Lo-carbon_PoziDry_Pro
PoziDry Pro
HVN Finalist
Lo-carbon_PoziDry_Pro

Lo-Carbon PoziDry Pro

• Anti-Vibration joist mounting legs as standard
• Fully adjustable between 11l/s - 60l/s
• Smart SenseTM technology offers simple control and data logging
• Uses latest Lo-Carbon motor technology for low running costs
• Ultra-low sound level
• Complete with new and improved ceiling diffuser, flexible duct and G4 filters with
F7 upgrade option (PM2.5 Filtration)
• Standard 5 year warranty
• Up to 5 year maintenance free filter
• IPX2 rated
• BBA Approved

Select a product

BBA approved PoziDry Pro™ is simple to install and commission, yet highly effective at reducing condensation and mould.

Landlord
The perfect solution for hard to cure mould and condensation properties. Improving indoor air quality and preventing moisture build-up within the home. Backed up with our 5 year maintenance free guarantee.

Contractor
Tried and tested Smart Sense™ technology makes installation fast. Ready to install out of the box, with an easy carry handle to lift it though the loft hatch. A hanging kit and adjustable legs and feet are included for full installation options.

Resident
PoziDry Pro™ improves indoor air quality and quickly eradicates conditions that lead to mould growth, reducing the risk of health issues in the home. The unit is unobtrusive, near silent running and has low operating costs.

Positive Input Ventilation
Designed to prevent and treat condensation and mould quickly. The BBA approved PoziDry ProTM is the perfect solution for general refurbishment, as its discreet, easy to install and almost silent running. Lo-Carbon PoziDry ProTM offers a quick and simple solution. A loft mounted
positive input fan draws fresh air from the loft, filters it and gently feeds it into the dwelling via a ceiling mounted diffuser. Clean, fresh filtered air with a lower moisture content dilutes, displaces and replaces, contaminated and moisture laden air.

Features:

  • Anti-vibration Legs offer flexibility when fitting and guarantee silent running.   
  • Flexible Feet – allow the PoziDry Pro™ to be installed across two joists or along joist offering simple easy installation
  • Moulded Handle – Makes carrying PoziDry Pro™ safe and simple. The handle also allows you to change the pitch of the PIV if a hanging kit is used
  • Filters- PoziDry Pro™ is unique in offering F7 filters (available separately) which filter down to PM2.5 which includes harmful diesel particulates
  • Smart Efficient Heater – The efficient heater is mounted on the unit increasing the temperature of the air entering the habitable areas by 4°C
  • Smart Sense™ Technology – Easy setup and smart data logging capabilities all accessed via the intuitive 3 button menu.

Installation
The Lo-Carbon PoziDry ProTM is uniquely flexible in its installation methods, high sided anti vibration legs and a hanging kit both come as standard, allowing the PoziDry ProTM to be installed quickly in any sized loft. The easy carry handle incorporated into the body makes carrying the unit easy and safe; especially useful when lifting the unit through loft hatches. 

The unit is supplied with a purpose designed diffuser to be located over the stairwell of a conventional dwelling, in the main hall of a bungalow, in the landing or hallway. The 4 -point contact easy fit technology allows fast and repeatable ‘drill free’ installation.
 Using Smart SenseTM technology the unit is easily set to the appropriate speed at installation based on the size of the dwelling. Natural leakage points that are present in all dwellings, as well as purpose provided exhaust points enhances the air change. En-suites and utility areas should
be serviced by continuous mechanical extract ventilation.

The PoziDry ProTM can also be set to Radon mode in properties that are affected by high radon gas levels. The unit will run continuously to ensure the constant supply of good indoor air to protect residents from harmful gases.

Performance

With a lightweight construction, the Lo-Carbon PoziDry ProTM features a specially developed Lo-Carbon DC fan/motor arrangement which runs quietly and delivers incredibly low running costs. The Lo-Carbon PoziDry ProTM uses a sensor to monitor the temperature in the loft, automatically
adjusting the air volume when necessary. Additionally, resident comfort can be assured through an option to change the temperature at which the unit increases or decreases airflow. The unit will continuously ventilate silently in the background whilst in ‘Trickle’ mode. Once the unit automatically senses
excess heat being lost into the loft the airflow will increase to ‘Energy Recovery’ mode to recover heat that would otherwise be lost through the roof. During summer months should the loft exceed 27°C (adjustable) the unit will enter ‘stand-by’ mode in order stop the circulation of warm air allowing for a more comfortable living environment. PoziDry ProTM Heater models automatically turn on the 500W heater to boost air temperature by 10°C during colder months.

Filter
Standard filters supplied with the PoziDry ProTM are G4 (PM10 filtration) which filter out many every day pollutants such as pollen & dust. Optional F7 filters are available (PM2.5 Filtration) removing tobacco smoke, diesel particulates, spores and a number of bacteria.

Data Logger
Smart SenseTM technology allows the unit to record how long it has been running in each of its speeds. It also measures the number of days the product has been switched on to provide precise running information. Smart SenseTM technology can also record the duration of heater activity and energy used. The Data Logger records the life time of a filter and indicates when a filter needs to be changed.

Speed Control

Smart SenseTM technology makes speed selection easy. Once house size is selected based on number of bedrooms, PoziDry ProTM automatically selects the correct Trickle and Energy Recovery speeds. Should you need to adjust speed manually this can be done easily. The Smart SenseTM
interface can also be locked ensuring that settings are not tampered with.

Heater
The 500W heater is installed on the unit to reduce heat loss through the ducting. This means more heat enters the habitable areas of the house. Smart SenseTM controls allow the PoziDry ProTM to be adjusted fully when the heater is activated making it adaptable for all lifestyles.

Air Replacement Grille Set*
For air replacement through doors. Consists of a two-piece telescopic set, which fits unobtrusively on either side of the door panel. Minimum fixing thickness 30mm. Plastic. Dimensions: 454 x 90mm.
*Only required if there is not a 10mm undercut on the internal doors.

Mounting Options
PoziDry ProTM comes as standard with both high sided anti vibration legs and a hanging kit. The legs are designed to mount between standard joist widths between 400-600mm centres. Clip and fit connections allow for easy installation.

Motor
The electronically controlled DC motor is manufactured with long life ball bearings and is fitted with Standard Thermal Overload Protection (S.T.O.P.). Suitable for ambient operating temperatures of -25°C to +40°C.
For complete peace of mind, the Vent-Axia Lo-Carbon PoziDry ProTM is backed by a 5 year warranty.

Discreet Diffuser

The NEW discreet circular diffuser is easily installed, fitted and maintained. Easy fix features it can be installed against uneven ceiling surfaces with no gaps. Its low profile and aesthetically pleasing design has been developed with tenant acceptability in mind. Our Smart AirTM technology reduces air supply noise while increasing performance by 10%. The easy clip blanking plates help to control airflow into the property.

PERFORMANCE:

PoziDry Pro™ - the simple solution for improving indoor air quality

  Input Performance (l/s) - FID Power Consumption (Watts)
Bedroom Trickle Normal Trickle Normal
1 13 25 3.8 5.5
2 17 31 4.2 8
3 21 38 4.8 8.5
4 25 44 5.2 11
5 29 50 6.5 14
Adjustable 10-59 11-60 Up to  

DIMENSIONS:

A* B C D ØE F** G ØH
400-600 300-650 364 310 200 200 300 220
*Variable to allow for adapting product height. **Variable to adapt to differing joist widths. Height will vary as A dimension changes
PoziDry Pro,
Image of PoziDry Pro
PoziDry Pro

Positive input ventilation for whole house mould and condensation control. Smart SenseTM control allows quick and accurate set up. Variable speed control allows the unit to be effective in a property up to 150m2. Automatic summer shut off stops warm air coming back into the property. Wireless control ready.

Stock Ref. No: 476310
Price £559.85 (excl VAT)
Image of PoziDry Pro with Heater
PoziDry Pro with Heater

Positive input ventilation with heater for whole house mould and condensation control. Smart SenseTM control allows quick and accurate set up. Variable speed control allows the unit to be effective in a property up to 150m2. Automatic summer shut off stops warm air coming back into the property. Wireless control ready.

Stock Ref. No: 476311
Price £598.43 (excl VAT)
Image of PoziDry Pro FD with Heater (Multi-storey Compliant)
PoziDry Pro FD with Heater (Multi-storey Compliant)

Positive input ventilation with heater and fire damper for whole house mould and condensation control. Smart SenseTM control allows quick and accurate set up. Variable speed control allows the unit to be effective in a property up to 150m2. Automatic summer shut off stops warm air coming back into the property. Fire Damper model can be wired into a fire alarm that has an integral relay, cutting off power to the unit if smoke is detected. It also comes with intumescent fire protective ducting and a fire stopping diffuser rated up to 1 hour.

Stock Ref. No: 476312
Price £660.37 (excl VAT)
Twin Spigot Kit

An additional kit to allow an extra circular diffuser to be installed near the PoziDry unit.

Stock Ref. No: 449071
Price £83.36 (excl VAT)
F7 Filter Set

Offers additional filtration removing harmful particulates down to PM 2.5

Stock Ref. No: 476401
Price £66.87 (excl VAT)
This Model no longer available
G4 Filter

Up to 5 years maintenance free G4 filter set. 

Stock Ref. No: 477629
Price £58.84 (excl VAT)
Diffuser
Stock Ref. No: 478228
Price £61.31 (excl VAT)

 

Raadpleeg de tab Downloads voor technische informatie

 

 

ESTIMATED RUNNING COSTS

Calculate estimated running costs for this product using the tool below.
For average costs, leave the default values in place or enter your own figures in the boxes to recalculate.
Where a product has multi speeds, a typical installation has been used for the below calculations.


pence
(Your current electricity cost in pence per hour. This will be listed on your electric bill)
hours
(The average number of hours per day fan to run in Trickle mode)
hours
(The average number of hours per day fan to run in Boost mode)

Based on the inputted figures, estimated running costs would be:

Overview

BBA approved PoziDry Pro™ is simple to install and commission, yet highly effective at reducing condensation and mould.

Landlord
The perfect solution for hard to cure mould and condensation properties. Improving indoor air quality and preventing moisture build-up within the home. Backed up with our 5 year maintenance free guarantee.

Contractor
Tried and tested Smart Sense™ technology makes installation fast. Ready to install out of the box, with an easy carry handle to lift it though the loft hatch. A hanging kit and adjustable legs and feet are included for full installation options.

Resident
PoziDry Pro™ improves indoor air quality and quickly eradicates conditions that lead to mould growth, reducing the risk of health issues in the home. The unit is unobtrusive, near silent running and has low operating costs.

Positive Input Ventilation
Designed to prevent and treat condensation and mould quickly. The BBA approved PoziDry ProTM is the perfect solution for general refurbishment, as its discreet, easy to install and almost silent running. Lo-Carbon PoziDry ProTM offers a quick and simple solution. A loft mounted
positive input fan draws fresh air from the loft, filters it and gently feeds it into the dwelling via a ceiling mounted diffuser. Clean, fresh filtered air with a lower moisture content dilutes, displaces and replaces, contaminated and moisture laden air.

Features:

  • Anti-vibration Legs offer flexibility when fitting and guarantee silent running.   
  • Flexible Feet – allow the PoziDry Pro™ to be installed across two joists or along joist offering simple easy installation
  • Moulded Handle – Makes carrying PoziDry Pro™ safe and simple. The handle also allows you to change the pitch of the PIV if a hanging kit is used
  • Filters- PoziDry Pro™ is unique in offering F7 filters (available separately) which filter down to PM2.5 which includes harmful diesel particulates
  • Smart Efficient Heater – The efficient heater is mounted on the unit increasing the temperature of the air entering the habitable areas by 4°C
  • Smart Sense™ Technology – Easy setup and smart data logging capabilities all accessed via the intuitive 3 button menu.

Installation
The Lo-Carbon PoziDry ProTM is uniquely flexible in its installation methods, high sided anti vibration legs and a hanging kit both come as standard, allowing the PoziDry ProTM to be installed quickly in any sized loft. The easy carry handle incorporated into the body makes carrying the unit easy and safe; especially useful when lifting the unit through loft hatches. 

The unit is supplied with a purpose designed diffuser to be located over the stairwell of a conventional dwelling, in the main hall of a bungalow, in the landing or hallway. The 4 -point contact easy fit technology allows fast and repeatable ‘drill free’ installation.
 Using Smart SenseTM technology the unit is easily set to the appropriate speed at installation based on the size of the dwelling. Natural leakage points that are present in all dwellings, as well as purpose provided exhaust points enhances the air change. En-suites and utility areas should
be serviced by continuous mechanical extract ventilation.

The PoziDry ProTM can also be set to Radon mode in properties that are affected by high radon gas levels. The unit will run continuously to ensure the constant supply of good indoor air to protect residents from harmful gases.

Performance

With a lightweight construction, the Lo-Carbon PoziDry ProTM features a specially developed Lo-Carbon DC fan/motor arrangement which runs quietly and delivers incredibly low running costs. The Lo-Carbon PoziDry ProTM uses a sensor to monitor the temperature in the loft, automatically
adjusting the air volume when necessary. Additionally, resident comfort can be assured through an option to change the temperature at which the unit increases or decreases airflow. The unit will continuously ventilate silently in the background whilst in ‘Trickle’ mode. Once the unit automatically senses
excess heat being lost into the loft the airflow will increase to ‘Energy Recovery’ mode to recover heat that would otherwise be lost through the roof. During summer months should the loft exceed 27°C (adjustable) the unit will enter ‘stand-by’ mode in order stop the circulation of warm air allowing for a more comfortable living environment. PoziDry ProTM Heater models automatically turn on the 500W heater to boost air temperature by 10°C during colder months.

Filter
Standard filters supplied with the PoziDry ProTM are G4 (PM10 filtration) which filter out many every day pollutants such as pollen & dust. Optional F7 filters are available (PM2.5 Filtration) removing tobacco smoke, diesel particulates, spores and a number of bacteria.

Data Logger
Smart SenseTM technology allows the unit to record how long it has been running in each of its speeds. It also measures the number of days the product has been switched on to provide precise running information. Smart SenseTM technology can also record the duration of heater activity and energy used. The Data Logger records the life time of a filter and indicates when a filter needs to be changed.

Speed Control

Smart SenseTM technology makes speed selection easy. Once house size is selected based on number of bedrooms, PoziDry ProTM automatically selects the correct Trickle and Energy Recovery speeds. Should you need to adjust speed manually this can be done easily. The Smart SenseTM
interface can also be locked ensuring that settings are not tampered with.

Heater
The 500W heater is installed on the unit to reduce heat loss through the ducting. This means more heat enters the habitable areas of the house. Smart SenseTM controls allow the PoziDry ProTM to be adjusted fully when the heater is activated making it adaptable for all lifestyles.

Air Replacement Grille Set*
For air replacement through doors. Consists of a two-piece telescopic set, which fits unobtrusively on either side of the door panel. Minimum fixing thickness 30mm. Plastic. Dimensions: 454 x 90mm.
*Only required if there is not a 10mm undercut on the internal doors.

Mounting Options
PoziDry ProTM comes as standard with both high sided anti vibration legs and a hanging kit. The legs are designed to mount between standard joist widths between 400-600mm centres. Clip and fit connections allow for easy installation.

Motor
The electronically controlled DC motor is manufactured with long life ball bearings and is fitted with Standard Thermal Overload Protection (S.T.O.P.). Suitable for ambient operating temperatures of -25°C to +40°C.
For complete peace of mind, the Vent-Axia Lo-Carbon PoziDry ProTM is backed by a 5 year warranty.

Discreet Diffuser

The NEW discreet circular diffuser is easily installed, fitted and maintained. Easy fix features it can be installed against uneven ceiling surfaces with no gaps. Its low profile and aesthetically pleasing design has been developed with tenant acceptability in mind. Our Smart AirTM technology reduces air supply noise while increasing performance by 10%. The easy clip blanking plates help to control airflow into the property.

Technical

PERFORMANCE:

PoziDry Pro™ - the simple solution for improving indoor air quality

  Input Performance (l/s) - FID Power Consumption (Watts)
Bedroom Trickle Normal Trickle Normal
1 13 25 3.8 5.5
2 17 31 4.2 8
3 21 38 4.8 8.5
4 25 44 5.2 11
5 29 50 6.5 14
Adjustable 10-59 11-60 Up to  

DIMENSIONS:

A* B C D ØE F** G ØH
400-600 300-650 364 310 200 200 300 220
*Variable to allow for adapting product height. **Variable to adapt to differing joist widths. Height will vary as A dimension changes
PoziDry Pro,

Models

Image of PoziDry Pro
PoziDry Pro

Positive input ventilation for whole house mould and condensation control. Smart SenseTM control allows quick and accurate set up. Variable speed control allows the unit to be effective in a property up to 150m2. Automatic summer shut off stops warm air coming back into the property. Wireless control ready.

Stock Ref. No: 476310
Price £559.85 (excl VAT)
Image of PoziDry Pro with Heater
PoziDry Pro with Heater

Positive input ventilation with heater for whole house mould and condensation control. Smart SenseTM control allows quick and accurate set up. Variable speed control allows the unit to be effective in a property up to 150m2. Automatic summer shut off stops warm air coming back into the property. Wireless control ready.

Stock Ref. No: 476311
Price £598.43 (excl VAT)
Image of PoziDry Pro FD with Heater (Multi-storey Compliant)
PoziDry Pro FD with Heater (Multi-storey Compliant)

Positive input ventilation with heater and fire damper for whole house mould and condensation control. Smart SenseTM control allows quick and accurate set up. Variable speed control allows the unit to be effective in a property up to 150m2. Automatic summer shut off stops warm air coming back into the property. Fire Damper model can be wired into a fire alarm that has an integral relay, cutting off power to the unit if smoke is detected. It also comes with intumescent fire protective ducting and a fire stopping diffuser rated up to 1 hour.

Stock Ref. No: 476312
Price £660.37 (excl VAT)

Accessories

Twin Spigot Kit

An additional kit to allow an extra circular diffuser to be installed near the PoziDry unit.

Stock Ref. No: 449071
Price £83.36 (excl VAT)
F7 Filter Set

Offers additional filtration removing harmful particulates down to PM 2.5

Stock Ref. No: 476401
Price £66.87 (excl VAT)
This Model no longer available
G4 Filter

Up to 5 years maintenance free G4 filter set. 

Stock Ref. No: 477629
Price £58.84 (excl VAT)
Diffuser
Stock Ref. No: 478228
Price £61.31 (excl VAT)

Downloads