Lo-Carbon T-Series Wall Models

At a Glance:

Extract/intake model in 2 sizes: Size 9 and 12.
Patented electronic shutter system ensures quiet trouble free operation.
Designed to comply with International safety standards.
Up to 80% energy saving

.
FAQs Answered:

Long life LoWatt motors last twice as long as conventional motors
Wired or Wire-less fan models available
5 year guarantee.

* Savings are based on an annual usage of 12 hours a day

Select a product

UK's No. 1 Commercial Fan
BBehind the grille of the Lo-Carbon T-Series Wall model is a high performance extract/intake ventilating unit designed to fit through most wall thicknesses using the telescopic liner supplied.
For walls of exceptional thickness additional liners can be used. Conduit entry is provided for concealed wiring.

External Brick Walls
Lo-Carbon T-Series wall models are designed to fit directly into double brick, solid and cavity walls. The two part telescopic liner accommodates wall thicknesses from 240 to 315mm. For thicker walls additional liner sections are available. Lo-Carbon T-Series wall models are provided with internal and external wall frames which fit flush with both faces of the wall.

Instantaneous Shutter
Lo-Carbon T-Series models are supplied complete with an integral instantaneous automatic louvre shutter which will operate on both intake and extract and at any angle of mounting.

When the ventilating unit is used with a Lo-Carbon T-Series controller, the shutter can be set open with the fan motor switched Off to provide natural ventilation without the security risk of an open window.

Internal Grille with unit mounted externally
When a more unobtrusive installation is required or access for cleaning is only available from the outside, LoWatt T-Series window models may be installed on a Vent-Axia removable wall fixing plate with an eggcrate grille fitted to the inside wall face.

PERFORMANCE:

Unit Size LoWatt TX9WL Wireless LoWatt TX9WL
Stock Ref. No. 45 61 70 45 61 66
Amps @ 240V 0.31 0.31
Extract Performance m³/h Low 326 326
Extract Performance m³/h Med 562 562
Extract Performance m³/h High 732 732
Watts (high) 27 27
dB(A) (med) @ 3m 39 39
---
Unit Size LoWatt TX12WL Wireless LoWatt TX12WL
Stock Ref. No. 45 61 78 45 61 74
Amps @ 240V 0.70 0.70
Extract Performance m³/h Low 660 660
Extract Performance m³/hMed 1355 1355
Extract Performance m³/hHigh 1650 1650
Watts (high) 68 68
dB(A) (med) @ 3m 48 48
---
Recommended Controller:
Wire-less Controller Stock Ref. No. 45 58 74
Wired Controller Stock Ref. No. 45 58 73

DIMENSIONS:

Size A B C D E F Weight kg
230mm 391 388 365 375 143 54 7.77
300mm 470 467 442 450 182 54 10.864
Image of Lo-Carbon TX9WL Wireless
Lo-Carbon TX9WL Wireless
Behind the grille of the Lo-Carbon T-Series Wall model is a high performance extract/intake ventilating unit designed to fit through most wall thicknesses using the telescopic liner supplied. For walls of exceptional thickness additional liners can be used. Conduit entry is provided for concealed wiring.
Please call 0344 856 0590 for further availability information.
Image of Lo-Carbon TX12WL Wireless
Lo-Carbon TX12WL Wireless
Behind the grille of the Lo-Carbon T-Series Wall model is a high performance extract/intake ventilating unit designed to fit through most wall thicknesses using the telescopic liner supplied. For walls of exceptional thickness additional liners can be used. Conduit entry is provided for concealed wiring.
Please call 0344 856 0590 for further availability information.
Image of LoWatt T-Series Wired Controller
LoWatt T-Series Wired Controller
LoWatt T-Series Controllers are available in both Wired and Wire-less FM versions. The three speed push button surface mounted controllers provide intake/extract and shutter only options and auto mode position for use with external sensors. Wired versions are connected to the fan using a plug-in Safety Extra Low Voltage 2-core signal cable supplied (10m), allowing simple and safe installation. Alternatively, the Wire-less FM controller offers full control without the need for any wiring, ideal for premises where installations need to be carried out with minimum disruption or where surface wiring can be classed as unsightly or obtrusive.
Please call 0344 856 0590 for further availability information.
Image of Ambient Response Humidity Sensor Lo-Carbon
Ambient Response Humidity Sensor Lo-Carbon
Designed specifically for the Lo-Carbon product range. The latest self programming electronic On/Off wall mounted humidity sensor which reacts to any rapid increase in humidity and temperature by switching a Vent-Axia fan ‘On’ for rapid removal of moisture laden air, in domestic bathrooms and kitchens. Night time RH increment setback feature suppresses nuisance ripping when the humidity level gradually rises as the temperature falls. Features & Benefits: Ambient operating temp range +5°C to +40°C. Changeover relay switch. DEMKO Approved. Dimensions: 87 x 87 x 33mm (H x W x D). Operating range: 30%-90% RH. Pullcord override and neon indicator. Will fit single gang box for surface mounting. Downloads Catalogue Pages
Please call 0344 856 0590 for further availability information.
Image of Ecotronic Humidity Sensor (Sentinel)
Ecotronic Humidity Sensor (Sentinel)
Humidity Control is automatic and can be set to switch between 65 and 90%RH. An integral pullcord provides a manual override function if required. Can be wired for either ON/OFF or Trickle Boost operation. Set Point adjustable. Maximum switching load 1 amp inductive. Pullcord override indicator Ambient operating temperature 0°C to +40°C. Dimensions:87 x 87 x 33mm (H x W x D). Supply voltage 24V DC SELV. Humidity sensors should be sited approx. 100mm below ceiling level and not above cupboards, refer to siting details in fitting and wiring instructions supplied with product.
Please call 0344 856 0590 for further availability information.
Image of Air Quality Sensor (Sentinel)
Air Quality Sensor (Sentinel)
Automatically reacts to the deterioration of air quality, sensing tobacco smoke, smells and toilet odours to regulate mechanically ventilated areas, such as cinemas, pubs, clubs, restaurants, kitchens, toilets and conference rooms. The sensor switches when the air quality declines below an adjustable preset level. This is registered by a self-cleaning ceramic sensing head. The air quality sensor should not be used for the detection of combustible gases. Ambient operating temperature range 0°C to +50°C. MIN - MAX mode or direct Damper control. Dimensions:87 x 157 x 47mm (H xWxD) Surface mounted. 1 - 25 min O/R timer. Supply voltage 24V DC SELV.
Please call 0344 856 0590 for further availability information.

Overview

UK's No. 1 Commercial Fan
BBehind the grille of the Lo-Carbon T-Series Wall model is a high performance extract/intake ventilating unit designed to fit through most wall thicknesses using the telescopic liner supplied.
For walls of exceptional thickness additional liners can be used. Conduit entry is provided for concealed wiring.

External Brick Walls
Lo-Carbon T-Series wall models are designed to fit directly into double brick, solid and cavity walls. The two part telescopic liner accommodates wall thicknesses from 240 to 315mm. For thicker walls additional liner sections are available. Lo-Carbon T-Series wall models are provided with internal and external wall frames which fit flush with both faces of the wall.

Instantaneous Shutter
Lo-Carbon T-Series models are supplied complete with an integral instantaneous automatic louvre shutter which will operate on both intake and extract and at any angle of mounting.

When the ventilating unit is used with a Lo-Carbon T-Series controller, the shutter can be set open with the fan motor switched Off to provide natural ventilation without the security risk of an open window.

Internal Grille with unit mounted externally
When a more unobtrusive installation is required or access for cleaning is only available from the outside, LoWatt T-Series window models may be installed on a Vent-Axia removable wall fixing plate with an eggcrate grille fitted to the inside wall face.

Technical

PERFORMANCE:

Unit Size LoWatt TX9WL Wireless LoWatt TX9WL
Stock Ref. No. 45 61 70 45 61 66
Amps @ 240V 0.31 0.31
Extract Performance m³/h Low 326 326
Extract Performance m³/h Med 562 562
Extract Performance m³/h High 732 732
Watts (high) 27 27
dB(A) (med) @ 3m 39 39
---
Unit Size LoWatt TX12WL Wireless LoWatt TX12WL
Stock Ref. No. 45 61 78 45 61 74
Amps @ 240V 0.70 0.70
Extract Performance m³/h Low 660 660
Extract Performance m³/hMed 1355 1355
Extract Performance m³/hHigh 1650 1650
Watts (high) 68 68
dB(A) (med) @ 3m 48 48
---
Recommended Controller:
Wire-less Controller Stock Ref. No. 45 58 74
Wired Controller Stock Ref. No. 45 58 73

DIMENSIONS:

Size A B C D E F Weight kg
230mm 391 388 365 375 143 54 7.77
300mm 470 467 442 450 182 54 10.864

Models

Image of Lo-Carbon TX9WL Wireless
Lo-Carbon TX9WL Wireless
Behind the grille of the Lo-Carbon T-Series Wall model is a high performance extract/intake ventilating unit designed to fit through most wall thicknesses using the telescopic liner supplied. For walls of exceptional thickness additional liners can be used. Conduit entry is provided for concealed wiring.
Please call 0344 856 0590 for further availability information.
Image of Lo-Carbon TX12WL Wireless
Lo-Carbon TX12WL Wireless
Behind the grille of the Lo-Carbon T-Series Wall model is a high performance extract/intake ventilating unit designed to fit through most wall thicknesses using the telescopic liner supplied. For walls of exceptional thickness additional liners can be used. Conduit entry is provided for concealed wiring.
Please call 0344 856 0590 for further availability information.

Accessories

Image of LoWatt T-Series Wired Controller
LoWatt T-Series Wired Controller
LoWatt T-Series Controllers are available in both Wired and Wire-less FM versions. The three speed push button surface mounted controllers provide intake/extract and shutter only options and auto mode position for use with external sensors. Wired versions are connected to the fan using a plug-in Safety Extra Low Voltage 2-core signal cable supplied (10m), allowing simple and safe installation. Alternatively, the Wire-less FM controller offers full control without the need for any wiring, ideal for premises where installations need to be carried out with minimum disruption or where surface wiring can be classed as unsightly or obtrusive.
Please call 0344 856 0590 for further availability information.
Image of Ambient Response Humidity Sensor Lo-Carbon
Ambient Response Humidity Sensor Lo-Carbon
Designed specifically for the Lo-Carbon product range. The latest self programming electronic On/Off wall mounted humidity sensor which reacts to any rapid increase in humidity and temperature by switching a Vent-Axia fan ‘On’ for rapid removal of moisture laden air, in domestic bathrooms and kitchens. Night time RH increment setback feature suppresses nuisance ripping when the humidity level gradually rises as the temperature falls. Features & Benefits: Ambient operating temp range +5°C to +40°C. Changeover relay switch. DEMKO Approved. Dimensions: 87 x 87 x 33mm (H x W x D). Operating range: 30%-90% RH. Pullcord override and neon indicator. Will fit single gang box for surface mounting. Downloads Catalogue Pages
Please call 0344 856 0590 for further availability information.
Image of Ecotronic Humidity Sensor (Sentinel)
Ecotronic Humidity Sensor (Sentinel)
Humidity Control is automatic and can be set to switch between 65 and 90%RH. An integral pullcord provides a manual override function if required. Can be wired for either ON/OFF or Trickle Boost operation. Set Point adjustable. Maximum switching load 1 amp inductive. Pullcord override indicator Ambient operating temperature 0°C to +40°C. Dimensions:87 x 87 x 33mm (H x W x D). Supply voltage 24V DC SELV. Humidity sensors should be sited approx. 100mm below ceiling level and not above cupboards, refer to siting details in fitting and wiring instructions supplied with product.
Please call 0344 856 0590 for further availability information.
Image of Air Quality Sensor (Sentinel)
Air Quality Sensor (Sentinel)
Automatically reacts to the deterioration of air quality, sensing tobacco smoke, smells and toilet odours to regulate mechanically ventilated areas, such as cinemas, pubs, clubs, restaurants, kitchens, toilets and conference rooms. The sensor switches when the air quality declines below an adjustable preset level. This is registered by a self-cleaning ceramic sensing head. The air quality sensor should not be used for the detection of combustible gases. Ambient operating temperature range 0°C to +50°C. MIN - MAX mode or direct Damper control. Dimensions:87 x 157 x 47mm (H xWxD) Surface mounted. 1 - 25 min O/R timer. Supply voltage 24V DC SELV.
Please call 0344 856 0590 for further availability information.

Downloads