Vent-Axia Heat Save
heat-save-illustration
Vent-Axia Heat Save

NEW Vent-Axia Lo-Carbon Heat Save

• Suitable for improving indoor air quality in habitable rooms
• Fully customisable ventilation via a control panel
• Easy to install, no need for ducting, wall sleeve included
• Easily maintained with cleanable filter and ceramic heat exchanger
• 5 year warranty for peace of mind
• Up to 84% heat recovery to reduce energy bills
• Anti-frost protection built in
• Replace extracted air with filtered air
• Reduce the home’s carbon footprint and save money on energy bills

Select a product

Through-The-Wall Heat Recovery Unit
The Vent-Axia Lo-Carbon Heat Save is a ventilation unit designed for living rooms and bedrooms in single and multi-family buildings. The unit is usually located in an exterior wall to provide new air to the room.

The Vent-Axia Lo-Carbon Heat Save uses a reversible fan to extract dirty air from the room and replace it with outside air 70 seconds later. This air passes through a filter to ensure that clean air enters the room. These systems work best in pairs as when one unit is extracting, the other can be supplying air to provide a balanced ventilation system. They are controlled by a SENWZP Sentinel wired zone controller which can operate up to 8 units in synchronization. This provides a single room or whole house balanced ventilation system with heat recovery.

As well as filtering the air, the Vent-Axia Lo-Carbon Heat Save uses a thermal accumulator to extract warmth from the outgoing air and uses it to temper the incoming air to avoid the feeling of cold drafts and recover heat that would otherwise be lost to the outside.

Typical Installation
The Vent-Axia Lo-Carbon Heat Save can be fitted in a 180mm diameter hole. Maximum wall thickness is 460mm or 745mm with optional wall tube (see accessories). The wall sleeve length (included up to 460mm) can be cut down to size to fit any wall thickness. Vent-Axia Lo-Carbon Heat Save units work best in pairs. When one unit is extracting, the other can be supplying air to provide a balanced ventilation system. They alternate direction every 70 seconds when the thermal accumulator on the extract unit has warmed up allowing the supply air to benefit from these thermal gains. They are controlled by a SENWZP Sentinel wired zone controller. This is fully modular and controllable with customized ventilation profiles available so that every room in the home can have the perfect ventilation.

HeatSave

PERFORMANCE:

Wall opening: 180 mm
Wall thickness with plaster/render: >290 mm
Supply Air flow: 2.8 - 12.0 l/s
Extract Air flow: 2.8 - 12.0 l/s
Average Air flow: 1.4 - 6.0 l/s
Power consumption: 3W
Sound emission: 18 - 36 dB(A)
Heat Recovery: 84%
Temperature range: -20 - 50 °C

DIMENSIONS:

 

Heat Save

oA ØB C D E ØF
220 200 30 485 20 160

 

 

 

 

 

 

Image of Vent-Axia Lo-Carbon Heat Save
Vent-Axia Lo-Carbon Heat Save

Decentralised ventilation system with up to 84% heat recovery. Compact design for apartments or houses with 180mm diameter, ideal for refurbishment. Includes reversible fan with a thermal accumulator, external wall grille, wall sleeve, dust filter. Requires 1x SENWZP (496037) wired zone controller per installation of 8 units.

Stock Ref. No: 496036
Price £333.41 (excl VAT)
Image of Sentinel Wired Zone Control Panel (SENWZP)
Sentinel Wired Zone Control Panel (SENWZP)
Stock Ref. No: 496037
Price £178.61 (excl VAT)
Image of Spare Inner Cover 220x220
Spare Inner Cover 220x220
Stock Ref. No: 496108
Price £46.07 (excl VAT)
Image of Heat Save PM10 ISO Coarse 60% (formerly G4) filter
Heat Save PM10 ISO Coarse 60% (formerly G4) filter
Stock Ref. No: 496038
Price £23.04 (excl VAT)
Image of External Wall Sleeve 160x745
External Wall Sleeve 160x745
Stock Ref. No: 495328
Price £30.71 (excl VAT)
Image of Spare Wall Sleeve 160x495
Spare Wall Sleeve 160x495
Stock Ref. No: 496105
Price £27.64 (excl VAT)
Image of Spare Reversible Fan
Spare Reversible Fan
Stock Ref. No: 496110
Price £61.43 (excl VAT)
Image of Spare Thermal Accumulator
Spare Thermal Accumulator
Stock Ref. No: 496111
Price £53.75 (excl VAT)
Image of Spare Weather Protection Grille
Spare Weather Protection Grille
Stock Ref. No: 496107
Price £26.11 (excl VAT)
Image of Sound Absorbing Insert
Sound Absorbing Insert
Stock Ref. No: 496109
Price £23.04 (excl VAT)

 

Raadpleeg de tab Downloads voor technische informatie

 

 

ESTIMATED RUNNING COSTS

Calculate estimated running costs for this product using the tool below.
For average costs, leave the default values in place or enter your own figures in the boxes to recalculate.
Where a product has multi speeds, a typical installation has been used for the below calculations.


pence
(Your current electricity cost in pence per hour. This will be listed on your electric bill)
hours
(The average number of hours per day fan to run in Trickle mode)
hours
(The average number of hours per day fan to run in Boost mode)

Based on the inputted figures, estimated running costs would be:

Overview

Through-The-Wall Heat Recovery Unit
The Vent-Axia Lo-Carbon Heat Save is a ventilation unit designed for living rooms and bedrooms in single and multi-family buildings. The unit is usually located in an exterior wall to provide new air to the room.

The Vent-Axia Lo-Carbon Heat Save uses a reversible fan to extract dirty air from the room and replace it with outside air 70 seconds later. This air passes through a filter to ensure that clean air enters the room. These systems work best in pairs as when one unit is extracting, the other can be supplying air to provide a balanced ventilation system. They are controlled by a SENWZP Sentinel wired zone controller which can operate up to 8 units in synchronization. This provides a single room or whole house balanced ventilation system with heat recovery.

As well as filtering the air, the Vent-Axia Lo-Carbon Heat Save uses a thermal accumulator to extract warmth from the outgoing air and uses it to temper the incoming air to avoid the feeling of cold drafts and recover heat that would otherwise be lost to the outside.

Typical Installation
The Vent-Axia Lo-Carbon Heat Save can be fitted in a 180mm diameter hole. Maximum wall thickness is 460mm or 745mm with optional wall tube (see accessories). The wall sleeve length (included up to 460mm) can be cut down to size to fit any wall thickness. Vent-Axia Lo-Carbon Heat Save units work best in pairs. When one unit is extracting, the other can be supplying air to provide a balanced ventilation system. They alternate direction every 70 seconds when the thermal accumulator on the extract unit has warmed up allowing the supply air to benefit from these thermal gains. They are controlled by a SENWZP Sentinel wired zone controller. This is fully modular and controllable with customized ventilation profiles available so that every room in the home can have the perfect ventilation.

HeatSave

Technical

PERFORMANCE:

Wall opening: 180 mm
Wall thickness with plaster/render: >290 mm
Supply Air flow: 2.8 - 12.0 l/s
Extract Air flow: 2.8 - 12.0 l/s
Average Air flow: 1.4 - 6.0 l/s
Power consumption: 3W
Sound emission: 18 - 36 dB(A)
Heat Recovery: 84%
Temperature range: -20 - 50 °C

DIMENSIONS:

 

Heat Save

oA ØB C D E ØF
220 200 30 485 20 160

 

 

 

 

 

 

Models

Image of Vent-Axia Lo-Carbon Heat Save
Vent-Axia Lo-Carbon Heat Save

Decentralised ventilation system with up to 84% heat recovery. Compact design for apartments or houses with 180mm diameter, ideal for refurbishment. Includes reversible fan with a thermal accumulator, external wall grille, wall sleeve, dust filter. Requires 1x SENWZP (496037) wired zone controller per installation of 8 units.

Stock Ref. No: 496036
Price £333.41 (excl VAT)

Accessories

Image of Sentinel Wired Zone Control Panel (SENWZP)
Sentinel Wired Zone Control Panel (SENWZP)
Stock Ref. No: 496037
Price £178.61 (excl VAT)
Image of Spare Inner Cover 220x220
Spare Inner Cover 220x220
Stock Ref. No: 496108
Price £46.07 (excl VAT)
Image of Heat Save PM10 ISO Coarse 60% (formerly G4) filter
Heat Save PM10 ISO Coarse 60% (formerly G4) filter
Stock Ref. No: 496038
Price £23.04 (excl VAT)
Image of External Wall Sleeve 160x745
External Wall Sleeve 160x745
Stock Ref. No: 495328
Price £30.71 (excl VAT)
Image of Spare Wall Sleeve 160x495
Spare Wall Sleeve 160x495
Stock Ref. No: 496105
Price £27.64 (excl VAT)
Image of Spare Reversible Fan
Spare Reversible Fan
Stock Ref. No: 496110
Price £61.43 (excl VAT)
Image of Spare Thermal Accumulator
Spare Thermal Accumulator
Stock Ref. No: 496111
Price £53.75 (excl VAT)
Image of Spare Weather Protection Grille
Spare Weather Protection Grille
Stock Ref. No: 496107
Price £26.11 (excl VAT)
Image of Sound Absorbing Insert
Sound Absorbing Insert
Stock Ref. No: 496109
Price £23.04 (excl VAT)

Downloads