Lo-Carbon Solo Plus SELV T

  • Up to 70% energy saving
  • Filterless as standard - innovative impeller design means no need for a filter
  • 5 Year Lo-Carbon motor guarantee
  • Meets current Building Regulations Approved Documents F & L
  • IPX4 rated - IPX7 rated (SELV)
  • Flush or surface mountable with adjustable rear or side exit spigot
  • SELV models suitable for installation over or within reach of a shower or bath
  • Extremely low sound levels
  • Suitable for wall, ceiling and panel mounting
  • SELV Models - Supplied with a remote transformer
/VA_LC_Solo_Plus_Range.jpg

Product Overview

Ventilation Type
Residential Ventilation
Sector
Social Housing
Application
Bathroom
Kitchen
Utility
Toilet
Product Range
Lo-Carbon Solo Plus
Ducting/Connection Size
100mm

Long Life Ventilation
The Lo-Carbon Solo Plus range from Vent-Axia has been specially designed for through the wall and ducted applications, suitable for internal bathrooms, toilets and other small rooms. Finished in white, the Lo-Carbon Solo Plus can be flush or surface mounted, with a 2 position 100mm circular spigot for rear entry or connecting to a vertical ducting system. The powerful centrifugal impeller allows installations using 100mm ducting in straight runs, whilst still achieving 15l/s as required by Building Regulations Approved Document F.

Continuous running products, such as the Lo-Carbon Solo Plus, installed in all wet areas of a dwelling are classed as a wholehouse ventilation system and therefore only need to move the amount of air as outlined in table 5.1a and 5.1b of Building Regulations Approved Document F.

The Lo-Carbon Solo Plus has an adjustable boost speed which is set at installation variable between a wall or duct setting for boost/override operation to meet Building Regulations thus ensuring minimum energy usage and low sound levels. All models have an optional speed for constant trickle ventilation (12l/s), selectable at installation. Depending on the model, the fan will switch from trickle (if selected) to boost via the pullcord/light switch/humidity sensor/PIR.

All models can be wall, panel or ceiling mounted and can be connected to either circular, rectangular or Vent-Axia’s flat ducting. Enclosure of the electrical components is manufactured from flame retardant grade material.

Safety Extra Low Voltage Fan (SELV)
Designed for areas where a fan has to be fitted over or within Zone 1 in a room containing a fixed bath or shower according to IEE wiring regulations (BS 7671), the Lo-Carbon Solo Plus SELV fan can be safely installed within the spray area. The fan is rated IPX7. Control is by the supplied mains safety isolating transformer unit with 12V DC SELV output, which is sited away from any source of spray and out of reach of a person using a fixed bath or shower. Controller Supply voltage 220-240V/1/50Hz. Output to fan SELV 12V DC.

Product Downloads

Installation Instructions

Catalogue Pages

Other Documents

Accessories