box. All motors are fitted with Standard Thermal Overload Protection (S.T.O.P).

DIMENSIONS:

Diameter b c d e f kg
315 315 211 400 439 470 642 13.5
400 400 227 557 600 560 841 36.5
630 630 307 750 890 840 1149 91

PDF DOWNLOADS:

 

Raadpleeg de tab Downloads voor technische informatie

 

 

Overview

Man Coolers are available in three sizes and are based on an integrated axial impeller and internal rotor motor design which produces a compact unit.

Fully portable, Man Coolers feature an adjustable head which can tilt for maximum air movement effect. The robust frame provides excellent stability.

The fans incorporate specially designed bellmouth inlets and finger guards which provide protection to International Standards.

Lightweight and shorter than most similar fans, the casing is constructed from rolled steel plate, electro welded and protected with a tough epoxy paint finish. Fan outputs are tested to AMCA standard 210.

Long Life Motor / Impellers

The internal rotor motors are specifically designed and styled for this range of fans. The ball bearings are greased for life and allow the fan to be installed at any angle. Rotors are dynamically balance to ISO 1940. Motors are protected to IP65 against dust and water jets complying with BS EN 60529. They have ribbed aluminium body castings for efficient cooling. Motor insulation is Class 'F' (from-40°C to +70°C).

Terminal Box
To IP65, protected against dust and water jets from any angle, allowing outside applications.

Impellers are moulded in glass filled polyamide for resistance to outdoor conditions and abrasive airflow.

Electrical

Sizes 315, 400 and 630 available in single phase 220-240V 50 Hz, 315, 400 also available in 110V 50Hz. Capacitor start and run. A terminal Box is supplied with all models with cable gland and On/Off switch to IP65.

Capacitors are located in the terminal box. All motors are fitted with Standard Thermal Overload Protection (S.T.O.P).

Technical

DIMENSIONS:

Diameter b c d e f kg
315 315 211 400 439 470 642 13.5
400 400 227 557 600 560 841 36.5
630 630 307 750 890 840 1149 91

Downloads

PDF DOWNLOADS:

!!! Catalogue Pages