Lo-Carbon Sentinel Multivent / Plus

• Reduces your carbon footprint
• Recognised in SAP PCDB
• Specific fan power as low as 0.16 W/l/s
• Suitable for use with external sensors and controllers
• Wireless control option
• Complies with Building Regulations ADF and ADL
• Manufactured in the UK from recyclable materials

Select a product

Sentinel Multivent continuous mechanical extract ventilation, MEV is designed for the simultaneous ventilation of separate areas in the home or as a multipoint extraction system for a wide range of commercial applications. The units can be installed at any angle. Where the ambient air has a high humidity content condensate drains are provided.

In support of Sentinel Multivent, Vent-Axia offers:
• Practical advice on product selection and installation
• Guidance on solutions to meet legislation requirements
• Project management and site deliveries
• After sales support and maintenance information

The need to improve efficiency
Sentinel Multivent has been designed to meet the exacting demands of developers, installers and users offering advanced control options and easier installation and commissioning.
• Demand Control - enables precise ventilation rate, is set in 1% increments based on property size
• Integral LCD display allows the installer to select appropriate low, normal and boost speeds to meet demand
• Manual and automatic control options
• Integral adjustable overrun timer and delay on timer
• Plug-n-Play automatic sensor detection
• Switched live and SELV connections
• Dry Out setting – Option set at installation, Sentinel Multivent will run on boost for 1 week to assist in removing moisture
• Optional Wireless Control – up to 4 controllers on any one system
• Energy efficient EC/DC motors - 1/3 less energy lost to heat than a conventional AC motor
• Low Specific Fan Power (SFP) making it one of the most efficient products on the market

Legislation
• Meets Building Regulations Approved Document F (System 3)
• Recognised in SAP PCDB up to kitchen + 6 wet rooms
• Meets carbon footprint reduction targets
• Lowest SFP figures of any demand control MEV system

The need for better health
Removal of pollutants such as moisture, carbon dioxide and external fumes are all important factors in maintaining indoor air quality, helping to create a healthier living environment.
• The integral humidity sensor (Sentinel Multivent H) increases fan speed in proportion to relative humidity levels, saving energy and reducing noise
• The sensor also reacts to small but rapid increases in humidity, even if the normal trigger threshold is not reached. This unique feature ensures adequate ventilation, even for the smallest wet room
• Night time relative humidity increment setback feature suppresses nuisance tripping as humidity gradually increases with falling temperature
• Acoustically lined - low noise levels only 18.1 dB(A) @ 3m

SAP PCDB
In order to make the right choice, developers and contractors should refer to Building Regulations ADL1a, SAP 2012 and SAP PCDB. SAP PCDB was launched in June 2006 to reward innovative ventilation manufacturers by testing and listing energy efficient products that assist in helping developers meet their Target Emission Rates (TER). SAP is the underpinning methodology behind the Energy Performance Certificates and is used to demonstrate compliance with Building Regulations for Dwellings - Approved Document L (England and Wales), Section 6 (Scotland) and Approved Document F (Northern Ireland). SAP PCDB specifically relates to wholehouse ventilation systems and lists a number of Vent-Axia Mechanical Ventilation solutions which offer an improved SAP rating over and above the default for these product types.

Your Carbon Footprint
The Carbon Footprint is a measure of the amount of carbon dioxide (CO2) emitted through the burning of fossil fuels. From a residential and commercial building perspective, it is the amount of carbon generated when you consume a kilowatt of electricity. Reducing a building’s carbon footprint will ultimately reduce electricity bills and save money for every individual household or business. It will also help meet the UK target for the reduction of emissions, as well as allowing you to help the environment.

 

DIMENSIONS:

Dimensions (mm)

A B C D E F G H I J
340 72.5 25 15 360 214 310 260 150 85

 

Image of Lo-Carbon Sentinel Multivent H
Lo-Carbon Sentinel Multivent H
Continuous running mechanical extract system with integral humidity sensor, designed for the simultaneous ventilation of separate ares in the home or as a multipoint extraction system for a wide range of commercial applications. The integral humidity sensor increases fan speed in proportion to relative humidity levels, saving energy and reducing noise.
Please call 0344 856 0590 for further availability information.
Image of Lo-Carbon Sentinel Multivent
Lo-Carbon Sentinel Multivent
Continuous running mechanical extract system, designed for the simultaneous ventilation of separate ares in the home or as a multipoint extraction system for a wide range of commercial applications.
Please call 0344 856 0590 for further availability information.
Image of Wireless Transmitter Controller Receiver Kit
Wireless Transmitter Controller Receiver Kit
• Manual boost • Adjustable overrun timer • Easy wire-less installation • Reduces installation time • Future proof - add more controllers at any time
Please call 0344 856 0590 for further availability information.
Image of Ambient Response Humidity Sensor Lo-Carbon
Ambient Response Humidity Sensor Lo-Carbon
Designed specifically for the Lo-Carbon product range. The latest self programming electronic On/Off wall mounted humidity sensor which reacts to any rapid increase in humidity and temperature by switching a Vent-Axia fan ‘On’ for rapid removal of moisture laden air, in domestic bathrooms and kitchens. Night time RH increment setback feature suppresses nuisance ripping when the humidity level gradually rises as the temperature falls. Features & Benefits: Ambient operating temp range +5°C to +40°C. Changeover relay switch. DEMKO Approved. Dimensions: 87 x 87 x 33mm (H x W x D). Operating range: 30%-90% RH. Pullcord override and neon indicator. Will fit single gang box for surface mounting. Downloads Catalogue Pages
Please call 0344 856 0590 for further availability information.
Image of Air Quality Sensor (Sentinel)
Air Quality Sensor (Sentinel)
Automatically reacts to the deterioration of air quality, sensing tobacco smoke, smells and toilet odours to regulate mechanically ventilated areas, such as cinemas, pubs, clubs, restaurants, kitchens, toilets and conference rooms. The sensor switches when the air quality declines below an adjustable preset level. This is registered by a self-cleaning ceramic sensing head. The air quality sensor should not be used for the detection of combustible gases. Ambient operating temperature range 0°C to +50°C. MIN - MAX mode or direct Damper control. Dimensions:87 x 157 x 47mm (H xWxD) Surface mounted. 1 - 25 min O/R timer. Supply voltage 24V DC SELV.
Please call 0344 856 0590 for further availability information.
Image of Ecotronic Humidity Sensor (Sentinel)
Ecotronic Humidity Sensor (Sentinel)
Humidity Control is automatic and can be set to switch between 65 and 90%RH. An integral pullcord provides a manual override function if required. Can be wired for either ON/OFF or Trickle Boost operation. Set Point adjustable. Maximum switching load 1 amp inductive. Pullcord override indicator Ambient operating temperature 0°C to +40°C. Dimensions:87 x 87 x 33mm (H x W x D). Supply voltage 24V DC SELV. Humidity sensors should be sited approx. 100mm below ceiling level and not above cupboards, refer to siting details in fitting and wiring instructions supplied with product.
Please call 0344 856 0590 for further availability information.
Image of Vent-Axia Visionex PIR
Vent-Axia Visionex PIR

A wall or ceiling mounted movement detector for use with any domestic Vent-Axia mains voltage product. Also suitable for use with Vent-Axia T-Series controllers on ‘Auto’ setting and ITC controllers on sensor mode. Features & Benefits: Adjustable timer overrun (5-25 minutes). Ambient operating temperature range 0°C to +50°C. Designed to meet IP43. Double insulated. Fits any UK single gang mounting box. Internal use only. Maximum load: 600W inductive. Not suitable for use with lighting. No switched live required for internal rooms and toilets. Range of detection up to 10 metres. Supply voltage 220-240V/1/50Hz. Volt-free contacts. Downloads Catalogue Pages

Please call 0344 856 0590 for further availability information.
Image of Kinetic Integral Humidistat
Kinetic Integral Humidistat
The integral humidity sensor increases speed in proportion to relative humidity levels, saving energy and reducing noise. The sensor also reacts to small but rapid increases in humidity, even if the normal trigger threshold is not reached. This unique feature ensures adequate ventilation, even for the smallest wet-room. • Simple Plug-n-Play installation • Eliminates the need for additional controllers or sensors • Reacts to any rapid increases in relative humidity or relative humidity above 60% • Future proof – can be fitted after installation • Proportional Control • Self programming
Please call 0344 856 0590 for further availability information.
Image of Wireless Transmitter Controller Receiver Kit
Wireless Transmitter Controller Receiver Kit
• Manual boost • Adjustable overrun timer • Easy wire-less installation • Reduces installation time • Future proof - add more controllers at any time
Please call 0344 856 0590 for further availability information.
Image of CO2 + Temp Room Sensor (Sentinel)
CO2 + Temp Room Sensor (Sentinel)
HVAC temperature and carbon dioxide room sensor for ventilation control of residential areas, office areas and classrooms. Used with Sentinel in Proportional control mode. Sensor will monitor both CO2 and temperature levels between the set points, the Sentinel air extraction rate will follow the higher of the 2 outputs. 24V DC SELV. 0 - 2000ppm CO2 working range. 0 - 50°C Temperature working range. Auto-calibrating NDIR CO2 absorption sensor. Thin film platinum temperature sensor for high accuracy. Dimensions:100 x 84 x 25mm (H x W x D).
Please call 0344 856 0590 for further availability information.
Ventwise Temperature Sensor 6m
Temperature sensor for use with Ventwise Controller. 6 metre lead length
Please call 0344 856 0590 for further availability information.

 

Raadpleeg de tab Downloads voor technische informatie

 

 

Overview

Sentinel Multivent continuous mechanical extract ventilation, MEV is designed for the simultaneous ventilation of separate areas in the home or as a multipoint extraction system for a wide range of commercial applications. The units can be installed at any angle. Where the ambient air has a high humidity content condensate drains are provided.

In support of Sentinel Multivent, Vent-Axia offers:
• Practical advice on product selection and installation
• Guidance on solutions to meet legislation requirements
• Project management and site deliveries
• After sales support and maintenance information

The need to improve efficiency
Sentinel Multivent has been designed to meet the exacting demands of developers, installers and users offering advanced control options and easier installation and commissioning.
• Demand Control - enables precise ventilation rate, is set in 1% increments based on property size
• Integral LCD display allows the installer to select appropriate low, normal and boost speeds to meet demand
• Manual and automatic control options
• Integral adjustable overrun timer and delay on timer
• Plug-n-Play automatic sensor detection
• Switched live and SELV connections
• Dry Out setting – Option set at installation, Sentinel Multivent will run on boost for 1 week to assist in removing moisture
• Optional Wireless Control – up to 4 controllers on any one system
• Energy efficient EC/DC motors - 1/3 less energy lost to heat than a conventional AC motor
• Low Specific Fan Power (SFP) making it one of the most efficient products on the market

Legislation
• Meets Building Regulations Approved Document F (System 3)
• Recognised in SAP PCDB up to kitchen + 6 wet rooms
• Meets carbon footprint reduction targets
• Lowest SFP figures of any demand control MEV system

The need for better health
Removal of pollutants such as moisture, carbon dioxide and external fumes are all important factors in maintaining indoor air quality, helping to create a healthier living environment.
• The integral humidity sensor (Sentinel Multivent H) increases fan speed in proportion to relative humidity levels, saving energy and reducing noise
• The sensor also reacts to small but rapid increases in humidity, even if the normal trigger threshold is not reached. This unique feature ensures adequate ventilation, even for the smallest wet room
• Night time relative humidity increment setback feature suppresses nuisance tripping as humidity gradually increases with falling temperature
• Acoustically lined - low noise levels only 18.1 dB(A) @ 3m

SAP PCDB
In order to make the right choice, developers and contractors should refer to Building Regulations ADL1a, SAP 2012 and SAP PCDB. SAP PCDB was launched in June 2006 to reward innovative ventilation manufacturers by testing and listing energy efficient products that assist in helping developers meet their Target Emission Rates (TER). SAP is the underpinning methodology behind the Energy Performance Certificates and is used to demonstrate compliance with Building Regulations for Dwellings - Approved Document L (England and Wales), Section 6 (Scotland) and Approved Document F (Northern Ireland). SAP PCDB specifically relates to wholehouse ventilation systems and lists a number of Vent-Axia Mechanical Ventilation solutions which offer an improved SAP rating over and above the default for these product types.

Your Carbon Footprint
The Carbon Footprint is a measure of the amount of carbon dioxide (CO2) emitted through the burning of fossil fuels. From a residential and commercial building perspective, it is the amount of carbon generated when you consume a kilowatt of electricity. Reducing a building’s carbon footprint will ultimately reduce electricity bills and save money for every individual household or business. It will also help meet the UK target for the reduction of emissions, as well as allowing you to help the environment.

 

Technical

DIMENSIONS:

Dimensions (mm)

A B C D E F G H I J
340 72.5 25 15 360 214 310 260 150 85

 

Models

Image of Lo-Carbon Sentinel Multivent H
Lo-Carbon Sentinel Multivent H
Continuous running mechanical extract system with integral humidity sensor, designed for the simultaneous ventilation of separate ares in the home or as a multipoint extraction system for a wide range of commercial applications. The integral humidity sensor increases fan speed in proportion to relative humidity levels, saving energy and reducing noise.
Please call 0344 856 0590 for further availability information.
Image of Lo-Carbon Sentinel Multivent
Lo-Carbon Sentinel Multivent
Continuous running mechanical extract system, designed for the simultaneous ventilation of separate ares in the home or as a multipoint extraction system for a wide range of commercial applications.
Please call 0344 856 0590 for further availability information.
Image of Wireless Transmitter Controller Receiver Kit
Wireless Transmitter Controller Receiver Kit
• Manual boost • Adjustable overrun timer • Easy wire-less installation • Reduces installation time • Future proof - add more controllers at any time
Please call 0344 856 0590 for further availability information.

Accessories

Image of Ambient Response Humidity Sensor Lo-Carbon
Ambient Response Humidity Sensor Lo-Carbon
Designed specifically for the Lo-Carbon product range. The latest self programming electronic On/Off wall mounted humidity sensor which reacts to any rapid increase in humidity and temperature by switching a Vent-Axia fan ‘On’ for rapid removal of moisture laden air, in domestic bathrooms and kitchens. Night time RH increment setback feature suppresses nuisance ripping when the humidity level gradually rises as the temperature falls. Features & Benefits: Ambient operating temp range +5°C to +40°C. Changeover relay switch. DEMKO Approved. Dimensions: 87 x 87 x 33mm (H x W x D). Operating range: 30%-90% RH. Pullcord override and neon indicator. Will fit single gang box for surface mounting. Downloads Catalogue Pages
Please call 0344 856 0590 for further availability information.
Image of Air Quality Sensor (Sentinel)
Air Quality Sensor (Sentinel)
Automatically reacts to the deterioration of air quality, sensing tobacco smoke, smells and toilet odours to regulate mechanically ventilated areas, such as cinemas, pubs, clubs, restaurants, kitchens, toilets and conference rooms. The sensor switches when the air quality declines below an adjustable preset level. This is registered by a self-cleaning ceramic sensing head. The air quality sensor should not be used for the detection of combustible gases. Ambient operating temperature range 0°C to +50°C. MIN - MAX mode or direct Damper control. Dimensions:87 x 157 x 47mm (H xWxD) Surface mounted. 1 - 25 min O/R timer. Supply voltage 24V DC SELV.
Please call 0344 856 0590 for further availability information.
Image of Ecotronic Humidity Sensor (Sentinel)
Ecotronic Humidity Sensor (Sentinel)
Humidity Control is automatic and can be set to switch between 65 and 90%RH. An integral pullcord provides a manual override function if required. Can be wired for either ON/OFF or Trickle Boost operation. Set Point adjustable. Maximum switching load 1 amp inductive. Pullcord override indicator Ambient operating temperature 0°C to +40°C. Dimensions:87 x 87 x 33mm (H x W x D). Supply voltage 24V DC SELV. Humidity sensors should be sited approx. 100mm below ceiling level and not above cupboards, refer to siting details in fitting and wiring instructions supplied with product.
Please call 0344 856 0590 for further availability information.
Image of Vent-Axia Visionex PIR
Vent-Axia Visionex PIR

A wall or ceiling mounted movement detector for use with any domestic Vent-Axia mains voltage product. Also suitable for use with Vent-Axia T-Series controllers on ‘Auto’ setting and ITC controllers on sensor mode. Features & Benefits: Adjustable timer overrun (5-25 minutes). Ambient operating temperature range 0°C to +50°C. Designed to meet IP43. Double insulated. Fits any UK single gang mounting box. Internal use only. Maximum load: 600W inductive. Not suitable for use with lighting. No switched live required for internal rooms and toilets. Range of detection up to 10 metres. Supply voltage 220-240V/1/50Hz. Volt-free contacts. Downloads Catalogue Pages

Please call 0344 856 0590 for further availability information.
Image of Kinetic Integral Humidistat
Kinetic Integral Humidistat
The integral humidity sensor increases speed in proportion to relative humidity levels, saving energy and reducing noise. The sensor also reacts to small but rapid increases in humidity, even if the normal trigger threshold is not reached. This unique feature ensures adequate ventilation, even for the smallest wet-room. • Simple Plug-n-Play installation • Eliminates the need for additional controllers or sensors • Reacts to any rapid increases in relative humidity or relative humidity above 60% • Future proof – can be fitted after installation • Proportional Control • Self programming
Please call 0344 856 0590 for further availability information.
Image of Wireless Transmitter Controller Receiver Kit
Wireless Transmitter Controller Receiver Kit
• Manual boost • Adjustable overrun timer • Easy wire-less installation • Reduces installation time • Future proof - add more controllers at any time
Please call 0344 856 0590 for further availability information.
Image of CO2 + Temp Room Sensor (Sentinel)
CO2 + Temp Room Sensor (Sentinel)
HVAC temperature and carbon dioxide room sensor for ventilation control of residential areas, office areas and classrooms. Used with Sentinel in Proportional control mode. Sensor will monitor both CO2 and temperature levels between the set points, the Sentinel air extraction rate will follow the higher of the 2 outputs. 24V DC SELV. 0 - 2000ppm CO2 working range. 0 - 50°C Temperature working range. Auto-calibrating NDIR CO2 absorption sensor. Thin film platinum temperature sensor for high accuracy. Dimensions:100 x 84 x 25mm (H x W x D).
Please call 0344 856 0590 for further availability information.
Ventwise Temperature Sensor 6m
Temperature sensor for use with Ventwise Controller. 6 metre lead length
Please call 0344 856 0590 for further availability information.

Downloads