Lo-Carbon Kinetic Plus E

 

Light weight for easy installation
Easy access filters
External condensate connection
Compatible with a range of controls: PIR, Humidistat
Horizontal spigot option
Up to 94% heat recovery
Quiet operation
Manufactured in the UK
Switched live inputs (Light switch control)
 

Select a product

A wholehouse heat recovery system with up to 94% energy efficiency. An easily accessible heat recovery cube protected by two removable EU3 filters. Two Lo-Carbon Energy Saving EC/DC fans ensure long life (typically over double the life of AC motors) and lowest possible energy use. Fully insulated construction with built-in condensation drain.Lo-Carbon Kinetic Plus E meets the latest requirements of the Building Regulations Approved Document F for wholehouse system ventilation. The Lo-Carbon Kinetic Plus E model has two adjustable speeds, normal and boost. On the front of the unit is the controller that can be used to preset the speeds to any required performance, up to 111l/s (400m3/hr) 150Pa. Offering ‘Close Control’ to prevent over ventilating. Acoustically lined - low noise levels from only 20dB(A) @ 3m.Left or Right Hand InstallationUnits are supplied as RH version with duct spigots to outside on the right hand side. These can be reversed onsite by simply removing the control panel, rotating the unit 180 degrees and reattaching the control panel.Horizontal and Vertical SpigotsThe combination of spigot options allows installation in confined locations. If vertical and horizontal connections are required on the same outlet/inlet, additional spigots can be supplied.Filter CheckAn LED on the control panel illuminates at 6 month intervals to remind users to check and clean the filters.Frost ProtectionThe Kinetic E range benefits from an automatic frost protection system, effective down to -20°C, which manages the airflows to prevent the heat recovery cell freezing in very cold weather, while at the same time maintaining ventilation.Control OptionsThere are two LS (Switched Live) inputs allowing the unit to be connected to a number of sensors and controllers such as Ventwise, Timespan, Ambient Response Humidistat. One of the LS connections also benefits from a ‘Delay-On’ feature which prevents the unit boosting unnecessarily.

Image of Lo-Carbon Sentinel Kinetic Plus E
Lo-Carbon Sentinel Kinetic Plus E
High efficiency, SAP Appendix Q eligable, residential Mechanical Ventilation with Heat Recovery unit
Please call 0344 856 0590 for further availability information.
Image of Filter Pack Kinetic Plus Replacement Standard Filters
Filter Pack Kinetic Plus Replacement Standard Filters
Replacement filter set comprising 2 filters for the Kinetic Plus unit. Installation instructions included.
Please call 0344 856 0590 for further availability information.
Image of Filter: Kinetic Plus M5 Pollen Filter
Filter: Kinetic Plus M5 Pollen Filter
Replacement filter comprising one supply filter for the Kinetic Plus unit. Pack contains one M5 Pollen filter. M5 provides increased performance filtering out most pollens. Installation instructions included.
Please call 0344 856 0590 for further availability information.

Overview

A wholehouse heat recovery system with up to 94% energy efficiency. An easily accessible heat recovery cube protected by two removable EU3 filters. Two Lo-Carbon Energy Saving EC/DC fans ensure long life (typically over double the life of AC motors) and lowest possible energy use. Fully insulated construction with built-in condensation drain.Lo-Carbon Kinetic Plus E meets the latest requirements of the Building Regulations Approved Document F for wholehouse system ventilation. The Lo-Carbon Kinetic Plus E model has two adjustable speeds, normal and boost. On the front of the unit is the controller that can be used to preset the speeds to any required performance, up to 111l/s (400m3/hr) 150Pa. Offering ‘Close Control’ to prevent over ventilating. Acoustically lined - low noise levels from only 20dB(A) @ 3m.Left or Right Hand InstallationUnits are supplied as RH version with duct spigots to outside on the right hand side. These can be reversed onsite by simply removing the control panel, rotating the unit 180 degrees and reattaching the control panel.Horizontal and Vertical SpigotsThe combination of spigot options allows installation in confined locations. If vertical and horizontal connections are required on the same outlet/inlet, additional spigots can be supplied.Filter CheckAn LED on the control panel illuminates at 6 month intervals to remind users to check and clean the filters.Frost ProtectionThe Kinetic E range benefits from an automatic frost protection system, effective down to -20°C, which manages the airflows to prevent the heat recovery cell freezing in very cold weather, while at the same time maintaining ventilation.Control OptionsThere are two LS (Switched Live) inputs allowing the unit to be connected to a number of sensors and controllers such as Ventwise, Timespan, Ambient Response Humidistat. One of the LS connections also benefits from a ‘Delay-On’ feature which prevents the unit boosting unnecessarily.

Technical

Models

Image of Lo-Carbon Sentinel Kinetic Plus E
Lo-Carbon Sentinel Kinetic Plus E
High efficiency, SAP Appendix Q eligable, residential Mechanical Ventilation with Heat Recovery unit
Please call 0344 856 0590 for further availability information.

Accessories

Image of Filter Pack Kinetic Plus Replacement Standard Filters
Filter Pack Kinetic Plus Replacement Standard Filters
Replacement filter set comprising 2 filters for the Kinetic Plus unit. Installation instructions included.
Please call 0344 856 0590 for further availability information.
Image of Filter: Kinetic Plus M5 Pollen Filter
Filter: Kinetic Plus M5 Pollen Filter
Replacement filter comprising one supply filter for the Kinetic Plus unit. Pack contains one M5 Pollen filter. M5 provides increased performance filtering out most pollens. Installation instructions included.
Please call 0344 856 0590 for further availability information.

Downloads