Access Pac In-Line fans - PAC

At a Glance:

Cuts a third off the height of conventional in-line fans.
Has been designed to produce minimum noise levels for use where quiet operation is required.
Manufactured in galvanised steel, the range has integral anchorage points to allow the fan to be suspended in any plane.
All models are fitted with Standard Thermal Overload Protection.

FAQ's Answered:

Compact design
Fully speed controllable
Low noise levels, duct borne and breakout.
Motors protected to IP44
Motor Insulation Class B
Circular spigots
Manufacture controlled to BS EN ISO 9001
Performance tested to BS 848 Parts 1 & 2

This product range is now obsolete and no longer available from Vent-Axia. The information here is provided for reference only.

Where round in-line fans just won’t go due to height constraints the Vent-Axia ACCESS PAC is the answer, cutting a third off the height of conventional in-line fans. Available in six sizes.

The casing includes an inclined inlet and bellmouth entry which directs the incoming air to the impeller with minimal turbulence. The result is better air management through the unit, less noise, higher efficiency and an increased performance.

Overview

Where round in-line fans just won’t go due to height constraints the Vent-Axia ACCESS PAC is the answer, cutting a third off the height of conventional in-line fans. Available in six sizes.

The casing includes an inclined inlet and bellmouth entry which directs the incoming air to the impeller with minimal turbulence. The result is better air management through the unit, less noise, higher efficiency and an increased performance.

Technical

Downloads