HR500IP

Passive - no fans
Lightweight - easy installation
Compatible with 315, 250 and 200mm Ø ducting and accessories
Saves Heat - 70% heat recovery
Internal wall mounting
 

Select a product

The HR500IP unit is a semi-remote heat exchange unit with 70% heat recovery, designed for mounting in internal walls for installations using ducted extraction and fresh air supply. The HR500IP unit provides air movement via two independent in-line duct fans to suit length and configuration of ducting systems. The unit is ideal for use with with in-line centrifugal type fans and compatible accessories.

Performance of HR500IP: Up to 244 l/s FID capacity (balanced airflow). Ideal for schools, offices, pubs and clubs, etc.

Fan Options

ACP
ACM
ACQ

Installation
The unit should be set in an inner wall with the grille flange set flush with the inner surface (a steel lintel is provided for additional support of building fabric if required). Automatically produce a 3° slope of the unit away from the inner grille for drainage of any condensate which may form during operation. A 22mm drain is situated between inlet and exhaust spigots and should be connected to a suitable drain/soak away.

DIMENSIONS:

Fitting Hole Size: 610mm × 381mm
Weight: 19kg

Image of HR500IP
HR500IP
Please call 0344 856 0590 for further availability information.

Overview

The HR500IP unit is a semi-remote heat exchange unit with 70% heat recovery, designed for mounting in internal walls for installations using ducted extraction and fresh air supply. The HR500IP unit provides air movement via two independent in-line duct fans to suit length and configuration of ducting systems. The unit is ideal for use with with in-line centrifugal type fans and compatible accessories.

Performance of HR500IP: Up to 244 l/s FID capacity (balanced airflow). Ideal for schools, offices, pubs and clubs, etc.

Fan Options

ACP
ACM
ACQ

Installation
The unit should be set in an inner wall with the grille flange set flush with the inner surface (a steel lintel is provided for additional support of building fabric if required). Automatically produce a 3° slope of the unit away from the inner grille for drainage of any condensate which may form during operation. A 22mm drain is situated between inlet and exhaust spigots and should be connected to a suitable drain/soak away.

Technical

DIMENSIONS:

Fitting Hole Size: 610mm × 381mm
Weight: 19kg

Models

Image of HR500IP
HR500IP
Please call 0344 856 0590 for further availability information.

Downloads