Lo-Carbon Sentinel Kinetic

• Recognised in SAP PCDB
• Ultra quiet
• Lightweight for easier installation
• Horizontal duct option for space-saving installations
• Fits within a 290mm deep kitchen cupboard (V and B Models)
• Integrated digital controller for simple and accurate commissioning
• Plug and play controls; Humidistat, Ventwise, Wireless Remote
• BMS connectivity
• LS inputs (Light Switch)
• Volt-free inputs
• Self diagnosis for simplified fault finding
• Adjustable delay On/delay Off timer

Select a product

The first of our new generation of MVHR systems incorporating a range of features. Small enough to fit in a kitchen cupboard with integrated digital controls for easy installation, the Lo-Carbon Sentinel Kinetic range is designed with developers, installers and specifiers in mind.

The Sentinel Kinetic range incorporates:

A wholehouse heat recovery system with up to 94% energy efficiency

An easily accessible heat recovery cube protected by two removable EU3 filters

Two Lo-Carbon Energy Saving EC/DC motorised fans ensures long life (typically over double the life of an AC motor) and lowest possible energy use

Fully insulated construction with built-in condensation drain connection

Specifically designed for new build construction with a high level of insulation

Easy Installation
The Sentinel Kinetic models can be mounted vertically in a roof space, hallway cupboard, kitchen or kitchen cupboard. When mounted in an unheated area ducting should be insulated. Ducting can be attached to the unit horizontally, vertically or both. Minimum internal depth of kitchen cupboard: V, B and BH models 290mm.

Integral Humidity sensor
The integral humidity sensor (models with H suffix) increases speed in proportion to relative humidity levels, saving energy and reducing noise.

The sensor also reacts to small but rapid increases in humidity, even if the normal trigger threshold is not reached. This unique feature ensures adequate ventilation, even for the smallest wet-room.

The night-time relative humidity setback feature suppresses nuisance tripping as humidity gradually increases with falling temperature.

Sentinel Control
The Sentinel controller is the most advanced system available, providing Demand Control Ventilation (DCV), minimising energy consumption and noise levels, and optimising ventilation performance. Sentinel controlled units may be set to operate fully automatically or with varying levels of manual intervention.

BMS (Building Management System)
There are two levels of BMS available: Basic Output and full Electronic BMS.

Basic Output provides a five volt output from the LED terminals on the controller. This output occurs whenever a message appears in the digital display, for example; 'Check Filters' or a fault code. The output can also be converted to volt-free with the addition of an optional Opto-Coupler.

Electronic BMS: A full range of two-way digital signals are available through the RJ11 connector on the control board. The BMS system provider will translate this signal to extract the desired data. Contact Vent-Axia to discuss your specific requirements.

LED Alarm
MVHR units are often installed in lofts or other locations where they are difficult to monitor. THe optional remote LED alarm illuminates when any message is visible in the MVHR unit display panel. The LED alarm can be installed in a convenient location within the dwelling allowing end users to see that the unit requires attention.

 
Image of Sentinel Kinetic V
Sentinel Kinetic V

High efficiency, compact, recognised in SAP PCDB, residential Mechanical Ventilation with Heat Recovery unit (non-summer bypass model)

Please call 0344 856 0590 for further availability information.
Image of Sentinel Kinetic B
Sentinel Kinetic B

High efficiency, compact, SAP PCDB eligable, residential Mechanical Ventilation with Heat Recovery unit. With Summer Bypass.

Please call 0344 856 0590 for further availability information.
Image of Sentinel Kinetic BH
Sentinel Kinetic BH
High efficiency, compact, SAP Appendix Q eligable, residential Mechanical Ventilation with Heat Recovery unit. With Summer Bypass and Integral Built-In Humidistat.
Please call 0344 856 0590 for further availability information.
Image of Sentinel Kinetic CW L
Sentinel Kinetic CW L

High efficiency, compact, SAP Appendix Q eligable, residential Mechanical Ventilation with Heat Recovery unit. Features Summer Bypass and Telescopic Cooker Hood with white painted fascia. Hood incorporates fire damper and thermal overheat trip. LEFT hand model (with ducts to atmosphere on the left of the unit).

Please call 0344 856 0590 for further availability information.
Image of Sentinel Kinetic CS L
Sentinel Kinetic CS L

High efficiency, compact, SAP Appendix Q eligable, residential Mechanical Ventilation with Heat Recovery unit. Features Summer Bypass and Telescopic Cooker Hood with brushed aluminium fascia. Hood incorporates fire damper and thermal overheat trip. LEFT hand model (with ducts to atmosphere on the left of the unit).

Please call 0344 856 0590 for further availability information.
Image of Sentinel Kinetic CW R
Sentinel Kinetic CW R

High efficiency, compact, SAP Appendix Q eligable, residential Mechanical Ventilation with Heat Recovery unit. Features Summer Bypass and Telescopic Cooker Hood with white painted fascia. Hood incorporates fire damper and thermal overheat trip. RIGHT hand model (with ducts to atmosphere on the right of the unit).

Please call 0344 856 0590 for further availability information.
Image of Sentinel Kinetic CS R
Sentinel Kinetic CS R

High efficiency, compact, SAP Appendix Q eligable, residential Mechanical Ventilation with Heat Recovery unit. Features Summer Bypass and Telescopic Cooker Hood with brushed aluminium fascia. Hood incorporates fire damper and thermal overheat trip. RIGHT hand model (with ducts to atmosphere on the right of the unit).

Please call 0344 856 0590 for further availability information.
Image of Lo-Carbon Sentinel Kinetic CWH L
Lo-Carbon Sentinel Kinetic CWH L
Compact and recognised in SAP Appendix Q, the Lo-Carbon Sentinel Kinetic CWH L is a highly efficient mechanical ventilation (with heat recovery) unit supplied with a White Cooker Hood. This model is supplied left handed. Please note that this unit cannot be handed on-site.
Please call 0344 856 0590 for further availability information.
Image of Lo-Carbon Sentinel Kinetic CSH L
Lo-Carbon Sentinel Kinetic CSH L
Compact and recognised in SAP Appendix Q, the Lo-Carbon Sentinel Kinetic CWH L is a highly efficient mechanical ventilation (with heat recovery) unit supplied with a Brushed Aluminium Cooker Hood. This model is supplied left handed. Please note that this unit cannot be handed on-site.
Please call 0344 856 0590 for further availability information.
Image of Lo-Carbon Sentinel Kinetic CWH R
Lo-Carbon Sentinel Kinetic CWH R
Compact and recognised in SAP Appendix Q, the Lo-Carbon Sentinel Kinetic CWH L is a highly efficient mechanical ventilation (with heat recovery) unit supplied with a White Cooker Hood. This model is supplied right handed. Please note that this unit cannot be handed on-site.
Please call 0344 856 0590 for further availability information.
Image of Lo-Carbon Sentinel Kinetic CSH R
Lo-Carbon Sentinel Kinetic CSH R
Compact and recognised in SAP Appendix Q, the Lo-Carbon Sentinel Kinetic CWH L is a highly efficient mechanical ventilation (with heat recovery) unit supplied with a Brush Aluminium Cooker Hood. This model is supplied right handed. Please note that this unit cannot be handed on-site.
Please call 0344 856 0590 for further availability information.
Image of Wireless enable kit
Wireless enable kit
The Wireless enable kit allows the Kinetic to be set to boost or purge from a remote wireless switch. One switch is supplied with the kit. Up to three additional switches may be linked to the wireless receiver.
Please call 0344 856 0590 for further availability information.
Image of Wireless Transmitter Controller Receiver Kit
Wireless Transmitter Controller Receiver Kit
• Manual boost • Adjustable overrun timer • Easy wire-less installation • Reduces installation time • Future proof - add more controllers at any time
Please call 0344 856 0590 for further availability information.
Image of Kinetic Integral Humidistat
Kinetic Integral Humidistat
The integral humidity sensor increases speed in proportion to relative humidity levels, saving energy and reducing noise. The sensor also reacts to small but rapid increases in humidity, even if the normal trigger threshold is not reached. This unique feature ensures adequate ventilation, even for the smallest wet-room. • Simple Plug-n-Play installation • Eliminates the need for additional controllers or sensors • Reacts to any rapid increases in relative humidity or relative humidity above 60% • Future proof – can be fitted after installation • Proportional Control • Self programming
Please call 0344 856 0590 for further availability information.
Image of Sentinel Kinetic Wired Remote Controller
Sentinel Kinetic Wired Remote Controller
The Kinetic Wired Remote Controller duplicates all the functions of the on-board controller allowing the unit to be commissioned, controlled and monitored remotely. The controller is supplied with 15 metres of four core cable fitted with an RJ11 plug for fitting to the Kinetic control pcb.
Please call 0344 856 0590 for further availability information.
Kinetic Vent Wise Controller
The award wining Vent Wise controller has been designed to fully automate a ventilation system. The unit can be used to switch the unit between trickle and boost speed. The controller saves energy by only switching when cooking is taking place or condensation is being generated. The current sensor detects when the power supply to an oven or hob is switched on. The temperature sensor detects the rise in temperature in the hot feed to a bath or shower. A combination of up to three sensors may be used with one controller This controller consists of a small pcb which is plugged onto the control board alongside the terminal connectors. This converts switches 1 to 3 into sensor inputs. A combination of up to three current and/or temperature sensors can then be connected.
Please call 0344 856 0590 for further availability information.
Ventwise Current Sensor 4m
Current sensor for use with Ventwise Controller. 4 metre lead length
Please call 0344 856 0590 for further availability information.
Ventwise Current Sensor 6m
Current sensor for use with Ventwise Controller. 6 metre lead length
Please call 0344 856 0590 for further availability information.
Ventwise Current Sensor 12m
Current sensor for use with Ventwise Controller. 12 metre lead length
Please call 0344 856 0590 for further availability information.
Ventwise Temperature Sensor 4m
Temperature sensor for use with Ventwise Controller. 4 metre lead length
Please call 0344 856 0590 for further availability information.
Ventwise Temperature Sensor 6m
Temperature sensor for use with Ventwise Controller. 6 metre lead length
Please call 0344 856 0590 for further availability information.
Ventwise Temperature Sensor 12m
Temperature sensor for use with Ventwise Controller. 12 metre lead length
Please call 0344 856 0590 for further availability information.
Image of Spare Low Energy 9W Light Bulb
Spare Low Energy 9W Light Bulb

Spare 9W low energy light bulb suitbale for mains voltage Lo-Carbon Sentinel Kinetic Cooker Hood models.

Please call 0344 856 0590 for further availability information.
Image of LED Indicator
LED Indicator
Compatible with the Sentinel Kinetic range, the LED Indicator illuminates when the MVHR unit requires a filter check or if the unit has a fault. Supplied with 15 metres of cable. 85 x 85 x 10mm (H x W x D)
Please call 0344 856 0590 for further availability information.

Overview

The first of our new generation of MVHR systems incorporating a range of features. Small enough to fit in a kitchen cupboard with integrated digital controls for easy installation, the Lo-Carbon Sentinel Kinetic range is designed with developers, installers and specifiers in mind.

The Sentinel Kinetic range incorporates:

A wholehouse heat recovery system with up to 94% energy efficiency

An easily accessible heat recovery cube protected by two removable EU3 filters

Two Lo-Carbon Energy Saving EC/DC motorised fans ensures long life (typically over double the life of an AC motor) and lowest possible energy use

Fully insulated construction with built-in condensation drain connection

Specifically designed for new build construction with a high level of insulation

Easy Installation
The Sentinel Kinetic models can be mounted vertically in a roof space, hallway cupboard, kitchen or kitchen cupboard. When mounted in an unheated area ducting should be insulated. Ducting can be attached to the unit horizontally, vertically or both. Minimum internal depth of kitchen cupboard: V, B and BH models 290mm.

Integral Humidity sensor
The integral humidity sensor (models with H suffix) increases speed in proportion to relative humidity levels, saving energy and reducing noise.

The sensor also reacts to small but rapid increases in humidity, even if the normal trigger threshold is not reached. This unique feature ensures adequate ventilation, even for the smallest wet-room.

The night-time relative humidity setback feature suppresses nuisance tripping as humidity gradually increases with falling temperature.

Sentinel Control
The Sentinel controller is the most advanced system available, providing Demand Control Ventilation (DCV), minimising energy consumption and noise levels, and optimising ventilation performance. Sentinel controlled units may be set to operate fully automatically or with varying levels of manual intervention.

BMS (Building Management System)
There are two levels of BMS available: Basic Output and full Electronic BMS.

Basic Output provides a five volt output from the LED terminals on the controller. This output occurs whenever a message appears in the digital display, for example; 'Check Filters' or a fault code. The output can also be converted to volt-free with the addition of an optional Opto-Coupler.

Electronic BMS: A full range of two-way digital signals are available through the RJ11 connector on the control board. The BMS system provider will translate this signal to extract the desired data. Contact Vent-Axia to discuss your specific requirements.

LED Alarm
MVHR units are often installed in lofts or other locations where they are difficult to monitor. THe optional remote LED alarm illuminates when any message is visible in the MVHR unit display panel. The LED alarm can be installed in a convenient location within the dwelling allowing end users to see that the unit requires attention.

Technical

 

Models

Image of Sentinel Kinetic V
Sentinel Kinetic V

High efficiency, compact, recognised in SAP PCDB, residential Mechanical Ventilation with Heat Recovery unit (non-summer bypass model)

Please call 0344 856 0590 for further availability information.
Image of Sentinel Kinetic B
Sentinel Kinetic B

High efficiency, compact, SAP PCDB eligable, residential Mechanical Ventilation with Heat Recovery unit. With Summer Bypass.

Please call 0344 856 0590 for further availability information.
Image of Sentinel Kinetic BH
Sentinel Kinetic BH
High efficiency, compact, SAP Appendix Q eligable, residential Mechanical Ventilation with Heat Recovery unit. With Summer Bypass and Integral Built-In Humidistat.
Please call 0344 856 0590 for further availability information.
Image of Sentinel Kinetic CW L
Sentinel Kinetic CW L

High efficiency, compact, SAP Appendix Q eligable, residential Mechanical Ventilation with Heat Recovery unit. Features Summer Bypass and Telescopic Cooker Hood with white painted fascia. Hood incorporates fire damper and thermal overheat trip. LEFT hand model (with ducts to atmosphere on the left of the unit).

Please call 0344 856 0590 for further availability information.
Image of Sentinel Kinetic CS L
Sentinel Kinetic CS L

High efficiency, compact, SAP Appendix Q eligable, residential Mechanical Ventilation with Heat Recovery unit. Features Summer Bypass and Telescopic Cooker Hood with brushed aluminium fascia. Hood incorporates fire damper and thermal overheat trip. LEFT hand model (with ducts to atmosphere on the left of the unit).

Please call 0344 856 0590 for further availability information.
Image of Sentinel Kinetic CW R
Sentinel Kinetic CW R

High efficiency, compact, SAP Appendix Q eligable, residential Mechanical Ventilation with Heat Recovery unit. Features Summer Bypass and Telescopic Cooker Hood with white painted fascia. Hood incorporates fire damper and thermal overheat trip. RIGHT hand model (with ducts to atmosphere on the right of the unit).

Please call 0344 856 0590 for further availability information.
Image of Sentinel Kinetic CS R
Sentinel Kinetic CS R

High efficiency, compact, SAP Appendix Q eligable, residential Mechanical Ventilation with Heat Recovery unit. Features Summer Bypass and Telescopic Cooker Hood with brushed aluminium fascia. Hood incorporates fire damper and thermal overheat trip. RIGHT hand model (with ducts to atmosphere on the right of the unit).

Please call 0344 856 0590 for further availability information.
Image of Lo-Carbon Sentinel Kinetic CWH L
Lo-Carbon Sentinel Kinetic CWH L
Compact and recognised in SAP Appendix Q, the Lo-Carbon Sentinel Kinetic CWH L is a highly efficient mechanical ventilation (with heat recovery) unit supplied with a White Cooker Hood. This model is supplied left handed. Please note that this unit cannot be handed on-site.
Please call 0344 856 0590 for further availability information.
Image of Lo-Carbon Sentinel Kinetic CSH L
Lo-Carbon Sentinel Kinetic CSH L
Compact and recognised in SAP Appendix Q, the Lo-Carbon Sentinel Kinetic CWH L is a highly efficient mechanical ventilation (with heat recovery) unit supplied with a Brushed Aluminium Cooker Hood. This model is supplied left handed. Please note that this unit cannot be handed on-site.
Please call 0344 856 0590 for further availability information.
Image of Lo-Carbon Sentinel Kinetic CWH R
Lo-Carbon Sentinel Kinetic CWH R
Compact and recognised in SAP Appendix Q, the Lo-Carbon Sentinel Kinetic CWH L is a highly efficient mechanical ventilation (with heat recovery) unit supplied with a White Cooker Hood. This model is supplied right handed. Please note that this unit cannot be handed on-site.
Please call 0344 856 0590 for further availability information.
Image of Lo-Carbon Sentinel Kinetic CSH R
Lo-Carbon Sentinel Kinetic CSH R
Compact and recognised in SAP Appendix Q, the Lo-Carbon Sentinel Kinetic CWH L is a highly efficient mechanical ventilation (with heat recovery) unit supplied with a Brush Aluminium Cooker Hood. This model is supplied right handed. Please note that this unit cannot be handed on-site.
Please call 0344 856 0590 for further availability information.

Accessories

Image of Wireless enable kit
Wireless enable kit
The Wireless enable kit allows the Kinetic to be set to boost or purge from a remote wireless switch. One switch is supplied with the kit. Up to three additional switches may be linked to the wireless receiver.
Please call 0344 856 0590 for further availability information.
Image of Wireless Transmitter Controller Receiver Kit
Wireless Transmitter Controller Receiver Kit
• Manual boost • Adjustable overrun timer • Easy wire-less installation • Reduces installation time • Future proof - add more controllers at any time
Please call 0344 856 0590 for further availability information.
Image of Kinetic Integral Humidistat
Kinetic Integral Humidistat
The integral humidity sensor increases speed in proportion to relative humidity levels, saving energy and reducing noise. The sensor also reacts to small but rapid increases in humidity, even if the normal trigger threshold is not reached. This unique feature ensures adequate ventilation, even for the smallest wet-room. • Simple Plug-n-Play installation • Eliminates the need for additional controllers or sensors • Reacts to any rapid increases in relative humidity or relative humidity above 60% • Future proof – can be fitted after installation • Proportional Control • Self programming
Please call 0344 856 0590 for further availability information.
Image of Sentinel Kinetic Wired Remote Controller
Sentinel Kinetic Wired Remote Controller
The Kinetic Wired Remote Controller duplicates all the functions of the on-board controller allowing the unit to be commissioned, controlled and monitored remotely. The controller is supplied with 15 metres of four core cable fitted with an RJ11 plug for fitting to the Kinetic control pcb.
Please call 0344 856 0590 for further availability information.
Kinetic Vent Wise Controller
The award wining Vent Wise controller has been designed to fully automate a ventilation system. The unit can be used to switch the unit between trickle and boost speed. The controller saves energy by only switching when cooking is taking place or condensation is being generated. The current sensor detects when the power supply to an oven or hob is switched on. The temperature sensor detects the rise in temperature in the hot feed to a bath or shower. A combination of up to three sensors may be used with one controller This controller consists of a small pcb which is plugged onto the control board alongside the terminal connectors. This converts switches 1 to 3 into sensor inputs. A combination of up to three current and/or temperature sensors can then be connected.
Please call 0344 856 0590 for further availability information.
Ventwise Current Sensor 4m
Current sensor for use with Ventwise Controller. 4 metre lead length
Please call 0344 856 0590 for further availability information.
Ventwise Current Sensor 6m
Current sensor for use with Ventwise Controller. 6 metre lead length
Please call 0344 856 0590 for further availability information.
Ventwise Current Sensor 12m
Current sensor for use with Ventwise Controller. 12 metre lead length
Please call 0344 856 0590 for further availability information.
Ventwise Temperature Sensor 4m
Temperature sensor for use with Ventwise Controller. 4 metre lead length
Please call 0344 856 0590 for further availability information.
Ventwise Temperature Sensor 6m
Temperature sensor for use with Ventwise Controller. 6 metre lead length
Please call 0344 856 0590 for further availability information.
Ventwise Temperature Sensor 12m
Temperature sensor for use with Ventwise Controller. 12 metre lead length
Please call 0344 856 0590 for further availability information.
Image of Spare Low Energy 9W Light Bulb
Spare Low Energy 9W Light Bulb

Spare 9W low energy light bulb suitbale for mains voltage Lo-Carbon Sentinel Kinetic Cooker Hood models.

Please call 0344 856 0590 for further availability information.
Image of LED Indicator
LED Indicator
Compatible with the Sentinel Kinetic range, the LED Indicator illuminates when the MVHR unit requires a filter check or if the unit has a fault. Supplied with 15 metres of cable. 85 x 85 x 10mm (H x W x D)
Please call 0344 856 0590 for further availability information.

Downloads