Product Search Results
58 matching products found (showing 1 - 15)
- Turns on Towel Rail for 30 minutes before defaulting to user setting
- Analogue clock display and integral time switches for ease of setting
- Manual override
- Removable clear plastic cover protects TimeSwitch face
- Volt free changeover contacts
- Time base: 7 days
- Shortest switching time: 2 hours
- Maximum load: 16amp resistive (8amp inductive)
- Ambient operating temperature range -20°C to +85°C
- Ambient operating temperature range -20°C to +85°C
- Ambient operating temperature range -20°C to +85°C
- Separate starter not required when used with HOT SPOT protected fan (SPTK only)
- Compact and easy to install
- Suitable for surface or flush mounting (SP5010 surface only)*
- SP type include ON/OFF switch with neon indicator
- SPTK type include ON/OFF/RESET switch and indication light fan trip indicator and built in facility for manual reset
- Complies with required statutory regulations and carries CE mark
- Separate starter not required when used with HOT SPOT protected fan (SPTK only)
- Compact and easy to install
- Suitable for surface or flush mounting (SP5010 surface only)*
- SP type include ON/OFF switch with neon indicator
- SPTK type include ON/OFF/RESET switch and indication light fan trip indicator and built in facility for manual reset
- Complies with required statutory regulations and carries CE mark
- 3 Speed Settings
- Infra-Red remote control
- Soft touch control
- 8 hour timer
- Oscillation & free neck
- Demand ventilation control for A/C speed controllable fans
- Quick start-up by pre-programmed modes
- IP54 rated
- Total motor protection using thermistor connection
- LCD multifunction display
- 2 x analogue input for sensors (0-10V – separate power supply required, 0-20mA)
- CO2 Control
- Temperature control
- Constant pressure control
- Manual remote speed adjuster (0-20mA)
- Setting range: +6°C to +30°C
- Two internal range limit/locking rings are included to allow setting within a limited temperature range or locking at a fixed t/o point
- IP20 rated
- Sealed sensing mechanism
- Snap-action, single pole, changeover contacts
- Mounting direct on surface only
- Electrical connection to screw type terminals with rear or side cable entry
- Contact rating: 1.5 amp (inductive)
- 16 amps (resistive)
- Max Voltage 250V
- Infinitely variable speed control
- Automatic supply voltage detection
- Adjustable stepless output voltage
- 230 VAC alarm output
- TK monitoring for thermal motor protection
- Contacts for remote on/off switching
- Adjustable minimum and maximum speed limits
- Kick start (default) or soft start
- Run and fault detection LED indication
- Separate starter not required when used with HOT SPOT protected fan (SPTK only)
- Compact and easy to install
- Suitable for surface or flush mounting (SP5010 surface only)*
- SP type include ON/OFF switch with neon indicator
- SPTK type include ON/OFF/RESET switch and indication light fan trip indicator and built in facility for manual reset
- Complies with required statutory regulations and carries CE mark