HR500D

Self-contained unit with integral fans
Up to 70% heat recovery
Compatible with 315, 250 and 200mm Ø, ducting and accessories
External wall mounting
 

Select a product

The HR500D is a self-contained unit with integral extract and supply fans to provide balanced ventilation and heat recovery via supply diffusers and extraction grilles. The unit is fully speed controllable.

The compact heat recovery cube interleaves outgoing warm air with incoming fresh air and allows the heat from one to warm the other without the two streams mixing. Energy is saved on room heating with no power being used by the cube itself.

Performance of HR500D: Supply and extract up to 174 l/s FID capacity on heat recovery mode. Ideal for offices, computer rooms, pubs and clubs, etc.

Installation
HR500D is designed for installation in external walls and should be fitted to provide a 3° slope to outside to provide condensate drainage. 

DIMENSIONS:

Fitting Hole Size: 610mm × 381mm
Weight: 19kg

Power Consumption  
 
Supply fan 60.0W
Extract fan 150.0W
Image of HR500D
HR500D
Please call 0344 856 0590 for further availability information.
Image of HR500 Controller (Surface Mounted)
HR500 Controller (Surface Mounted)

With knockouts for recessed wiring or surface wiring. An optional flush fitting box is available. Requires 5-core cable. One controller will operate a maximum of 2 HR500 or HR500X units. On/Off/Sensor mode. Choice of heat exchange or high/low speed extract fan mode. Infinitely variable speed control from low to high. Adjustable minimum speed. With integral thermal cut-out and circuit fuse protection.

Please call 0344 856 0590 for further availability information.

 

Raadpleeg de tab Downloads voor technische informatie

 

 

ESTIMATED RUNNING COSTS

Calculate estimated running costs for this product using the tool below.
For average costs, leave the default values in place or enter your own figures in the boxes to recalculate.


pence
(Your current electricity cost in pence per hour. This will be listed on your electric bill)
hours
(The average number of hours per day fan to run in Trickle mode)
hours
(The average number of hours per day fan to run in Boost mode)

Based on the inputted figures, estimated running costs would be:

Overview

The HR500D is a self-contained unit with integral extract and supply fans to provide balanced ventilation and heat recovery via supply diffusers and extraction grilles. The unit is fully speed controllable.

The compact heat recovery cube interleaves outgoing warm air with incoming fresh air and allows the heat from one to warm the other without the two streams mixing. Energy is saved on room heating with no power being used by the cube itself.

Performance of HR500D: Supply and extract up to 174 l/s FID capacity on heat recovery mode. Ideal for offices, computer rooms, pubs and clubs, etc.

Installation
HR500D is designed for installation in external walls and should be fitted to provide a 3° slope to outside to provide condensate drainage. 

Technical

DIMENSIONS:

Fitting Hole Size: 610mm × 381mm
Weight: 19kg

Power Consumption  
 
Supply fan 60.0W
Extract fan 150.0W

Models

Image of HR500D
HR500D
Please call 0344 856 0590 for further availability information.

Accessories

Image of HR500 Controller (Surface Mounted)
HR500 Controller (Surface Mounted)

With knockouts for recessed wiring or surface wiring. An optional flush fitting box is available. Requires 5-core cable. One controller will operate a maximum of 2 HR500 or HR500X units. On/Off/Sensor mode. Choice of heat exchange or high/low speed extract fan mode. Infinitely variable speed control from low to high. Adjustable minimum speed. With integral thermal cut-out and circuit fuse protection.

Please call 0344 856 0590 for further availability information.

Downloads