Lo-Carbon Sentinel Kinetic Plus

• Recognised in SAP Appendix Q • Ultra quiet • Horizontal duct option for space-saving installations • High airflow, ideal for student accommodation clusters • Unique folding filter for removal when access is restricted • Integrated digital controller for simple and accurate commissioning • Lightweight for easy installation • Plug and play controls; Humidistat, Ventwise, Wireless Remote • BMS connectivity • LS inputs (Light Switch) • Volt-free inputs • Self diagnosis for simplified fault finding • Adjustable delay On/delay Off timer • Summer bypass and frost protection

Select a product

Using the Vent-Axia LoWatt range can reduce electrical consumption, thus reducing the overall carbon footprint.

PRODUCT SPECIFICATION:

The Lo-Carbon Sentinel Kinetic Plus has 2 fully adjustable speeds and a purge setting - maximum. On the front of the unit is a digital controller that can be used to pre-set the speeds to any required air-flow within the performance range. The Sentinel Kinetic Plus models can be mounted vertically in a roof space or on a suitable wall. When mounted in an unheated area ducting should be insulated. Ducting can be attached to the unit horizonally, vertically or both. Left or right hand installation. The unit is supplied with duct spigots to outside on the right hand side. These can be reversed onsite by simply removing the control panel, rotating the unit 180 degrees and re-attaching the control panel. Horizontal and vertical spigots: The combination of spigot options allows installation in confined locations. If vertical and horizontal connection is required on the same outlet/inlet, additional spigots can be supplied. Condensate drain can be taken out through the back, bottom or front of the unit. Using the fittings supplied, the final condensate connection is made outside the unit and can be completed after installation.

DIMENSIONS:

Weight: 24kg

Image of Sentinel Kinetic Plus B
Sentinel Kinetic Plus B
High efficiency, Recognised in SAP Appendix Q, residential/light commercial Mechanical Ventilation with Heat Recovery unit. With Summer Bypass and Integral Humidistat.
Please call 0344 856 0590 for further availability information.
Image of Wireless enable kit
Wireless enable kit
The Wireless enable kit allows the Kinetic to be set to boost or purge from a remote wireless switch. One switch is supplied with the kit. Up to three additional switches may be linked to the wireless receiver.
Please call 0344 856 0590 for further availability information.
Image of Wireless Transmitter Controller Receiver Kit
Wireless Transmitter Controller Receiver Kit
• Manual boost • Adjustable overrun timer • Easy wire-less installation • Reduces installation time • Future proof - add more controllers at any time
Please call 0344 856 0590 for further availability information.
Image of Sentinel Kinetic Wired Remote Controller
Sentinel Kinetic Wired Remote Controller
The Kinetic Wired Remote Controller duplicates all the functions of the on-board controller allowing the unit to be commissioned, controlled and monitored remotely. The controller is supplied with 15 metres of four core cable fitted with an RJ11 plug for fitting to the Kinetic control pcb.
Please call 0344 856 0590 for further availability information.

Overview

Using the Vent-Axia LoWatt range can reduce electrical consumption, thus reducing the overall carbon footprint.

Technical

PRODUCT SPECIFICATION:

The Lo-Carbon Sentinel Kinetic Plus has 2 fully adjustable speeds and a purge setting - maximum. On the front of the unit is a digital controller that can be used to pre-set the speeds to any required air-flow within the performance range. The Sentinel Kinetic Plus models can be mounted vertically in a roof space or on a suitable wall. When mounted in an unheated area ducting should be insulated. Ducting can be attached to the unit horizonally, vertically or both. Left or right hand installation. The unit is supplied with duct spigots to outside on the right hand side. These can be reversed onsite by simply removing the control panel, rotating the unit 180 degrees and re-attaching the control panel. Horizontal and vertical spigots: The combination of spigot options allows installation in confined locations. If vertical and horizontal connection is required on the same outlet/inlet, additional spigots can be supplied. Condensate drain can be taken out through the back, bottom or front of the unit. Using the fittings supplied, the final condensate connection is made outside the unit and can be completed after installation.

DIMENSIONS:

Weight: 24kg

Models

Image of Sentinel Kinetic Plus B
Sentinel Kinetic Plus B
High efficiency, Recognised in SAP Appendix Q, residential/light commercial Mechanical Ventilation with Heat Recovery unit. With Summer Bypass and Integral Humidistat.
Please call 0344 856 0590 for further availability information.

Accessories

Image of Wireless enable kit
Wireless enable kit
The Wireless enable kit allows the Kinetic to be set to boost or purge from a remote wireless switch. One switch is supplied with the kit. Up to three additional switches may be linked to the wireless receiver.
Please call 0344 856 0590 for further availability information.
Image of Wireless Transmitter Controller Receiver Kit
Wireless Transmitter Controller Receiver Kit
• Manual boost • Adjustable overrun timer • Easy wire-less installation • Reduces installation time • Future proof - add more controllers at any time
Please call 0344 856 0590 for further availability information.
Image of Sentinel Kinetic Wired Remote Controller
Sentinel Kinetic Wired Remote Controller
The Kinetic Wired Remote Controller duplicates all the functions of the on-board controller allowing the unit to be commissioned, controlled and monitored remotely. The controller is supplied with 15 metres of four core cable fitted with an RJ11 plug for fitting to the Kinetic control pcb.
Please call 0344 856 0590 for further availability information.

Downloads